Denford Cnc pirkti naudotą (8 771)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
mažas skelbimas

104 km
Plazminio pjovimo staklės
CNC
Skambinti
Sąlyga: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Parduodama CNC plazminio pjovimo staklės – kaminukų ir ventiliacijos gamybai.
Būklė: naudotos, techniškai tvarkingos, prijungtos – galima pamatyti ir išbandyti vietoje.
Įranga skirta vamzdžių, kaminukų ir ventiliacijos elementų gamybai iš skardos bei lengvų metalų.
Techniniai parametrai:
Gamybos metai: 2007
Pjaunamų vamzdžių diametras: nuo Ø60 mm iki Ø600 mm
Gaminio ilgis (maks.): 1500 mm
Skardos storis (oficialiai): 0,5 – 1 mm
Faktiškai išbandyta: pjauta iki 3 mm sienelės storio (priklausomai nuo plazmos galios ir metalo rūšies)
Plazmos šaltiniai: 2 vnt. – 60A ir 80A
Plazmos galia: 60 A / 80 A (pagal pasirinktą šaltinį)
Savybės ir įranga:
Pilnai programuojamos CNC valdomos staklės
Galimybė generuoti pjovimo kontūrus pagal modelį ar šabloną
Tiksli automatinė pozicionavimo ir sukimo sistema
Prisitaikanti prie skirtingų diametrų vamzdžių
Integruota plazmos pjovimo valdymo sistema su reguliuojama galia
Komplektuojama su dviem plazmos šaltiniais (60A ir 80A) – pagal gaminio poreikius
Paskirtis:
Įranga pritaikyta ventiliacijos sistemų, kaminukų, ortakių ir įvairių vamzdinių konstrukcijų gamybai.
Tinka tiek plonam skardos pjovimui (0,5–1 mm), tiek storesnių sienelių (iki 3 mm) apdirbimui.
Naudojama CNC technologija leidžia pasiekti aukštą pjovimo tikslumą ir pakartojamumą, mažinant rankinio darbo poreikį.
Knedexlp Sqjpfx Acuoc
Jei turėsite daugiau klausimų – mielai atsakysime.
mažas skelbimas

189 km
Mechaninio apdirbimo centras
Blue Elephant CNCELECNC1325 CNC
Skambinti
Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, valdiklio modelis: DSP A11 control system, ruošinio ilgis (maks.): 2 500 mm, ruošinio plotis (maks.): 1 300 mm, ruošinio aukštis (maks.): 200 mm, ašies variklio galia: 4 500 W, įvesties srovės tipas: trifazis, Pagrindinės specifikacijos:
# Darbinis dydis: 1300 x 2500 x 200 mm
# 4,5 kW HQD oro aušinimo freza, 18 000 aps./min., ER32 griebtuvas
# 5,5 kW Fuling dažnio keitiklis
# DSP A11 valdymo sistema
Knodswnimcjpfx Acuec
# Žingsniniai varikliai ir jų tvarkyklės
# Taivano kvadratiniai kreipiančiosios bėgiai, #20
# T-spalvos ir vakuuminis darbinis stalas
# 7,5 kW oro aušinimo vakuuminis siurblys
# 3 kW dvigubų maišų dulkių surinkėjas
# Sustiprinta staklių konstrukcija
# Įtampa: 380 V, 3 fazės, 50 Hz
# Automatinė tepimo sistema
# Automatinis įrankio jutiklis
# Mėlyna-balta spalva
mažas skelbimas

