Pjovimo staklės

Rapid GK-1000

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 14018, Rotoriaus skersmuo: 500 mm Rotoriaus plotis: 1000 mm Rotoriaus peiliai: 5 x 2 Statoriaus peiliai: 2 eilės Įėjimo skerspjūvis apie 600 x 1000 mm Tedpfx Aox Alh Ajg Ref Pavaros variklis: 45 kW

Sąlyga: labai geros būklės (naudotas), a truly unique item, approx. 12 x 6 m Tsdpfx Agofi Tmce Rof

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Heavy-duty granulator Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Feed opening: 700 x 1000 mm Open rotor: 600 mm diameter x 980 mm width Rotor knives: 7 Stator knives: 2 Tsdpeufi Rxjfx Ag Rjf plus knife set: 2 Knife setting table

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12599, Rotor diameter: 600 mm Rotor width: 1,450 mm 12-knife rotor Tsdpfx Aek N Iy Nog Rjf 3 rows of stationary knives Feed opening approx. 780 x 1,490 mm Drive motor: 132 kW

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. Tedpfx Agetyyn Hj Rjf 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Gamybos metai: 2016, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, HDPE film washing plant Year of manufacture: 2016 0 operating hours (never put into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim comprising: Wet granulator, type SM 450/600-S5-2 Friction washer / friction separator, type FW 560/3000 Screw conveyor Separation tank (float-sink separation) type TB 500 Mechanical dryer, type TM 1005 Extraction unit, type MFT 55/500 Fine material separator, type HS 500 Tjdpfxjtuui De Ag Ref Electrical control panel

Sąlyga: naudotas, TECHNICAL DATA - Number of Axles: 4 MILLING SPINDLE - Tool Holder: BT30 - Spindle Drive Power: 6.7 kW - Spindle Speed: 10,000 rpm LINEAR AXES - Travel X/Y/Z Axes: 700 x 400 x 300 mm - Rapid Traverse Speed (X/Y/Z): 50 / 50 / 56 m/min - Feed Rate (X/Y/Z): 1 - 30 m/min - Distance from Table to Spindle Nose: 330 - 630 mm TOOL CHANGER - Tool Changer Type: Umbrella - Number of Tools in Magazine: 21 - Tool Change Time: 0.8 sec TABLE - Table Size: 800 x 400 mm - Max. Table Load: 250 kg ELECTRICAL SUPPLY - Supply Voltage: 220 V - Total Power Consumption: 9.5 kVA WEIGHT AND DIMENSIONS Todpfxjvt Eifo Ag Rjf - Footprint: 2,050 x 2,220 mm - Machine Height: 2,497 mm - Machine Weight: 2,400 kg ACCESSORIES - Controller: Brother CNC-C00 - Interface: Ethernet / USB - Electronic Handwheel - Rotary Table: 4th CNC axis integrated * Coolant Tank * with High-Pressure Pump - Internal Coolant Supply (IKZ) - Electrical Transformer

Gamybos metai: 1996, veikimo valandos: 24 222 h, Sąlyga: geras (naudotas), This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in machine storage. The machine dates from 1996 and has relatively low operating hours for its age. – Brand: Dr. Boy Tjdpfx Aspwh Akjg Ref – Model: 80M – Year of manufacture: 1996 – Screw diameter: 42 mm – Shot volume: 200 cm³ – Clamping force: 80T – Operating hours: 24,222

Sąlyga: naudotas, Gamybos metai: 2006, Package dimensions: 400x400 mm Press force 1st stage: 850 kN Press force 2nd stage: 850 kN Press force 3rd stage: 850 kN Steel throughput: < 8 t/h Aluminum throughput: < 4 kg/h Drive power: 50 kW Installation area: 7.5 x 7.2 m Tsdpsltinwjfx Ag Rof Machine weight: 29 t Press box opening: 1.9 x 0.95 m Location: Germany Available: immediately

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock No. 2553 Tsdpfx Agoiyynds Rof 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter 75 mm – 25 L/D, cylinder with blower cooling Screw speed up to 130 rpm Drive: 120 kW – DC (overhauled), belt-driven Heating zones – control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by appointment at our Wuppertal facility. Matching accessories available: > Screen changer > Granulation (strand, hot-cut, or water ring) > Miscellaneous Additional extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your inquiry or visit.