Įrankių bandymų spauda

Raster-Zeulenroda HP40H/K BG04

Sąlyga: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 001669, Lg 33121 Single-sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Max. strip width: 600 mm Max. load capacity: 3,000 kg Max. coil outer diameter: 1,800 mm Expansion: hydraulic Pressure arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading station + decoiler traversing device Includes: Lg 33221 High-Performance Precision Leveler LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Max. pass-through width: 620 mm Number of leveling rollers: 9 Leveling roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Leveling rollers are multi-supported to prevent deflection All rollers driven by distribution gearbox and cardan shafts. Used, as-is ex-stock, immediately available. Refurbishment available upon request. Delivery time as agreed. Hjdpfohigmbex Af Iong Further data coming soon or available on request.

Sąlyga: naudotas, Gamybos metai: 1982, Grinding length: 500 mm Hedpecxxtmefx Af Isng Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic feed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Sąlyga: geras (naudotas), Gamybos metai: 2000, bendras aukštis: 47 000 mm, bendras plotis: 27 000 mm, bendras ilgis: 25 000 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, bendras svoris: 43 000 kg, stūmoklio plokštės plotis: 600 mm, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Light barrier by Sick Hnodpfx Afjtiwgie Ieg Separate control cabinet by Rittal Side walkways/passages Floor-level installation

Gamybos metai: 2003, Sąlyga: naudotas, Pressure 100 t Stroke 10–130 mm Strokes per minute 30–90 spm Throat depth 330 mm Ram adjustment 100 mm Table surface 950 x 660 mm Ram surface 540 x 440 mm Table pass-through opening Ø 230 mm Table height 1000 mm Hedpfora Rr Esx Af Isng Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Press control Beutler Datatech Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation GSW straightening and feeding machine VRMA 40/78, year 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Sąlyga: naudotas, Gamybos metai: 1993, Press force: 100 tons Distance between uprights at front: 1400 mm Stroke: 250 mm Side openings: 400 mm Table size: 1250 x 1100 mm Ram size: 1250 x 1100 mm Hnsdpfx Ajc Uwx Djf Ieg Stroke: 250 mm Speed: Rapid down 400 mm/sec, rapid up 330 mm/sec, under load 24–43 mm/sec Power requirement: 33 kW Weight: 10,000 kg Height: 3,300 mm Width: 1,700 mm Depth: 1,800 mm Table ejector force: 6 tons Cutting stroke damping Pressure, time, and stroke-dependent control Two-hand operation

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Pressing Force: 2,000 kN Table Area: 2,300 x 1,100 mm (W x D) Pass-through Opening: 2 pcs., 700 x 300 mm Distance Between Columns: 2,460 mm Ram Clamping Surface: 2,300 x 1,100 mm Lateral Passage: 740 mm Installation Height: 550 mm (stroke down, adjustment up) Stroke Rate: 30 – 140 strokes/min, infinitely variable Stroke: 20...220 mm Hnedpfxjv T Anlj Af Ieg Ram Adjustment: 150 mm (motorized) Main Drive: 30 kW Weight: approx. 27,500 kg Version/Features: • Siemens + Beckhoff controls • 8-way slide guides • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromotive stroke adjustment • Siemens + Beckhoff controls • Visualization via Beckhoff panel • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks and 4 cam outputs • Ram with 20 mm central slot • Hydraulic die clamps on table and ram • Hydraulic rollblocks for tool change Strip Feeding Line by Kemmerich, consisting of: Uncoiler Type: V 5000 A – SH – 600 – S Load Capacity: 5,000 kg Strip Width: 100 – 600 mm Expansion Range: 470 – 520 mm Coil Outside Diameter: 2,000 mm • Auxiliary motor drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear end plate and 3 plug-in side arms at the front • Hydraulic hold-down roller, motor-driven, laterally adjustable via handwheel • Coil car (stationary, uncoiler moves hydraulically), lifting height 770 mm with 4 limiting rods Straightening Machine Type: RMBMZ 50.600 UF Strip Width: 40 – 600 mm Strip Thickness: 0.5 – 4.0 mm Straightenable Cross-section: 1,200 mm² Number of Rolls: 9 pcs. Roll Diameter: 50 mm Number of Feed Rolls: 2 pcs. Feed Roll Diameter: 100 mm Speed: 3 – 25 m/min Features: • Rolls hardened, ground, and hard-chrome plated • Drive for lower straightening rolls and feed rolls via gear drive • Motorized roll stand adjustment via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rolls can be opened by 100 mm • Feed rolls pneumatically releasable • Lateral strip guide at infeed with handwheel and leadscrew • Outfeed roller basket and loop bridge • Loop control by ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roll Roll Feed Strip Width: max. 600 mm Features: • Rolls hardened, ground, and chrome plated • Driven by gearmotor • Upper roll pneumatically releasable • Height adjustment hydraulic • Lateral strip guide at infeed with handwheel • Roller basket Additional Features: • Pneumatically pivoting loop bridge between straightener and feed • Safety fence around complete system • Uncoiler and straightener on common base frame • Various spare rolls for the straightener The complete system can still be inspected under power at the seller’s site!