659 km
Plazminis pjaustytuvas MTX 1530 Ventiliuojamas
Martex CncMTX 1530
Skambinti
Gamybos metai: 2023, Sąlyga: naujas, PLASMA CUTTER PLOTTER MTX 1530 Ventilated
Construction: steel + aluminium
Working area: 3000/1500/200 mm
XY-axis drive: dual-side gantry drive, 4Nm stepper motors with gearboxes, rack and pinion
Z-axis drive: stepper motor with ball screw
Travel speed: up to 25 m/min
Z-axis control system: THC by My Plasm System
Linear guides: Hiwin
Cable chain: IGUS
Automatic material detection system
Power supply: 240V
Permissible load: 1800kg
Net weight: 800kg
USB port for opening projects and file transfers via external flash drives
Sheet metal detection system
THC height control system
Hiwin linear guides
Dual-side gantry drive:
X axis: stepper motor and rack and pinion
Y axis: stepper motor and rack and pinion
Z axis: stepper motor and ball screw
Drives based on Hiwin rails
Ventilated table adapted for fume extraction
INCLUDED:
- Ventilated table
- Control software in Polish
- CE declaration of conformity
- Technical documentation (DTR)
- Warranty
- Start-up and training included
The latest control system available in our plotters:
Integrated THC height regulator
Anti-dive torch function
Accepted file types: DXF, PLT (HPGL), G-code (.tap)
Integrated CAM module: MyMini CAM
Automatic internal and external object recognition
Path preview analysis
Cutting parameter database
Project angle correction to material
Possible to start cutting from any point
End cutting from any position
Import DXF, PLT
Automatic offset, lead-in and lead-out generation
Can be used with external CAM software
Separate speed for piercings
Parameter database
Kedsnfvlgepfx Acuenc
Project angle correction to material orientation
Soft and hard limits
THC anti-dive functions
Gamepad control supported
Material detection by touch probe or floating head
WHY CHOOSE US
WE ARE A POLISH MANUFACTURER OF PLASMA CUTTING MACHINES
CLOSE PARTNERSHIP WITH PROMA-ELEKTRONIKA (THC MANUFACTURER)
PROFESSIONAL GUIDES BY RENOWNED HIWIN BRAND – VERY LONG LIFESPAN AND SUPERIOR CUT QUALITY REQUIRING NO FURTHER PROCESSING
COMPONENTS SUCH AS GEARBOXES, MOUNTS, HOLDERS, ETC. ARE CNC-MACHINED TO ENSURE HIGH QUALITY AND REPEATABILITY
OUR STRENGTHS
HIGH-QUALITY SHIELDED CABLES
INDUCTIVE SENSORS ON ALL AXES – DUST PROOF, JAM-PROOF
ADVANCED THC MY PLASM FOR SMOOTH TORCH OPERATION
CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) INSTALLED IN CUTTERS
WE INSTALL CUSTOMER-SUPPLIED OR CLIENT-RECOMMENDED CUTTERS
WE PROVIDE LEASING ASSISTANCE
Possibility to select an appropriate cutter to individual company needs.
Other table sizes available on request.
mažas skelbimas

408 km
CNC vamzdžių nuslydimo staklės
SMS MEER CNCRFA 14
Skambinti
Gamybos metai: 2000, Sąlyga: labai geros būklės (naudotas), SMS MEER CNC-Doppelseitige Anfasmaschine
Hersteller: SMS MEER
Typ: RFA 14
Baujahr: 2000
Ksdpfxsghrgus Acuonc
Arbeitsbereich: Rohrdurchmesser Ø 21,3 – 114,3 mm
Wandstärke: 2,3 – 11 mm
Länge: 6–12 m
Die Anlage besteht aus zwei RFA14-Anfasmaschinen mit Transportvorrichtungen zwischen den Maschinen.
Die Aufgabe der Maschinen ist das Innen- und Außen-Anfasen beider Rohrenden.
Das Rohrbearbeitungsspektrum umfasst einen Durchmesserbereich von 21,3 bis 114,3 mm und eine Wandstärke von 2,3 bis 11 mm bei einer Rohrlänge von 6 bis 12 m.
Die Fördertechnik im Bereich der Anfasmaschinen dient dazu, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu transportieren.
mažas skelbimas

520 km
Plazminis pjaustytuvas
Polska Grupa CNCPC2060
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, This is a modern CNC plasma cutter designed for industrial applications, used for cutting sheet metal and profiles with a plasma torch. It features a robust construction made from the highest quality steel and aluminum, a large cutting area, the ability to cut elements of any shape, and low process execution costs.
Material cutting is performed in a short time while maintaining high precision of detail reproduction. To obtain the desired shape, simply import a file into the software, making operation of this cutter easy and intuitive.
Our plasma cutters are primarily intended for processing the following materials:
- Mild steel
- Stainless steel
CONSTRUCTION
The plasma cutter frame is designed and manufactured from scratch in our factory. The high-quality steel used in machine production is cut, welded, and then subjected to precise machining. The entire frame, gantry, and gantry arms are additionally reinforced with ribs to provide high rigidity and eliminate vibrations and deformations.
DRIVES
Our cutters are equipped with high-resolution, high-power Servo AC motors, which ensure proper acceleration and speed in all directions. These are very dynamic and precise motors with feedback control, guaranteeing no deviation by continuously monitoring operating parameters. Classical and proven helical racks are used on the X and Y axes, providing high durability and precision.
TORCH
Our plasma machines are fitted with components from the leading manufacturer PGCNC. The technologies applied in the torch significantly increase productivity and cutting speed. HD technology ensures improved hole quality, greater piercing capability, and bevel cutting options. This guarantees high quality, repeatable cuts and maximizes productivity with minimal operating costs and maximum reliability.
SLATTED TABLE
The slatted table is manufactured using technology that is resistant to high-temperature operation. This allows for continuous work without the risk of burn-throughs that would prevent even material placement on the worktable. The arrangement of the slats can be easily adjusted depending on the size of the cut parts. The slatted table is an excellent solution for cutting thicker materials.
SOFTWARE
The machine comes equipped with Starfire 2D CAD/CAM software. Users have access to various functions, including the ability to import ready-made vector designs in formats such as .dxf, .plt, .ai, and .eps. The program ensures fast and precise generation of cutting paths.
POWER SOURCE
The machine's standard equipment includes a 120A power source, distinguished by high performance, cutting quality, and speed.
AUTOMATIC LUBRICATION SYSTEM
The plasma cutter is also equipped with an automatic lubrication system, minimizing the need for maintenance. The central lubrication system is a simple and functional device designed to deliver oil to points where machine components are in contact with one another.
Knodpfx Aeur R Erocuec
mažas skelbimas

