Padavimo sistema

PODAJNIK DO PIŁY/ STRUGARKI/ OPTYM

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Hfedsuz If Nepfx Ahask Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Variklių skaičius: 1 vnt. Darbinis ilgis: 2500 mm Valdymas: nėra „Hecht ES 350“ – vienpusė stiklo juostų pjovimo staklė Hfsdpfovpr N Rox Ahaek ----- Pasukimas pneumatiniu būdu, atremiant į fiksuotus atraminius elementus. 45º/90º/135º Su pneumatiniu pjovimo disko stūmimo mechanizmu Pneumatinis pasukimas per rankinį pasukimo atraminį elementą Su staklės pagrindu, pneumatinis įtempimas Pjovimo diskas HM 350 x 3,0/2,2/30 Z 100 Pjovimo stendo matmenys: ilgis 700 mm, gylis 1600 mm, aukštis 1500 mm Atraminis elementas 1,5 m Atrama 1,5 m su atramine konstrukcija Atraminis elementas 3 m Atramos ilginimas nuo 1,5 m iki 3 m su atramine konstrukcija Stalo įdėklai su grioveliais, skirti apdorotiems stiklo juostoms „HECHT ASB“ – rankinis ilgio atraminis elementas su skaitmeniniu ekranu, 2500 mm Su dulkių surinkimo įrenginiu (techninės specifikacijos pagal gamintojo duomenis – be garantijos!)

Būklė: naudotas, Volelių komplektai profilių lenkimo mašinai, 3 volelių žiedų lenkimo HERKULES WETZLAR Voleliai tinka HERKULES WETZLAR BO 238 N tipo profilių lenkimo mašinai Ašies skersmuo: 60 mm su 18 mm pleištu 2 vnt. volelių komplektas Nr.1, volelio skersmuo 110 mm, volelio plotis 180 mm 2 vnt. volelių komplektas Nr.2, volelio skersmuo 160 mm, volelio plotis 40 mm 3 vnt. volelių komplektas Nr.3, volelio skersmuo 150 mm, vamzdžio skersmeniui Ø 33 mm, volelio plotis 87 / 115 mm - 3-čio komplekto voleliai su adapterio žiedu nuo Ø 93 iki Ø 60 mm be pleišto Mašina turėjo 2 varomus volelius Visų volelių svoris 57 kg Gera būklė Hfedpfjglaq Isx Ahajk

Būklė: naudotas, Gamybos metai: 1988, Technical details: Hfjdpfjw D Aq Tex Ahaok Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Feed rate: 0.5 – 6 mm/s Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories

Būklė: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding Positioner KT 300 Load Capacity Horizontal: 300 kg, Tilted: 150 kg Power Supply: 220V, 50 Hz Table Diameter: 450 mm Height: 500 mm Tilt Range: continuously adjustable via geared crank motor 0 - 90° Rotation Speed: 0.3 to 2.5 rpm Incl. foot remote control Hfsdpfx Aec Ug Tlshajk Optional extra: Quick-action chuck Diameter: 300 mm, €450.-

Gamybos metai: 1980, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Clearance hole in table: 165 x 125 mm - Max. installation height: 220 mm Hodpfxjktg Dho Ahajfk - Ram surface: 240 x 150 mm - Pin hole in ram: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), Max. bar diameter 65 mm Max. bar length 3000 mm Hjdpoin Hkmefx Ahaofk

Būklė: naujas, Saw blade diameter: 350 x 32 mm Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 x 105 mm Cutting capacity at 90°: flat 180 x 70 mm Cutting capacity at 45°: round 120 / 110 mm Cutting capacity at 45°: square 100x100 / 95x95 mm Cutting capacity at 45°: flat 135 x 60 mm Speed: 1700 / 3400 rpm Control system: MEP NC Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 290 kg Dimensions (L x W x H): 1240 x 1360 x 1800 mm Features: - NC semi-automatic high-performance circular saw * for cuts from 45° right to 45° left * suitable for aluminium and light metal alloys - MEP microprocessor controller * user-friendly interface with display and mechanical buttons * saw head start and end positions can be saved - manually operated safety hood - mechanical stops at -45°, 0°, +45° * enable quick positioning of the saw head - pneumatic vice with quick clamping * pneumatic clamping system allows adjustment of clamping pressure * depending on the hardness of the material being cut * optional pneumatic vertical vice available - robust cast iron construction ensures vibration-free operation & maximum precision - the saw head can also be tilted up to 45° - two saw speeds - base frame with lockable door - pneumatic coolant lubrication - machine base Scope of delivery: - adjustable length stop 600 mm - tool kit - mounting adapter for infeed roller conveyor incl. 1 support roller - tool kit - detailed operating instructions, maintenance manual etc. Hfjdpoxaa Hnjfx Ahajk - Saw blade not included!

Būklė: naudotas, Gamybos metai: 1978, mašinos/transporto priemonės numeris: 4788, Bendra presavimo galia: 35 t Iškyša: 225 mm Stūmoklio eiga: 8 - 80 mm Stūmoklio reguliavimas: 50 mm Įrengimo aukštis (eiga apačioje, reguliavimas viršuje): 325 mm Hfjdpfjw Tukiex Ahask Stalo tvirtinimo paviršius apie: 600 x 450 mm Stūmoklio tvirtinimo paviršius apie: 300 x 225 mm Eigos per minutę: 160 min⁻¹ Galingumo poreikis: 2,2 kW Matmenys IxPxA: 1000 x 1600 x 2200 mm Mašinos svoris apie: 1,9 t

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras plotis: 480 mm, bendras ilgis: 6 000 mm, statybos plotis: 405 mm, statybinis aukštis: 700 mm, ašių atstumas: 100 mm, EasySystem powered roller conveyor in like-new condition, multiple units for sale 480x6000 Powered roller conveyor with aluminium frame, in like-new condition, multiple units available from stock. The track system can be classified. Manufacturer: EasySystem Total track width: 480 mm Roller width: 405 mm Roller diameter: 50 mm Roller pitch: 100 mm Total rail length: 6000 mm Hodpsukgduefx Ahaofk Rail height: 700 mm (adjustable legs – max. 8 cm +/-) Drive: Electric motor with NORD gearbox Power: 0.37 kW, 1.89 A, 230/400 V Conveyor speed: approx. 30 m/min Optionally, a NORD frequency inverter can be purchased to allow stepless speed adjustment.