PROLOGIC langų konstravimo programinė įranga

PROLOGIC FenOffice 14 Prologic

Gamybos metai: 2018, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vacuum Membrane Press Wemhöner Type VARIOPRESS Model Basic 1000 S Technical Data: Heated platen size (mm): 2850 x 1550 Heating plate configuration: Upper electrical heating plate in aluminium Total pressing force (kN): 2400 Maximum chamber pressure (bar): 6 Maximum operating temperature: 180 degrees Celsius Maximum batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film on rolls: film width approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connections: Podov Np H Hepfx Aldsgk Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Gamybos metai: 2001, veikimo valandos: 123 h, būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 123, Chip silo, diameter: 5 m, height: approx. 8 m, net capacity: 42 m³. Suitable for the storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time, by prior arrangement. Pgodeftdv Uepfx Aldsk

Būklė: geras (naudotas), Gamybos metai: 1992, Single Piece Wood Sander Sanding top & bottom Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start-up Pneumatic belt tensioning Main switch Sanding belt oscillation Top and bottom finishing brush unit, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed & outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Technical details and prior sale subject to change. • Stated prices are ex works (location) - loaded free of charge! • Machines have been cleaned and function-tested. • All machines are sold as seen without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!) Pgjdpfx Aswyda Ueldek

Būklė: labai geros būklės (naudotas), Genini Miniautomat Through-Feed Automatic Lathe Automatic lathe for processing square timber Main spindle with two-speed motor: 4.9/5.9 kW Hydraulic pump motor: 1.5 kW Maximum workpiece length: 950 mm Maximum turning length: 120 mm Pedpfsv Hgctox Aldegk Maximum turning diameter: 80 mm Two carriages with profile cutting tools 1 face spindle for drilling or face profiling 1 rough turning tool Machine weight: approx. 1800 kg

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: b-r-l-t-t-b Maximum spindle speed: 8,000 rpm Pgedpfxerq Ebfs Aldjk Spindle diameter: 40 mm Powerlock tool holder Chamfering unit included Separate motor for each spindle Electronic feed with brake, infinitely variable 5-40 m/min Durofer spike-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS SYSTEM CE mark Declaration of conformity

Būklė: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring Pedpfsvu Hgbjx Aldogk - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: naudotas, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for single parts with rinse cycle. ----- Function features: Machine for horizontal flooding of single parts. The product is applied via a row of nozzles. Excess product is blown off by air jets. The pump and the air jets are automatically controlled and are only activated when a workpiece is passing through. This reduces compressed air consumption. The recirculation mode ensures minimal product usage. ----- Construction features: Structure Robust steel frame, painted with high-strength, water-soluble products. Machine body made of thick, hot-welded polypropylene panels. 4 independent chambers for infeed, flooding, blowing, and outfeed. Horizontal workpiece feed Via motor-driven grooved plastic rollers. Electric inverter for adjusting and changing the feed speed. Transmission Psdpfxonl Nqqo Aldogk The machine is equipped with an exclusive system that positions all transmission components outside the flooding chamber for easy operator access, ensuring longer operating life and facilitating maintenance operations. Moving components are protected by covers and appropriate seals. Recirculation pump Pneumatic double diaphragm pump with valves, seals, and diaphragms made of nitrile rubber, and a housing made of plastic material (PVDF). Air jets The first chamber features an air-blow system to prevent product leakage. A second air-blow system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for setting the feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3–6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be impregnated mm 250 Max. width of workpieces to be impregnated mm 300 Max. height of workpieces to be impregnated mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinse circuit for Pro Flow ----- Price of the above machine: on request! Plus packaging and transport ----- (Technical specifications as per manufacturer – without guarantee! Illustrations may differ from the original, prices net, plus VAT (domestic))

Būklė: beveik kaip naujas (naudotas), Profile grinding machine Utma model P20 Pgodpfx Aeff H E Rsldsk

Būklė: labai geros būklės (naudotas), SCM Flex 1 Tenoning and Milling Machine Spindle diameter: 40 mm Total spindle height: 200 mm Pgodpfx Aljwtf Adodsk Double-speed motor: 6.6/8 kW Variable speed by belt: 3250/6500 and 5000/10000 rpm Electric spindle lifting Maximum cutter diameter: 270 mm Scoring saw unit: 2.2 kW Automatic side carriage Pneumatic material clamps Four-roller feed unit

Būklė: labai geros būklės (naudotas), Four-sided planer SCM Compact XL - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindles each driven by a 7.5 kW motor, top spindle: 5.5 kW, universal spindle: 5.5 kW Pgsdpfx Aljlat Hdedek Machine in very good condition