767 km
CNC revolverinė galvutė
CNC revolverová hlava K35.0120.2201.01,K35.0120.2201.01, TE 120, 12 pozic
Skambinti
Sąlyga: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: K35.0120.2201.01, TE 120, 12 pozi, CNC revolverinė galva K35.0120.2201.01, TE 120, 12 pozicijų. Pilnas laikiklių komplektas ir laikiklių gamybos brėžiniai. Būklė kaip nuotraukose. Veikianti – nuimta nuo iki paskutinės akimirkos gaminęsi mašinos. Galima apžiūra vietoje. Pagaminimo metai 2017 – 4 metus sandėliuota.
Knedpfx Ajxndmzjcusc
mažas skelbimas

540 km
Apdirbimo centras
CNC FelderProfit H20
Skambinti
Sąlyga: naudotas, Gamybos metai: 2011, Parduodamas CNC apdirbimo centras profit H20 Format-4 Felder - 2011 m.
Įrenginys nuolat eksploatuojamas, šiuo metu galima apžiūrėti darbinių sąlygų metu!
3 ašių centras su paruošimu 4-ai ašiai.
Apdirbimo laukas 1250x3150 mm, Z ašies aukštis 100 mm, galimybė dirbti dviejuose darbo laukuose.
Kedpfxexg Ehdo Acuonc
2024 m. buvo regeneruotas elektros frezos velenas.
Visi remontai ir techninė priežiūra atlikti kvalifikuoto serviso.
Suteikiame pakrovimą.
Transportas pirkėjo sąskaita – sunkvežimio kėbulo ilgis 7–8 m.
Reikalavimai prijungimui:
– Elektrinis kabelis 5x4mm2 su kištuku, tinkančiu dirbtuvėse esantiems lizdams
– Elektrinė apsauga (ne mažiau) 32A pramoninė, pritaikyta variklių galiai. Bendroji taisyklė: vardinė srovė nurodyta ant įrenginio lentelės +40%
– Pneumatinė jungtis su min. 12 mm vidiniu diametru
– Kompresorius, kurio našumas ne mažesnis kaip 100 l/min
– Drožlių nutraukimo sistema
Išrašome PVM sąskaitą faktūrą.
Nurodyta kaina – be PVM.
Dėl papildomos informacijos prašome susisiekti telefonu arba el. paštu.
mažas skelbimas

504 km
HOLEX SK40 ER32 100mm spaudimo laikiklis • CNC grąžtų ir frezų įvorė
Oprawka zaciskowa HOLEX SK40 ER32 100mm • Tuleja do wierteł i frezów CNCOprawka zaciskowa HOLEX SK40 ER32 100mm • Tuleja do wierteł i frezów CNC
Skambinti
Sąlyga: labai geros būklės (naudotas), Parduodama profesionali garsių prekių ženklų HOLEX tvirtinimo galvutė – tvirta ir patikima išeitis CNC apdirbimo centrams. • Tipas: SK40-2/20-100 • Tvirtinimo sistema: ER32 (keičiamieji įvorės) • Ilgis: 100 mm • Maksimalus sukimo momentas: 170 Nm • Sukimosi greitis: iki 12 000 aps./min • Aukšta gamybos kokybė – tikslus kotinių įrankių tvirtinimas • Būklė: naudota, labai geros techninės būklės. Idealiai tinkama grąžtų, frezų, sriegiklių ir kitų kotinių įrankių tvirtinimui. HOLEX ženklas priklauso vokiečių Hoffmann Group – tai kokybės ir ilgaamžiškumo garantija už prieinamą kainą.
Knodpfxsw S Iw He Acuec
mažas skelbimas

