Vertikalios tekinimo staklės

Pietro Carnaghi AC 20

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Technical Details Faceplate diameter: 1800 mm Swing diameter: 2000 mm Turning height: 1270 / 1120 mm Bodpfjxwu S Hox Admsdk Control: SIEMENS 840 D Max. workpiece weight: 5000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 - 320 rpm Crossrail adjustment: 400 mm Ram support horizontal travel (X): -2770 / +2275 mm Ram support vertical travel (Z): 1250 mm C-axis: 360° (0.001°) deg Milling drive: 37 kW Spindle speed range (milling): 10 - 3000 rpm Table drive power: 100 kW Torque: 31,784 Nm Feed range (X/Z): 0.1 - 15,000 mm/min Machine weight approx.: 55 t Additional Information Used CNC vertical turning lathe for turning, drilling, and milling operations. The machine was first commissioned in 2011. CNC Control: Siemens Sinumerik 840 D Number of NC axes: 4 (X, Z, C, crossrail adjustment) Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Tool slide stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Spindle speed range: 1.0 - 320 rpm Spindle drive power: 100 kW Drill-mill spindle: 37 kW Crossrail travel: 2 steps of 200 mm each Total electrical connected load: 218 kVA Travels: X-axis: -1650 to +2165 mm Z-axis: 1250 mm Rapid traverse X/Z-axis: 15 m/min Number of tool magazine positions: 80 positions in chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disk magazine with 12 positions for turning toolholders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil mist extraction system 1 pallet with jaw boxes, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning toolholders Special feature: Pallet changer with two stations equipped with one faceplate Ø1800 mm and one six-jaw compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is installed in a pit. Condition description: About six months ago, the cross roller bearing on the Carnaghi was replaced. All Siemens components in the control cabinet were also completely renewed at the end of 2023. In addition, the machine is equipped with a probe for tool measurement and an external Renishaw probe for workpiece measurement. As a special feature, the machine has an additional probe on the Z-axis (Z1 axis). This provides an accuracy and time advantage as the tool does not have to be removed for measurement. However, this is currently deactivated and should be overhauled when recommissioned. Furthermore, the machine features a Rotomors six-jaw compensation chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, veikimo valandos: 98 h, Valdymo blokas Gamintojas: FANUC Modelis: Series-31i Pagrindinė pavara Veleno greičio diapazonas: 10000 Bdodpfxjw Irmdo Admjk Media Drožlių transporteris: Taip Papildoma įranga Alyvos garų surinkėjas Šis 5 ašių FANUC ROBODRILL α-D21LiB5 pagamintas 2018 metais. Puikiai tinka preciziškam apdirbimui, šis vertikalus apdirbimo centras užtikrina patikimą darbą. Pasinaudokite proga įsigyti šį FANUC ROBODRILL α-D21LiB5 vertikalųjį apdirbimo centrą. Dėl daugiau informacijos kreipkitės į mus. Pritaikymo sritys: Frezavimas

Sąlyga: naudotas, Gamybos metai: 2009, Faceplate diameter: 1,800 mm Swing diameter: 2,000 mm Turning height: 1,500 mm Control: SIEMENS 840 D Max. workpiece weight: 5,000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 - 320 rpm Table drive power: 100 kW Torque: 31,784 Nm Total connected load: 218 kW Machine weight approx.: 55 t Turning and drilling heads: - 4 x turning heads + tool holders - 3 x turning heads for Capto system - 1 x driven boring head - 2 x angle drilling heads (manufacturer: Benz) Dimensions: - Turning diameter on faceplate: 2,000 mm - Faceplate diameter: 1,800 mm - Turning height with L100 turning head: 1,500 mm Ram performance: - Clamping force of tool holder or accessory: 120,000 N - Max. feed force axis Z and X: 30,000 N - Spindle drive power for milling, drilling, and grinding: 37 kW - Spindle speeds for turning operations: 10 - 3,000 rpm Bdsdpfevyliljx Admjk Travel paths: - Axis X, horizontal slide on crossbeam: -2,270 / +2,275 mm - Axis Z, vertical slide on crossbeam: 1,250 mm - Axis C, table rotation: 360° Feed rates: - Axis X: 15,000 mm/min - Axis Z: 15,000 mm/min - Axis C: 3.25 rpm Coolant system: - Coolant/filter system: 1,500 l Chain tool magazine with 80 positions: - Max. tool weight: 30 kg - Max. tool diameter with free adjacent positions: 250 mm Disc magazine with 12 positions: - Max. weight of tool holder/accessory units: 150 kg - Max. length of tool holder: 500 mm - Max. magazine load: 1,000 kg Pallet changer with 2 pallets: - Pallet diameter: 1,800 mm - Pallet load capacity (centered): 5,000 kg - Pallet load capacity (off-center): 4,000 kg Equipment / accessories: - 1x pallet with base jaw boxes, diameter 1,800 mm - 1x hydraulic chuck with base jaws, diameter 1,800 mm - Various drilling and milling heads - Various tool holders - 2x touch probes

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 5 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 400 mm, ašies skersmuo: 100 mm, veleno greitis (min.): 10 aps./min, veleno greitis (maks.): 2 500 aps./min, The machine is in good technical condition, currently disconnected. It features a Heidenhain TNC 530i control system, a chip conveyor, and a 40-position tool magazine. Bdodpev Upbnofx Admok

