PRESS STABDYS

Placke QPB-M6 3100/150t

Sąlyga: geras (naudotas), Used radial drilling machine SASS Mod. TRM 2200 Excellent condition, fully operational. Equipped with cube Maximum drilling diameter in solid cast iron: 100 mm (20-22) Maximum drilling diameter in solid steel R=60: 80 mm Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor – rpm: 18 ÷ 1600 Automatic feeds Maximum arm outreach (column edge to spindle axis): 2230 mm Minimum and maximum drilling radius: 660 ÷ 2505 mm Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Rbedpfx Ahjikqz So Het Base dimensions: 2490 x 1230 mm Spindle motor: 11 HP Weight: 9000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, plieno lakšto storis (maks.): 5 mm, Hydraulic swing bending machine Make: HOCHSTRATE Model: 3000/5 Year of manufacture: 1998 Technical specifications Rbodovrxnxspfx Ah Hjt Manufacturer: HOCHSTRATE Model: 3000 x 5 Year: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm²) Motor power: 7.5 kW Space requirements: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment • PLC control • 30 mm bending bar All information subject to change. A demonstration is possible at any time in our showroom.

Gamybos metai: 1991, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 07282, Offer 22336 Technical Data: - Max. working width: 3030 mm - Max. sheet thickness without pre-bending: 4 mm - Max. sheet thickness with pre-bending: 3 mm - 3 driven rollers Redpfxsmdqllo Ah Hebt - Roller diameter top / bottom: 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Required space: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - with pre-bending function - Rear roller adjustable at an angle - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rollers - Forward and reverse operation - Separate control panel

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1991, plieno lakšto storis (maks.): 16 mm, pjovimo ilgis (maks.): 6 000 mm, HIDRAULINĖ ŽIRKLĖS LVD MVSB 62/16 Serijos numeris: 18478 Pagaminimo metai: 06/1991 TECHNINĖS SPECIFIKACIJOS Maks. lakšto storis St45: 16 mm Pjovimo ilgis: 6200 mm Atstumas tarp statramsčių: 6400 mm Pjovimo tarpas: 60 mm Atatramio liniuotės diapazonas: 1000 mm Mažiausias pjovimo kampas: 0,5 ° Didžiausias pjovimo kampas: 2,5 ° Mažiausias pjūvių skaičius per min.: 6 Didžiausias pjūvių skaičius per min.: 25 Mažiausias peilio tarpas: 0,05 mm Didžiausias peilio tarpas: 1,6 mm Variklio galia: 30 kW Apytikslis svoris: 35 000 kg Matmenys (IxPxA): 7100 x 2400 x 3000 mm Komplekte pridedama: - ELGO P85 "GO-TO" užpakaliniam liniuotės valdymui - Elektrinis užpakalinės liniuotės reguliavimas, 1000 mm - 1 priekinė atrama, 2 m, viena su 90° kampine atrama, priekinė atrama L2000 mm - Pedalinis jungiklis - Voleliai ant stalo - Pakreipiama užpakalinė liniuotė su rankine hidrauline pompa Rbodpfoumhm Ajx Ah Hjt

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I Rodefg E Hljpfx Ah Hsbt - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naudotas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Rjdpfx Ajdzqblsh Hebt Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is a double-over edge of sheet metal, created by folding it once over itself to increase its rigidity. Folding produces a rounded edge, reducing the risk of injury from cutting on a sharp sheet metal edge. Ideal for sheet metal processing for sheet metal furniture, cladding panels, or for air duct and silencer construction.

Sąlyga: geras (naudotas), Gamybos metai: 1963, Vertical Turning Lathe Rjdpfevi Hryjx Ah Hobt Manufacturer: JUNGENTHAL, Type: DK 1400, Year: 1963, equipped with 1-axis digital readout. Maximum turning diameter: 1400 mm Faceplate: 1250 mm automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For additional specifications, please refer to the data sheet. Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t In good overall condition.

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Rodpfx Ahed Ev Upj Hobt Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Gamybos metai: 2019, Sąlyga: naujas, Recirculating Curing Oven Gas Oven CGN Oven Powder Coating Oven NEW SGS-800/O Redpfx Ahscw Tzxs Hjbt Gema Optiflex Width: 2500 mm Height: 2500 mm Depth: 12500 mm Directly from the manufacturer. More information at Romer-Germany

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate Rbjdpfecubatox Ah Hst - Safe for manual loading operations - Operating manual available