659 km
Plazminis pjaustytuvas PROMAX 2040
Martex CncPROMAX 2040
Skambinti
Gamybos metai: 2023, Sąlyga: naujas, CNC Plasma Cutting Machine ProMax Professional Series
TECHNICAL SPECIFICATIONS
Working width: 2000 mm
Working length: 4000 mm
8-section ventilated table
Travel speed up to 50 m/min
KEY EQUIPMENT
DELTA servo drives
X-axis gantry support with dual linear guides
Quick START – machine ready for cutting in under 1 minute
Planetary gearboxes
Helical racks, class 6
Touchscreen monitor with industrial-grade computer
Remote control
Sectional extraction table with pneumatic actuators
CS anti-collision system – protects the torch from collisions
CLS central lubrication system
Double Y-axis referencing
Kodpjnfvlvjfx Acuonc
Laser pointer for torch position indication
SC safety system
Other table dimensions available on request.
mažas skelbimas

1 199 km
Cilindrinė šlifavimo mašina
ROBBI Omicron 3606 (CNC + konv.),Schleif-Ø 300-800mm, Schleifen bis 15m
Skambinti
Sąlyga: naujas, Experience unmatched precision and performance with ROBBI cylindrical grinding machines. Our machines offer grinding lengths starting from 600mm and are available in both semi-automatic and CNC variants. With grinding diameters ranging from 300 to 1000mm, you have limitless possibilities. The ROBBI Omicron 3606 is in stock!
Discover our extensive range of special accessories that make your cylindrical grinder even more versatile. Whether for complex components or demanding tasks, our machines always deliver optimal results.
Rely on ROBBI’s decades of expertise and let us work together to optimize your machining processes. Invest in quality and precision—contact us today! Our range includes conventional or CNC-controlled machines with grinding lengths up to 2m (other models available on request):
TECHNICAL MAIN DATA: Model Omicron CNC 60 or semi-automatic series
Grinding diameter: 595/695 mm
Grinding length: 1000 – 3000 mm
Max. workpiece weight between centers: 1200 kg
TECHNICAL MAIN DATA: Model Omicron CNC 36/32 or semi-automatic series
Grinding diameter: 320 / 355 / 455 mm
Grinding length: 630 – 2030 mm
Max. workpiece weight: 120 (250/300 opt.) kg
CONVENTIONAL MACHINES:
TECHNICAL MAIN DATA: Model Omicron E Series
Grinding diameter: 360 – 430 mm
Grinding length: 630 – 1530 mm
Workpiece weight between centers: 200 – 300 kg
ACCESSORIES (EXAMPLE FOR OMICRON CNC 60):
• CNC control: Siemens 840D
• Glass scales: on the X-axis
• Coolant system: with coolant tray
• Wheel dresser: mounted on tailstock (without diamond)
• Telescopic cover: for the table, made of fabric
Knodpjgay T Defx Acuoc
• Machine oil: 5l for the spindle
• Frequency inverter: for stepless adjustment of spindle and workpiece drives
• Hydraulic unit: for tailstock quill control
• Ball screw drives: in axes X and Z
Optimized cycle with geometric and work parameters:
- The CNC grinding machines fully meet the demands for medium-sized workpiece production.
- The grinders are fitted with the latest generation SIEMENS 840Di sl control system.
- The machine can be equipped with automatic measuring systems.
- The grinding wheel can be adapted for geometries tailored to specific production requirements.
- High-precision machining is possible when the grinder is fitted with a third interpolated axis and specially developed software.
EASY PROGRAMMING
Complex programs can be created without knowledge of ISO programming. Input of parameters is facilitated by a series of prompts and symbols that explain the significance of each parameter step by step.
Programming of work cycles is accomplished by entering the respective cycle parameters. The sequence of the various cycle steps can be changed quickly and intuitively.
Additionally, apart from value-priced new machines and certified used equipment, we offer you even more:
• On-site consultation and solution development
• Organization of transport to your facility
• Installation, commissioning, and handover ready for operation, and much more.
mažas skelbimas