Sąlyga: naudotas, galia: 22,06 kW (29,99 AG), perforavimo jėga: 250 t, Eccentric press EBU suitable for insertion work, UV tested Hedpfx Ajv T Dapef Isng Stroke adjustment from 10 to 140 mm Ram adjustment 80 mm Stroke rate 50 /min.

Sąlyga: naudotas, Gamybos metai: 1997, mašinos/transporto priemonės numeris: 150069, Pressing force: 125 t Adjustable ram stroke: 30 - 120 mm Ram adjustment: 100 mm Die height (stroke down, adjustment up): 450 mm Distance between uprights L-R: 1,290 mm Distance between uprights (side-to-side): 450 mm Table clamping surface approx.: 1,250 x 800 mm Ram clamping surface approx.: 1,250 x 650 mm Through-hole in table: 1,050 x 260 mm Strokes per minute: 30 - 220 min-1 Table height above floor: 1,200 mm Power requirement: 39 kW Hjdpfxsuqdhws Af Isng Height above floor approx.: 3,800 mm Dimensions LxWxH: 3,500 x 2,200 x 3,800 mm Machine weight approx.: 21.5 t Standard equipment Electrical overload protection Pneumatic clutch 2 connecting rods Siemens S5 control system Additional equipment Strip shear AI 40 Max. shearing force 10 t Max. strip thickness 4 mm Max. strip width 400 mm Strip cross-section 600 mm² Automation Kaiser feed KWV 400 Max. strip width 400 mm Strip infeed height above table 120 - 300 mm

Sąlyga: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Z293-068, bendras aukštis: 3 800 mm, bendras plotis: 4 000 mm, bendras ilgis: 5 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 500 mm, RASTER ZEULENRODA GHP 400 H/K-08 bandymų presas, pagaminta 2004 m. TECHNINIAI DUOMENYS IR ĮRANGA: Gamybos numeris: Z293-068 Maitinimo įtampa: 400 V Dažnis: 50 Hz Valdymo įtampa: 230 V Jungiamoji galia: 240 kW Nominali srovė: 100 A Hidraulinis slėgis: 320 bar Nominali jėga: 2 x 2000 kN Stalo matmenys: 2500 x 1500 mm Gamintojo HILMA konsolių išnešimas: 1600 mm Įskaitant CNC valdymą, aušinimo įrenginį ir filtravimo ištraukimo sistemą NUORODOS NUMERIS 138 IŠMATAVIMAI IR SVORIS: Hjdpfsw Rggwjx Af Iong 5000 x 4000 x 3800 mm 32000 kg PASTABOS DĖL ATSIĖMIMO: Prekė prieinama nuo 2025 m. spalio mėn. Atsiėmimo data turi būti derinama tam tikrai dienai tarp 2025-10-20 ir 2025-10-31 FCA: 59759 Arnsberg (DE), pakrauta ant sunkvežimio

Sąlyga: naudotas, Gamybos metai: 2000, Pressure: 25 t Stroke: 150 mm Throat depth: 420 mm Installation height: 450 mm Hsdpfx Ajvut N Nsf Isng Table size: 700 x 820 mm Table height above floor: 850 mm Ram area: 600 x 600 mm Approach speed: 370 mm/s Return speed: 370 mm/s Working speed: 18 - 33 mm/s Oil capacity: 300 l Drive power: 5.5 kW Weight: 5.8 t Required floor space (approx.): 1.1 x 2.0 x 2.4 m (LxWxH) Approved for manual loading according to CE standard With electro-hydraulic drive, pressure/time and stroke/position control, cutting stroke damping, mechanical depth stop, two-hand operation