Dvigubo pasvirimo juostinis pjūklas

PILOUS ARG 260 plus H

Sąlyga: naudotas, Technical details: Welding current: 500 A Bledpfx Adjvz Abhswjd Approximate machine weight: 128 kg Dimensions (L x W x H): 1.2 x 0.8 x 1.2 m Control: Display for welding current with 2-/4-stroke switch, pulse function, stepless adjustment Cooling system: Water-cooled with antifreeze protection Shielding gas: Solenoid valve without pressure regulator Torch package: 4.0 m length Torch head: gas-cooled Ground clamp with 4.7 m ground cable Wire feed: 4-roller drive with wire diameter for 1.0/1.2 mm

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Blsdpfofg E Hljx Adwsd Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, X ašies eiga: 2 050 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 750 mm, įrankių magazino lizdų skaičius: 36, stalo ilgis: 2 200 mm, stalo plotis: 850 mm, valdiklio modelis: OKUMA-OSP-HMI, aušinimo skysčio tiekimas: 15 juosta, atstumas nuo stalo centro iki veleno galo: 950 mm, ašies variklio galia: 22 W, ašies skaičius: 36, greitasis eiga Z ašyje: 16 m/min, greitas poslinkis X ašimi: 16 m/min, greitas poslinkis Y ašis: 16 m/min, veleno nosis: BT 50, veleno greitis (maks.): 10 000 aps./min, veleno greitis (min.): 50 aps./min, stalo apkrova: 2 500 kg, įrankio skersmuo: 120 mm, įrankio ilgis: 400 mm, įrankio svoris: 20 g, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, 3-axis vertical machining center with OKUMA-OSP-HMI CNC Bodpeu Dinkofx Adwsld

Sąlyga: naujas, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm made from various materials such as PE, PP, and PVC. These machines are capable of directly shredding plastic pipes up to 9 metres in length without the need for pre-cutting or sawing. At the core are rotors with diameters up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. The pipe is inserted into a closed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed by the shredder via a conveyor belt to a granulator. The granulator further processes the material into directly re-usable regrind. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, avoidance of power peaks, and minimised risk of accidents during pre-shredding. Bsdpfxeghgd Ij Adwsld

Sąlyga: naudotas, Feed opening: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor diameter: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Bledpfjbq Stqsx Adwsd Screen design: heavy-duty screen basket, reinforced with ribs Screen perforation: 15 mm Counter-knives: with adjustable cutting gap Machine weight: approx. 5,900 kg

Sąlyga: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed Blodpfxslgvkie Adwed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Sąlyga: naudotas, rida: 166 000 km, galia: 96 kW (130,52 AG), pirmoji registracija: 11/2012, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 5, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 3 850 mm, krovinių skyriaus plotis: 2 040 mm, krovos erdvės aukštis: 400 mm, Įranga: ABS, centrinis užraktas,

Gamybos metai: 2018, Sąlyga: naujas, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400 mm ===== 4x lifting eye bolts for suspension Bodpfx Asd Dy S Djdwjld Rubber belt GB30 Magnet dimensions: 1200 x 500 mm

Sąlyga: naudotas, Gamybos metai: 2006, X-axis travel: 1,000 mm Bjdpfjw E Nnnsx Adwjld Y-axis travel: 1,000 mm Z-axis travel: 1,200 mm C-axis: 360° x 0.001° increments A-axis: ° Control: SINUMERIK 840D Powerline SIEMENS Table size: 900 x 700 mm Milling spindle taper: HSK-A100 Spindle speeds - stepless: 12,000 rpm Tool magazine: Chain magazine for 180 tools Total power requirement: 85 kW Machine weight: approx. 20.5 t Space requirement: approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC rotary tilting table Rotoclear window Probe prepared Blum laser tool measurement Vibration sensor Tool taper cleaning 4th operating mode High-pressure coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling / heating unit

Sąlyga: naudotas, Gamybos metai: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Fully Automatic Wet Deburring Machine for Sheet Metal Model EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Serial No. 780063 _____ Grinding width approx. 1,380 mm Roller width: 1,400 mm Max. workpiece height: 1 – 70 mm Continuously variable feed speed: approx. 1.5 – 8 m/min Comprises 5 processing units: Oscillating sanding roller for abrasive cloth or non-woven abrasives Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, for laminated or non-woven abrasive flaps, adjustable for wear. Brush roller unit for two rollers with Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, ideal for removing oxide layers. Wet grinding unit with integrated band filter system and closed Bjdpfet Hw Iiox Adweld water circuit, installed under the conveyor belt and easily retractable from the machine. Washing and drying system, designed for a minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece transport takes place frontally via a continuous conveyor belt (min. part length 350 mm) with vacuum suction system (300 mm width on the right) and a magnetic track with a width of 300 mm, to hold small parts as short as 80 mm. Frequency converter for stepless speed control of the abrasive flap brushes from 250 – 1000 RPM (position 2, top), also for conveyor belt feed. Control panel with clear operation and digital roller position display, 4 ammeters for monitoring roller drives, indicator LEDs. Quick-change mechanism for sideways removal of the abrasive flap brushes plus various spare rollers with non-woven abrasives and brush inserts. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition : good to very good Delivery : ex stock – as inspected Payment : strictly net – after receipt of invoice