520 km
Frezavimo ploteris 3060ATC 5X
Polska Grupa CNC3060ATC 5X
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, The ATC plotter series has been designed for professional use in large industrial plants and factories, serving the production of complex large-format components. Thanks to its special construction, the machine is adapted for manufacturing, among other things, foundry models and yachts, significantly reducing processing time. To meet the requirements of heavy-duty machining, ATC machines feature additionally reinforced frames and more powerful AC servo drives on each axis. The presence of five axes supports the processing of even the most demanding components.
Plotters in this series are standardly equipped with automatic tool changers, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required.
Materials that can be machined:
- Wood
- Wood-based materials (chipboard, MDF, OSB, etc.)
- Plastics
- Composites
Kjdpfx Ajiq U Tqjcuenc
- PVC
- Non-ferrous metals (aluminum, brass, copper, etc.)
CONSTRUCTION:
The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads related to the machining process.
WORKING AREA:
The usable working area of our machine is 3000 x 6000 [mm].
Z-AXIS RANGE AND GANTRY CLEARANCE:
Parameters can be tailored to individual customer requirements.
DRIVES:
Our machines are driven by SERVO motors, ensuring proper acceleration and speed in every direction. The X and Y axes use classic, proven helical racks for durability and precision, while the Z axis is powered by a high-quality ball screw. All axes run on linear rail guides.
SPINDLE:
A high-class, powerful brushless spindle drives the cutting tool. Spindle speed ranges from 6,000 to 24,000 rpm. A frequency inverter with greater power than the spindle is used for power supply, protecting against speed drops under heavy load.
TOOL MAGAZINE:
Standard equipment includes a linear tool magazine with six HSK holders. Additional tool magazine positions are available as an option.
SOFTWARE:
The machine is supplied with dedicated CAD/CAM software, enabling fast and easy design of parts, which the program then converts into G-code. Import of ready-made files from other programs is also possible.
CONTROL SYSTEM:
Operation is managed via a controller equipped with its own processor and operational memory, ensuring stable and reliable performance.
mažas skelbimas

1 220 km
Universalus apdirbimo centras
CNC Fräsmaschine DECKEL MAHODMU 80 T
Skambinti
Sąlyga: reikia remonto (naudotas), Gamybos metai: 1995, veikimo valandos: 18 000 h, Funkcionalumas: ribota funkcionalumas, X ašies eiga: 880 mm, Y ašies eiga: 630 mm, Z ašies eigos atstumas: 630 mm, Įranga: drožlių transporteris, For sale is a DECKEL MAHO DMU 80 T, a robust and precise 3-axis machining center with a large clamping area.
The machine is still connected to power and fully functional – a test run can be arranged by appointment. However, an overhaul of the axes is required.
On-site loading can be organized.
Technical data:
Travel (X/Y/Z): 880 / 630 / 630 mm
Table clamping area: 1250 x 700 mm
Table load: 600 / 500 kg
Spindle taper: SK 40 (DIN 69871)
Speed range: stepless 20 – 12,000 rpm
Control: HEIDENHAIN TNC 426/430
Feed rate X/Y/Z: stepless 20 – 15,000 mm/min
Rapid traverse: 30 m/min
Knjdpsxphdgofx Acuec
Tool changer: 25 positions
Tool data: Ø 80 / 130 mm | Max. length 315 mm | Max. weight 8 kg
Total power requirement: 60 kW
Machine weight: approx. 9.6 t
Dimensions (L x W x H): 4.53 x 2.60 x 2.50 m
Accessories
- Electronic hand control panel
- Chip conveyor (screw conveyor)
- Coolant system
✅ Your benefits at a glance:
- Immediately operational – machine is connected and can be tested
- Solid 3-axis machining center
- High spindle speeds & feed rates for efficient machining
- On-site loading possible
- Attractive price-performance ratio
Location: 69181 Leimen
Fixed price: €10,000
If you are interested or want to arrange a viewing/test run, just get in touch!
mažas skelbimas

504 km
HOLEX SK40 Ø16 spaudimo laikiklis – ER įvorėms, CNC, 12 000–15 000 aps./min.
Oprawka zaciskowa HOLEX SK40 Ø16 – do tulejek ER, CNC, 12.000–15.000 obr/minOprawka zaciskowa HOLEX SK40 Ø16 – do tulejek ER, CNC, 12.000–15.000 obr/min
Skambinti
Sąlyga: labai geros būklės (naudotas), HOLEX SK40 įvorinis laikiklis ER tvirtinimo įvorėms – solidi konstrukcija, idealiai tinka darbui CNC apdirbimo centruose. • Tipas SK40 – DIN 69871 • ER tvirtinimo įvorė (skersmuo Ø16 mm) • Laikiklio ilgiai: 70 mm, 100 mm, 110 mm (priklausomai nuo modelio) • Maks. sūkių skaičius 12 000–15 000 1/min • Sukimo momentas iki 70 Nm • Subalansavimo klasė G6.3 – stabilus darbas dideliu greičiu • Prekės ženklas HOLEX – Hahn+Kolb Vokietija • Labai gera būklė, sandėlinė • Galima pirkti pavienes arba didesnį komplektą.
Kjdpfx Acjw S Itbjuenc
mažas skelbimas

