Balu presas

Presto CC 20 M

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Kledpfxsvwlqqe Af Iel Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, 1) Bobst Dynaload Prefeeder, Jahr 1998 2) Bobst Flexo 160, Baujahr 2002 5 Farben, Vakuumtransport, Gummiwalze Bobst CUBE 3) Bobst SPO 160 A Matic, Baujahr 2002 Einführung von Saugnäpfen Center Line II Ausbrechstation mit motorisierter Quick-Lock-Werkzeugspannung Auslage mit Greifer-Ausstanzabfall-Entnahme Bobst CUBE 4) Castaldini Breaker, Baujahr 2007 Ksdpfx Aev Nywvjf Iell

Sąlyga: naudotas, Gamybos metai: 1988, Bobst Flexo 1604 Printing Machine, bottom printing, 4 colours, equipped with anilox cylinders 120 l/cm and 80 l/cm. Bobst Transfer BOBST SPO 1600 Flatbed Die Cutter, max format 1100 mm x 1600 mm / 43.3" x 63", with 4 bottom-side printing units plus MPA, sheet transport with traditional rollers. Kledjv Ifpuopfx Af Ijl - Anilox cylinders with 120 and 80 lines - Open steel doctor blade chamber - Vacuum feeder - Die cutting section - Waste stripping section - Centerline II - High pile delivery with two lifting platforms - Max sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Min sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Cutting force: 400 t - Materials: E, B, C flute, CB, BE - Max speed: 6,000 sheets/hour Possibility to sell machines separately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, 2 identical machines available, manufactured in 2021. The machines were only operated for a short period in test mode in a large warehouse and were then professionally dismantled and stored. Therefore, they are in very good, fully functional condition. Full machine documentation is available. The XF / XP 111 M is a fully automatic strapping machine with a top sealing unit. It is designed to vertically strap a large number of pallets of varying sizes using PP or PET strapping. This system is reliable, easy to operate, and thanks to its compact dimensions, can be installed even in confined spaces. - For PP and PET strap - Vertical strapping - Tension up to 5,500 N - Siemens PLC S7 - Compact, minimal space requirements - Easy access to all mechanical components Kledpfow Htz Iex Af Iel - Easy operation via touchscreen The machines have been professionally dismantled and stored and are available immediately. Additionally, 90 brand new, original Cyklop OVP rolls of strapping are optionally available.

Sąlyga: naudotas, COMPLETELY REFURBISHED BIMAC CE STANDARDS YEAR 2014 STAR FEED INTRODUCTION 3 TOP PRINTING UNITS COMPUTERIZED SLITTER ROTARY DIE-CUTTER Kodjvnrqropfx Af Ijll FOLDER WITH ERO GLUING UNIT COUNTER WITH EJECTOR EMMEPI STRAPPER SPARE CREASING AND CUTTING KNIVES

Gamybos metai: 2002, Sąlyga: beveik kaip naujas (naudotas), Edelstahl-Schrumpftunnel Schrumpftunnel zum Verpacken von Produkten mit Stretchfolie, Hersteller: Schur Maschinentyp: E 340 Baujahr: 2002 Komplett aus Edelstahl gefertigt Kodpfx Afehqfnlj Ioll Tunnelöffnung: 750 x 400 mm Wurde lange Zeit nicht genutzt, daher nahezu neuwertig!

Sąlyga: paruoštas naudoti (naudotas),

Gamybos metai: 1989, Sąlyga: naudotas,

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (parodų įrenginys), We are offering here an as-new machine for gluing boxes, including a corner gluing unit and numerous high-quality tools. Box formats: Kjdsg U Irwspfx Af Ijll Minimum: 80x65x10 mm Maximum: 430x350x120 mm Further details and pricing available upon personal consultation.

Sąlyga: geras (naudotas), Gamybos metai: 1992, Faltschachtelklebemaschine JAGENBERG + halbautomatischer Packer TÜNKERS Modell: DIANA 90-2 Baujahr: 1992 – Seriennummer: 10.45183 Verarbeitbare Schachteltypen: Längsnahtschachteln, Automatikboden-Schachteln Material: Karton 200 g/m² – 800 g/m² Max. Format: 900 mm, Min. Format: 450 mm Geschwindigkeit: bis zu 450 m/min Kaltleimaggregat HHS mit 2 Leimköpfen Pneumatischer Pressbalken Schachtelzähler + Ausstoßer Halbautomatischer Packer TÜNKERS FAS 480, Nr. 12/30381, Baujahr 1993 Klsdpfx Asv N Uptjf Isl Anschlusswert: 27 kW Elektrischer Anschluss: 380 V Gesamtlänge: 12,8 m Gesamtbreite: 1,5 m Gesamtgewicht: 6.500 kg Maschine aktuell in Produktion und in gutem Zustand Verfügbarkeit: Standort: Europa