Diskinės žirklės

Prinzing KSE 25/10

Būklė: naujas, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special features included in the price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetrical 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swiveling upper roll • Conical bending device • Foot switch Technical details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm Ncjdjg Tzbhspfx Acpjr • Motor power: 1.1 kW • Dimensions L-W-H: 2100 x 760 x 1250 mm • Weight: 470 kg

Gamybos metai: 2009, būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 527, Offer 23035 Technical specifications (approx.): - Punching force: 30 t - Max. sheet thickness: 10 mm - Max. punching diameter: 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke: 7 – 70 mm - Throat depth: 560 mm - Max. strokes per minute: 120 spm - Single stroke / continuous stroke - Drive: 400 V / 4 kW - Space requirement (approx.): W 8000 x H 1850 x D 1700 mm - Weight (approx.): 1900 kg Includes: - Stop table with stops - Foot switch - Emergency stop button Ncodpolnkc Uefx Acpjr - Quick-change punch system - Various punch and die holders

Gamybos metai: 1979, būklė: naudotas, Reach: 22/29 mm Drive motor: at 380 V approx. 0.55 kW Space requirement: 450 x 500 x 560 mm Ncjdpfx Acezif Sopor Weight: approx. 6.5 kg Pressing force: 30 kN

Būklė: naujas, Gamybos metai: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roll diameter: 110 mm Lower roll diameter: 110 mm Bending roll diameter: 110 mm Total power requirement: 1.1 kW Machine weight: approx. 0.9 t Space required: approx. 2.5 x 0.6 x 1.1 m New machine Cone bending device, hardened and ground rolls, motorised bending roll stationary control panel, digital display for the right and left bending roll, digital display for the lower roll Ncodpfx Aevx Uvxscper

Būklė: naujas, Gamybos metai: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - NC control system - includes bending pin - includes tool holder for dies and foot pedal - Pressing force: 40 tons - Infinitely variable stroke adjustment - Adjustable working speed Max. working stroke: 10 mm/sec Return stroke: 20 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed table Ncodpfx Acoqvm Ukoper - Weight: 1,000 kg - Bending capacity: Flat material: 150 x 22 mm Round tube: up to 60 mm

Būklė: naujas, Fastech 3-Roller Plate Rolling Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1250 mm Sheet thickness (max.): 3.0 mm Pre-bending thickness: 2.5 mm Roller length: 1250 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (L x W x H): 1950 x 900 x 1130 mm Motor power: 1.1 kW Features: - Electrically driven top and bottom rollers - Swing-out top roller - Conical bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operation panel - Safety cable Ncedpfxshzq Dqo Acper - Values valid for St-37 / 240 N/mm² - CE mark

Būklė: naujas, Bending tools/punches for Trumpf press brake, H256mm, L500mm, L550mm, segmented. Ncjdpfx Aoiimz Rscpsr

Būklė: naudotas, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Nsdpfx Aofn Aqmscpscr Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: Expanding range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. (specify dimensions) Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and freshly repainted.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, Thalmann THAKO 30 Darbinis plotis: 8,20 m Lenkimo galia: 3,0 mm Pagaminimo metai: 2010 Ncedpoyl Tvujfx Acper Naujas jutiklinis ekranas

Būklė: naujas, Fastech 3-Roll Plate Bending Machine FRM 1050 x 90 Technical Specifications: Special features included in the price: - Hardened rolls - Motorized rear roll adjustment - Digital display Sheet width: 1050 mm Sheet thickness max.: 3.3 mm Sheet thickness pre-bending: 3.0 mm Roll length: 1050 mm Roll diameter: 90 mm Smallest bending diameter: 130 mm Weight: 475 kg Dimensions (L x W x H): 1750 x 800 x 1130 mm Ncsdshzq Dbspfx Acpor Motor: 1.1 kW Equipment: - Top and bottom rolls electrically driven - Top roll swiveling - Conical bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operation panel - Safety cable Values apply for St-37 / 240 N/mm² CE marking