659 km
Plazminio pjovimo staklės
MARTEX CNCMTX 1530
Skambinti
Sąlyga: naujas, Gamybos metai: 2024,
mažas skelbimas

520 km
Lazerinis pjaustytuvas
Polska Grupa CNCFC1530 z bocznym załadunkiem
Skambinti
Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, FIBER CUT laser cutting machines represent a revolutionary solution! Innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These machines are characterized by high cutting speeds, superior efficiency, and exceptional precision. They ensure unmatched accuracy and repeatability.
Our fiber lasers are primarily designed for processing materials such as:
- Non-ferrous metals
- Aluminium
- Stainless steel
- Carbon steel
CONSTRUCTION
The frame of our laser is designed and manufactured in-house at our facility. The high-quality steel used in production is cut, welded, and then subjected to precision machining. The entire frame, gantry, and gantry arms are reinforced with additional ribbing to ensure high rigidity and eliminate vibrations and deformations.
LASER SOURCE
The machine utilizes a Raycus Laser light source with high electro-optical conversion efficiency, low energy consumption, and superior beam quality. This not only allows for faster and more effective operation, but also helps prevent operator errors. Furthermore, the laser source is resistant to backreflection effects (the return of the beam to the laser). Stable power output guarantees efficient operation with low energy consumption.
AUTOMATIC LUBRICATION SYSTEM
To maintain the machine in optimal condition, the racks and linear guides must be lubricated with oil at least every few days. The automatic system triggers lubrication at specified intervals and in the correct quantity; all parameters are set within the software.
Kedpfx Ajuruyaecusnc
- Working area: 1500 x 3000 mm
- Cutting head: NC30E
- CYPCUT 2000E control system
- Japanese SMG linear guideways
- LEADRACK drive system
- LEADSHINE BUS XY 750W servomotors
- Shimpo reducer
- Raycus 3kW laser source (CE)
- Extraction fan, provided as standard with computer
mažas skelbimas

504 km
GARANT SK40-16-100 • CNC laikiklis Hoffmann •
GARANT SK40-16-100 • Oprawka CNC Hoffmann •GARANT SK40-16-100 • Oprawka CNC Hoffmann •
Skambinti
Sąlyga: labai geros būklės (naudotas), Parduodama CNC įrankio laikiklis GARANT (Hoffmann Group) – modelis SK40-16-100. Aukštos klasės tvirtinimas frezavimo staklėms ir apdirbimo centrams, puikiai tinkantis preciziškam metalo apdirbimui. • SK40 kūgis – pramoninis standartas • Tvirtinimo Ø16 mm • Ilgis 100 mm • Subalansavimas G2.5 – iki 25 000 aps./min • Maks. priveržimo momentas 50 Nm • Premium prekės ženklas – GARANT (Hoffmann Group) • Labai gera būklė, naudotas, veikiantis – komplektuojamas su frezomis/grąžtais.
Knjdpfxjw Sy Epe Acuoc
-- NURODYTA KAINA UŽ 1 VNT --
mažas skelbimas

659 km
CNC degiklis 1530 PRIEINAMAS RANKOMIS
MARTEX CNCMTX 1530
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, PLASMA CUTTING MACHINE MODEL MTX 1500/3000
Construction: Steel + aluminium
Overall dimensions: 3350/2200/1300
Working area: 3100/1520/140
XY axis drive: Dual-sided gantry drive with 4Nm stepper motors and gear reductions, rack and pinion accuracy class 8
Z axis drive: Stepper motor with ball screw
Travel speed: up to 25 m/min
Z-axis control system: THC MyPlasm system
Collision system: torch protection system
Linear guides: Hiwin
Automatic material detection system
Power supply: 240V
Permissible load: 1700 kg
Net weight: 1000 kg
INCLUDED:
- Control panel
- Water table
- Replaceable grate
Knedpfx Acsnfvmdouoc
- Control software in German, English, and Polish
- CE declaration of conformity
- Technical documentation (DTR)
- Warranty
Possibility to select an appropriate Hypertherm plasma source tailored to the individual needs of the company.
mažas skelbimas

