Spaudos konteineris

Avermann MPC 20 PEL

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Iedevwlqqepfx Af Ijtb Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: naujas, mašinos/transporto priemonės numeris: wtcs750s,

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Sujungimo talpa Itedpfx Afsgypd Hj Iob 30-32 m³ sraigtiniams presams, galima dešinėje arba kairėje pusėje. naudotos, veikiančios sujungimo talpos nuo 4000 €, priklausomai nuo būklės, be PVM. Galimas pristatymas.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. Itedpfxsvgrh Uj Af Isb We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: naudotas, Gamybos metai: 1988, veikimo valandos: 1 h, mašinos/transporto priemonės numeris: V 516, bendras plotis: 2 000 mm, bendras ilgis: 7 000 mm, bendras aukštis: 1 800 mm, darbinis slėgis: 300 juosta, spaudimo jėga: 90 t, aliuminio lakšto storis (maks.): 5 mm, galia: 11 kW (14,96 AG), tuščias svoris: 16 000 kg, pjovimo jėga: 90 t, paskutinio kapitalinio remonto metai: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Itsdpfxolhqd Ro Af Isb Aluminum throughput: 2,000–3,000 kg/h Drive power: 11 kW Footprint: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or with oil drip tray Location: Austria Available from: 30/01/2026

Sąlyga: paruoštas naudoti (naudotas), Presavimoji Hsm HL 4809 LI Iodpfjra Dddsx Af Iotb - Didelė užpildymo anga, idealiai tinka didelėms dėžėms - Konteinerio vartymo įtaisas patogiam užpildymui Jėga kN: 480 - Įtampa/dažnis: 3 x 400 V / 50 Hz - Balo svoris kg (priklausomai nuo medžiagos): iki 400 kg - Balo matmenys ilgis x plotis x aukštis mm: 1200 x 1100 x 750 - Įrenginio matmenys ilgis x plotis x aukštis mm: 5648 x 1849 x 2515 Tuščios eigos ciklo laikas sekundėmis: 53 - Rankinis surišimas: 4 kartus viela

Sąlyga: naujas, Gamybos metai: 2025, Klanke roll splitter for efficient shredding of scrap rolls. Features: - Automatic safety lock - Knife guard - Emergency stop pull cord - Siemens PLC control Technical data: Blade length: 1500 mm Cutting channel opening: 800 mm Ijdpfxon Hy H Ns Af Ietb Motor power: 7.5 kW Cutting force: 30 t Made to order Price and further information upon request. We will be happy to provide you with a non-binding offer.

Sąlyga: naujas, Gamybos metai: 2025, Variklio galia 7,5 kW - Pjovimo jėga 30 t Pjovimo kanalas skirtas - maks. ritinio ilgis 1500 mm - maks. ritinio skersmuo 850 mm - Mašinos svoris apie 3500 kg Iedpfx Aegl Adzef Ietb - Bakelio talpa apie 110 litrų - Rankų apsauginė grotelė valdymo pulto zonoje ir priešais jį - Peilio užraktas - Skaldymo stalas tiesus - Dokumentacija vokiškai 2 egz. (1x tekstinė forma, 1x CD) - Dažymas RAL 5012 - šviesiai mėlyna Apsauginė grotelė/peilio sijos RAL 1028 melioninė geltona Mašina sandėlyje, galima nedelsiant Kaina ir daugiau informacijos pagal užklausą

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Breite des beschichteten Bahnmaterials: 1.315 mm Maximale Bahnbreite: 1.330 mm Maximale Hülsenbreite mit Expandier-Spannköpfen: 1.300 mm Isdpfxewqdikj Af Ietb Maximale Hülsenbreite mit Standardkonen: 1.340 mm Minimale Bahnbreite: 650 mm Abwickler-Rollendurchmesser: 1.000 mm Aufwickler-Rollendurchmesser: 1.000 mm Hülsendurchmesser - Abwickler: 3'' = 76 mm & 6'' = 152 mm - Aufwickler: 6'' = 152 mm Maximale Bahnspannung - Abwickler: 40 kg (400 N) - Aufwickler: 55 kg (550 N) Taper-Spannung am Aufwickler bis zu 60 % des eingestellten Wertes. Minimale Bahnspannung - Abwickler: 2 kg (20 N) - Aufwickler: 4 kg (40 N) Maximales Rollengewicht: 1.000 kg Maximale mechanische Geschwindigkeit: 450 m/min

Sąlyga: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Svoris 4950 kg, bendras svoris 12000 kg Itedpfxswpmcko Af Iob Galia 5,5 kW