Siūlų pjaustymo staklės

RAGNAR HYDR 5-36

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), 2 Cat EK DMR Cgodetu Nmdopfx Aahsp

Būklė: naujas, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and duty cycle deliver outstanding arc characteristics for industrial MIG/MAG applications. Integrated synergic controls make setup simple and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to ensure perfect quality. MULTIPROCESS MIG/MAG: Codpfx Aomxkdpsahogp - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire (polarity reversal): Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Būklė: geras (naudotas), Technical data: Cjdpfxowkaale Aahsgp Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum prebending: 4.0 mm Top roll diameter: 210 mm Side lower roll diameter: 210 mm Central lower roll diameter: 210 mm Conical bending device by tilting both side rolls Hydraulic drop-end bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller assumes no liability for typographical or data transmission errors. The machine's visual condition, technical state, and level of wear are consistent with its age; used machines are sold without any warranty.

Gamybos metai: 1997, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: GO 832 833, Demag ELKE overhead crane crane runway bridge crane indoor crane crane 2 units available!!! Load capacity / lifting capacity: 1.6 tons (1600 kg) Track gauge: 11,785 mm, external dimension approx. 12,000 mm Csdpfx Aasum I Akjhjgp Year of manufacture: 1997 with pendant control Lifting height: 3 m Overall height: from top edge of crane girder to bottom edge of hook approx. 900 mm End carriage length: approx. 200 cm The crane is dismantled and available immediately. Matching power rails can also be supplied. Please inquire. Very good condition, inspection logbook is available. Column-mounted and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible – please provide postal code for quotation. Collection preferred.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, rankos pasiekiamumas: 1 300 mm, Tobulas paketas jūsų suvirinimo automatizacijai su naujausios kartos UR10e robotų serija – nebeįsigykite CB serijos! Norite automatizuoti savo suvirinimo darbus naudojant kobotą, kad įveiktumėte būsimus iššūkius? Tuomet OH-au2mate Cobot Welding Solutions su Lorch maitinimo šaltiniu yra kaip tik jums! Idealus suderintas paketas apjungia: Csdst S U Aujpfx Aahegp - aukštos kokybės robotų technologiją iš kobotų rinkos lyderio Universal - inovatyvią suvirinimo technologiją iš Lorch - intuityvią valdymo programinę įrangą Tiksli rinkinio sudėtis: suvirinimui paruoštas UR10e robotas, valdymo elementai, degiklio laikiklis, Translas 8XR ištraukiamasis degiklis, Lorch S5 400A maitinimo šaltinis.

Būklė: beveik kaip naujas (parodų įrenginys), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW 400V/50Hz Cgodpfspgmufjx Aahjp Weight: 110 kg Technical data and dimensions: subject to change/errors excepted

Būklė: naujas, Gamybos metai: 2024, Kudu drilling and milling center with CNC control and tool changer (3-axis) Drilling and milling center with movable machining unit – the worktable remains stationary while the drill head moves. The drilling center enables both manual and fully automatic operation. After each drilling process, the machining unit automatically moves in the X and Y axes to the next drilling position. Operation is designed to be extremely user-friendly. Data can be transferred to the machine control using DXF/DWG file formats via a programming station. Alternatively, the system can also be programmed directly on the machine control panel. The system is extremely robust and constructed using proven machine components. Technical data: • Measuring length: 6,000 mm • Overall length: 8,050 mm • Sturdy machine base • Drill head speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • X, Y, and Z axis driven by servo motors • Rapid traverse (X-axis): 20 m/min • Rapid traverse (Y-axis): 5 m/min • Distance table top to lower edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in mild steel (tool dependent) • Tapping: M4 – M30 (with floating chuck) • Y-axis travel: 300 mm • X-axis tolerance: ±0.1 mm • Y-axis tolerance: 0.06 mm • Z-axis tolerance: 0.06 mm • Main spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light curtain • Rear access protection via machine fence • Control: 21.5" touchscreen panel, reinforced front glass Cgsdpfx Aaofu Ivzehsp • Simple programming at the machine • Capable of milling slots and circles • Lubrication via minimum quantity spray system • Without material clamps • Remote maintenance possible via TeamViewer (LAN interface) • Tool magazine for drilling tools, including dimensions and speeds • Simulation of work sequences • Digital handwheel Your advantages: • Protects workpiece surfaces • Clear, graphical user interface • Machining directly at the workpiece end is straightforward • 50% space saving compared to moving-table designs • Chips are collected in a chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are eliminated by CAD/CAM integration You are welcome to visit and inspect the desired machine at our manufacturing/showroom at any time. Please feel free to contact us. Plantec Maschinen GmbH

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw blade length 3375x27x0.9 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right Cgoded Iipxepfx Aahjp - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system

Būklė: naujas, NEBES TM 275 Bandsaw – 400 V Three-phase, NEW “CE” Induction motor Cast iron frame Adjustable cutting angle from 0° to 60° Fully cast iron structure Electric pump for blade lubrication and cooling Blade tension gauge in oil bath Front controls and two cutting speeds Selector switch for excluding the coolant pump Blade guide with carbide pads (H.M.) Round cutting capacity at 0°: 220 mm Square cutting capacity at 0°: 200 x 200 mm Rectangular cutting capacity at 0°: 230 x 185 mm Round cutting capacity at 45°: 150 mm Square cutting capacity at 45°: 150 x 150 mm Rectangular cutting capacity at 45°: 150 x 200 mm Round cutting capacity at 60°: 90 mm Cgjdpfxoh Nm Nco Aahop Square cutting capacity at 60°: 90 x 90 mm Rectangular cutting capacity at 60°: 90 x 120 mm Motor power: 1.3 HP Voltage: 400 V Blade dimensions: 2450 x 27 x 0.90 mm Weight: 265 kg

Būklė: naujas, Gamybos metai: 2024, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Art. No. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned on the X-axis at the desired location, clamped, and drilled. All you have to do is press the start button. Round tubes, rectangular tubes, angle profiles, as well as flat and solid materials can be conveniently clamped pneumatically into the horizontal gripper of the positioning system. After simply entering the X-values or recalling an already programmed process, the unit operates entirely autonomously. The Y-axis can be adjusted by the operator via a manual handwheel with digital display. Advantages • Sequences of holes are carried out automatically at precise intervals. • Operative errors are drastically reduced. • Programming is completed in just a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower requirements. Fully automatic design Measuring length: 6,000 mm Overall length: 13,500 mm NC single-axis control Pneumatic vise (clamping width 200 mm) Minimum quantity lubrication unit with holder and spray nozzle Drilling machine: Unimax 3T AV (see technical data on datasheet) Cjdpfofu Itbsx Aahogp Anti-rotation device Motorized height adjustment Thread-cutting unit NC Positioning System PD 200p Feed force: 200 kg Positioning possible by absolute and incremental dimensions Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel carrier profile for contamination protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting brackets / Roller width 407 mm / Insert plates / Bracing / Roller diameter 50 mm / Steel rollers Plantec Maschinen GmbH