520 km
Frezavimo ploteris 2030 ATC 4 ašių
Polska Grupa CNC2030 ATC 4 osie
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, CNC Milling Router 2030 ATC
4 axes, tilting spindle +/- 90 degrees
Working area: 2100 x 3000 mm
The ATC router series is designed for professional applications in large industrial facilities and factories. These machines are intended for machining a wide range of materials. To meet the demands of heavy-duty processing, the ATC machines are equipped with an additionally reinforced frame and more powerful AC servo drives on each axis.
A vacuum table is standard equipment on these machines. It is also possible to install a hybrid table.
Routers in this series are equipped as standard with automatic tool change, a six-position linear tool magazine, and a tool height sensor. These solutions significantly speed up machining processes that require the use of multiple cutters.
Materials processed:
- Wood
- Wood-based materials (chipboard, MDF, OSB, etc.)
- Plastics
- Composites
- PVC
- Non-ferrous metals (aluminum, brass, copper, etc.)
CONSTRUCTION:
Kjdpfx Aeirfavocuenc
The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads associated with machining processes.
WORKING AREA:
The usable area of our CNC is 2100 x 3000 mm.
MATERIAL FIXING:
The machine is equipped with a vacuum table. Optionally, a hybrid or T-slot table can be installed.
Z-AXIS RANGE AND GANTRY CLEARANCE:
Standard Z-axis travel is 300 mm (option to increase available).
DRIVES:
Our CNC machines use SERVO motors, ensuring adequate acceleration and speed in all directions. The X and Y axes utilize proven helical racks, delivering both long lifespan and precision, while the Z axis is driven by a high-quality ball screw. All axes move on linear rail guides.
SPINDLE:
The cutting tool is powered by a high-performance, water-cooled, durable brushless spindle. The spindle utilizes high-quality machine bearings for exceptionally quiet operation and above-average durability. Spindle speed ranges from 6,000 to 24,000 rpm. Power is supplied by an inverter with a higher power rating than the spindle, preventing speed drops during heavy-load operation.
TOOL MAGAZINE:
Standard equipment includes a linear tool magazine with 6 ISO30 tool holders.
SOFTWARE:
The machine comes with the latest version of CAD/CAM software. The software allows fast and easy design of components, which are then converted into G-code. It is also possible to import ready-made files from other software.
CONTROL:
Control is via a controller with its own processor and operational memory, ensuring stable and reliable operation. The controller offers active vector analysis for smooth machine movement and minimal processing errors. The controller features a resume function after power loss, eliminating the need to restart the program. Internal memory allows the machine to operate without reloading the program each time.
mažas skelbimas

504 km
Įrankių laikikliai GARANT SK40-6-100 • CNC
Oprawki narzędziowe GARANT SK40-6-100 • CNCOprawki narzędziowe GARANT SK40-6-100 • CNC
Skambinti
Sąlyga: labai geros būklės (naudotas), Profesionalūs laikikliai iš žinomo prekės ženklo GARANT (Hoffmann Group). Modelis 300230 6 SK40-6-100 – spaudimo skersmuo Ø6 mm, ilgis 100 mm. • SK40 kūgis – CNC standartas • Spaudimo skersmuo Ø6 mm • Laikiklio ilgis 100 mm • Maksimalus apsisukimų skaičius 25 000 aps./min • Aukšta tikslumo ir tvirtumo lygis • Naudotas, veikiantis, paruoštas naudoti. -- NURODYTA KAINA UŽ 1 VNT --
Kjdow Sy D Eepfx Acuenc
mažas skelbimas

