Apdirbimo centras

Röders Tec RP 800

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Portal machining center for HSC milling Iasdpfx Aovri Nmsb Sop The machine operates within a Röders RCM Automation system. It can therefore be integrated into an automated manufacturing environment. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Spindle speed: 36,000 rpm – Fischer motor spindle - Spindle taper: HSK E50 - Feed rate: up to 60 m/min Work table - Dimensions: 900 mm x 700 mm - Max. workpiece weight: 800 kg Control - Röders HSC RMS6, including software for: Milling simulation and pocket machining - Electronic hand controller and mouse - Ethernet interface integrated into Windows NT - Remote maintenance capability for RSM 6 machine control Machine construction - Portal design with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for the milling spindle - Infrared measuring probe for automatic: Tool length compensation, diameter measurement, and tool breakage detection - Microjet spray cooling and lubrication unit - Fixed bearing and spindle nuts are water-cooled - Full safety enclosure (crane loading possible) - Connection for workspace extraction system - 2 chip conveyor screws - Workpiece cleaning via separate air nozzles Machine data - Footprint (excluding service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and servicing have been carried out regularly. A demonstration under power and in operation is possible by prior appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Iedpfx Asfg Rlcjb Ssap Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Gamybos metai: 2020, būklė: naujas, Available ex stock Iajdpfx Ajiryf Sob Sjp Band dimensions: 4420 x 34 x 1.1 mm Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm Bundle cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Main drive motor power: 3.75 kW Hydraulic pump motor power: 0.75 kW Coolant pump motor power: 0.125 kW Table height: 755 mm Weight: 1680 kg Dimensions (W x D x H): 2400 x 2120 x 1840 mm

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw blade length 3375x27x0.9 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system Iaedped Iipxjfx Ab Sep

Būklė: naujas, Gamybos metai: 2024, pjovimo aukštis (maks.): 150 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 108 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 108 mm, BERG+SCHMID Double Mitre Bandsaw GBS 218 Eco AutoCut Cutting speed: 25-80 m/min • Mitre angle left: 60° • For cutting steel, stainless steel, and aluminium profiles • Quick-release vice with fast clamping device • Integrated blade tension control • Carbide blade guides • Electric coolant system • Machine base supplied disassembled The AutoCut system consists of: • Hydraulic cylinder, feed control, spring assembly, limit switch, and enables three operating modes: 1. Automatic saw frame lowering via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at end of cut 2. Rapid lowering of the saw frame from rest position to the workpiece, then switching to normal feed rate Iodjt I R Edopfx Ab Sjap 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc., available on request! Delivery time: from stock Waiblingen Beinstein

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Control: Heidenhain TNC 640 Working Area Travel X: 1,020 mm Travel Y: 520 mm Travel Z: 610 mm Clamping Surface (L x W): 1,160 x 520 mm Table Load Capacity: 750 kg Spindle Speed: 15,000 rpm Direct Drive Tool Holder: SK40 (BigPlus) DIN 69872 General Tool Changer: 30-position (double gripper) Machine Bed: High-strength Meehanite cast iron Repeatability: 0.008 mm Chip Management: Chip conveyor including chip flushing within the work area Coolant Management: Internal coolant supply (ICS 30 bar) Cooling Air: Programmable external cooling Temperature Management: Automatic spindle chiller Run-in Support: Electronic handwheel Workpiece and Work Area Cleaning: Rinse and compressed air gun Coolant Cleaning: Oil skimmer Isdpfx Abot Dizvj Seap Network Connectivity: Ethernet interface

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras charger - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table centre to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] Iedpfxsw Ephbs Ab Seap - Total drive capacity: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Controller: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic hand wheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probing system - Workpiece probing system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vise - Tool holder

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Siūlome naudotus įvairius 3R sistemos komponentus. Sistemos yra labai geros būklės ir visiškai funkcionalios. Apžiūra galima pagal susitarimą. Poz. 1: System 3R-203 – WEDM sukimo elementas, 360°. Poz. 2: System 3R-201J – WEDM adapteris, 90°. Poz. 3: System 3R-201J – WEDM adapteris, 90°. Poz. 4: System 3R-201J – WEDM adapteris, 90°. Poz. 5: System 3R-202 – MiniBlock. Poz. 6: System 3R-202 – MiniBlock. Poz. 7+8: System 3R-204 – WEDM aukščio reguliavimo adapteris. Poz. 9: System 3R-218/30S – laikiklių rinkiniai. Poz. 11: System 3R-602.21 – rankinis Macro spaustukas. Poz. 12: System 3R-294.3 – spaustuvai. Poz. 14: System 3R-292.3 – SuperVice. Poz. 15: System 3R-293.3 – SuperVice. Poz. 16: System 3R-292.06 HP – SuperVice Magnum. Poz. 17: System 3R-200-4J-2, 470 mm; System 3R-200-4J-2, 470 mm; System 3R-200-4J-2, 330 mm; System 3R-200-4J-2, 138 mm. Poz. 18: System 3R-239–545 0006-V01; System 3R-239–495. Siuntimas ir apžiūra galimi! Iajdpexqn Ubsfx Ab Sop

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, Uždarymo jėga: 110 t Sraigto skersmuo: 22 mm Įpurškimo tūris: 41 cm3 Sraigto L/D santykis: 20 Apskaičiuotas darbinis tūris: 41,8 cm3 Tinkamas įpurškimo slėgis: 2 864 bar Maks. sraigto apsisukimų dažnis: 500 min Sraigto sukimo momentas: 150 Nm Antgalio kontaktinė jėga: 250/40 mm/kN Išorinis įpurškimo debitas: 76 cm3/s Iaedpfsu Eki Sjx Ab Sep Cilindro šildymo galia: 6,3 kW Šildymo zonų skaičius: 4 Tipas: Horizontalus Pavara: Elektrinė

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 35 + 70 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.42 t Space requirements: approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° left and 45° right Iaodpfxourc S Rs Ab Sjp - Ball bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system