Sąlyga: geras (naudotas), Gamybos metai: 1987, sukimosi skersmuo virš skersinio stumduko: 810 mm, veleno skylė: 130 mm, tekėjimo skersmuo: 1 140 mm, tekėjimo ilgis: 7 500 mm, plunksnos brūkšnys: 300 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 300 mm, bendras aukštis: 1 650 mm, lovos plotis: 600 mm, Bitte beachten Sie: Nicht Originalbilder. Die Maschinenlänge beträgt nur 3000 mm, nicht 5000 mm. 3-fach Führungsbahnausführung 2-Achsen Heidenhain Digitalanzeige Vorschub in 3 Richtungen sämtlicher Oberschlitten Zentrale Schmierung Spannend im Futter tragbar: 2.500 kg Tragkraft ohne Auflage: 8.500 kg Tragkraft mit Stütze: 10.000 kg Optional 4-Backenfutter ca. 1.200 mm Optional 4-Backenfutter ca. 1.500 mm Optionales Paket mit 3 festen Lünetten, Modell von ... bis ... Drehlänge: 5.000 / 7.500 mm Drehdurchmesser über Bett: Ø 1.140 mm Drehdurchmesser über Schlitten: 810 mm Drehdurchmesser über Grube: Ø 1.500 mm Grubenlänge: 2.500 mm Spindelbohrung: 130 mm Bettbreite: 600 mm Reitstockpinolen-Ø: 130 mm Bdedpfx Ajv S Dp Ijdmok Pinolenhub: 300 mm Spindelaufnahme: 6 MK Leistung: 25 kW Drehzahl: 9 – 900 U/min Länge: 7.500 mm Breite: 2.300 mm Höhe: 1.650 mm Gewicht: 12.000 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 9 000 mm, Y ašies eiga: 4 000 mm, Z ašies eigos atstumas: 1 000 mm, FREZAVIMO / GRĘŽIMO STAKLĖS SU JUDANČIA KOLONA CME TECHNINĖS CHARAKTERISTIKOS CME – GALIMA APŽIŪRĖTI VEIKIANČIĄ Gamintojas: CME Modelis: MB 9000 Metai: 2007 CNC: Siemens Sinumerik 840D X ašis: 9000 mm Y ašis (vertikali): 4000 mm Z ašis: 1000 mm W ašis (Ø 150 mm): 700 mm 2 rotaciniai-slankiojantys stalai (linijinis judesys: 2000 mm) 2500 x 2500, talpa 25 t Heidenhain optinės liniuotės visose ašyse Bdodpfxeu R Rk Hs Admok Tiesioginė galvutė Įrankių keitiklis 90 pozicijų ZF rėžio keitimas Vidinis aušinimas Drožlių ištraukėjai

Gamybos metai: 1989, Sąlyga: labai geros būklės (naudotas),

Sąlyga: naujas, Typ R-RP1300 Bdsdpfx Adsdflqajmsk Arbeitsbreite: 1300 mm Mindestarbeitlänge: 500 mm Arbeitshöhe/-dicke: 3–200 mm Vorschubgeschwindigkeit: 0–30 m/min Gesamtmotorleistung: 30,37 kW Motorleistung erstes Aggregat: 15 kW Motorleistung zweites Aggregat: 11 kW Bürstenmotor zur Staubreinigung: 0,37 kW Vorschubmotor: 4 kW Hubmotor: 0,37 kW Durchmesser erster Walze: 240 mm Durchmesser zweiter Walze: 210 mm Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,6 MPa Absaugleistung: 9.600 m³/h Transportabmessungen (LxBxH): 2.700 x 2.100 x 2.400 mm Gewicht: 3.300 kg

Sąlyga: naudotas, Gamybos metai: 1998, Spaudimas 175 t Lenkimo ilgis 4050 mm Statramių atstumas 3050 mm Iškyša 300 mm Eiga 240 mm Eigos greitis – žemyn be apkrovos maks. 140 mm/sek Darbo greitis maks. 9 mm/sek Eigos greitis – grįžimas maks. 130 mm/sek Atstumas tarp stalo ir slankiklio min. 370 – maks. 610 mm Valdymas CYBELEC DNC 880S Bendra galingumo paklausa 15 kW Staklių svoris apie 15 t Užimama vieta apie 5,89 x 3,6 x 3,16 m Įranga: - valdomos ašys: Y1, Y2, X, R - CNC bombiravimas - CYBELEC DNC 880S valdymas – pasukamas valdymo pultas, priekyje dešinėje - 4 rankiniu būdu reguliuojamos atraminės pirštos - Kojinis jungiklis - 1 viršutinio įrankio rinkinys - 1 apatinio įrankio rinkinys - 2 priekinės medžiagos atramos - Šoninė ir galinė apsauga Bdodpfx Adetv Rh Ajmok - Naudojimo instrukcija

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), An angular unit for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, slot spindle length: 640 mm, profiling and feed-synchro length: 285 mm – 320 mm, control: Siemens WS400. Includes complete tooling set and sash window components. Documentation available. Bedpjtq U A Ijfx Admodk