659 km
Plazminis pjaustytuvas MTX 2030
Martex CncMTX 2030
Skambinti
Gamybos metai: 2023, Sąlyga: naujas, PLASMA CUTTING PLOTTER MODEL MTX 2030
Construction: Steel + aluminium
Working area: 3000 x 2000 x 200 mm
XY axis drive: Dual-sided gantry drive with 4Nm stepper motors and gear racks
Z axis drive: Stepper motor with ball screw
Travel speed: up to 25 m/min
Z-axis control: THC My Plasm system
Linear guides: HIWIN
Cable carriers: IGUS
Automatic material detection system
Power supply: 240V
Max. load capacity: 2000 kg
Net weight: 800 kg
USB port for opening projects and transferring files via external flash drives
Sheet metal detection system
THC height control system
Hiwin linear guides
Dual-sided gantry drive:
X axis: Stepper motor and gear rack
Y axis: Stepper motor and gear rack
Z axis: Stepper motor and ball screw
Drives implemented using Hiwin rails
Table equipped with a water slat bed—(water table provides cleaner cuts, material cooling, and reduces gas emission during processing)
INCLUDED:
- Water table
- Replaceable slat grate
- Control software in Polish
- CE Declaration of Conformity
- Technical Documentation (DTR)
- Warranty
- Commissioning and operator training included
Latest control system available in our plotters:
- Integrated THC height controller
- Torch anti-dive function
- Supported file types: DXF, PLT (HPGL), G-Code (.tap)
- Integrated CAM module: MyMini CAM
- Automatic internal/external object recognition
- Toolpath pre-analysis
- Cutting parameter database
- Project angle correction to material
- Ability to start cut from any point
- Cut from the end option
- DXF, PLT file import
- Automatic generation of toolpaths with offset, entry and exit moves
- Compatible with external CAM programs
- Separate speed setting for holes
- Parameter database
- Project-to-material angle adjustment
- Software and hardware limits
- THC anti-dive functions
- Possible control via game pad
- Material detection via touch-sensing floating head system
Ksdpfx Asnfu Tlocuenc
WHY CHOOSE US?
WE ARE A POLISH MANUFACTURER OF PLASMA CUTTING MACHINES
CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER)
PROFESSIONAL HIWIN GUIDES RENOWNED FOR LONG LIFESPAN, HIGH CUT QUALITY REQUIRING NO FURTHER FINISHING
COMPONENTS SUCH AS GEAR RATIOS, MOUNTS, HOLDERS ETC. MANUFACTURED IN-HOUSE WITH CNC TECHNOLOGY FOR HIGH QUALITY AND REPEATABILITY
OUR ADVANTAGES:
- HIGH-QUALITY SHIELDED CABLES
- INDUCTIVE SENSORS ON ALL AXES—RESISTANT TO DUST AND JAMMING
- ADVANCED THC MY PLASM—SMOOTH TORCH OPERATION
- CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) INSTALLED IN CUTTERS
- WE INSTALL PLASMA TORCHES PROVIDED BY THE CUSTOMER OR SUPPLY TORCHES AS REQUIRED
- ASSISTANCE WITH LEASING ARRANGEMENTS
- OPTIONS TO MATCH THE PLASMA CUTTER TO THE INDIVIDUAL NEEDS OF YOUR BUSINESS
Other table sizes available upon request.
mažas skelbimas

520 km
Plazminis pjaustytuvas PC1530 120A HD
Polska Grupa CNCPC1530
Skambinti
Gamybos metai: 2025, Sąlyga: naujas, This is a modern CNC machine tool dedicated to the industrial sector, used for cutting sheet metal and profiles with a plasma torch. It features a robust frame made from top-quality steel and aluminum, a large cutting range, the ability to cut elements of any shape, and low operating costs. High-end solutions used in its construction ensure reliable and safe operation. Material cutting is performed quickly while maintaining high detail accuracy. To achieve the desired shape, it is only necessary to import a file into the software, making this plasma cutter easy and intuitive to operate.
Our plasma cutters are primarily designed for processing the following materials:
- Mild steel
- Stainless steel
CONSTRUCTION
The plasma cutter frame is designed and manufactured from scratch in our factory. The high-quality steel used in the machine's production is cut, then welded and precision-machined. The entire frame, gantry, and gantry arms are reinforced with additional ribbing to ensure high rigidity and eliminate vibration and deformation.
DRIVES
Our plasma cutters are driven by high-resolution, high-torque AC Servo motors, which provide excellent acceleration and speed in all directions. These are highly dynamic and precise motors with feedback control, ensuring zero deviation through constant monitoring of operating parameters. The X and Y axes use classic, proven helical racks, delivering durability and precision.
Knsdpfx Asiqn Uuscujc
TORCH
We use components from the leading manufacturer PGCNC in our plasma systems. The torch technology significantly increases productivity and cutting speed. HD technology ensures improved hole quality, greater piercing efficiency, and bevel cutting capability. This guarantees high-quality, repeatable cuts and maximizes productivity at minimum operating and maintenance costs.
BLADE TABLE
The blade table is engineered for high-temperature operation. This allows for continuous work without the risk of burns that could prevent even material placement on the worktable. Knife placement can be easily adjusted depending on the dimensions of the parts being cut. The blade table is an excellent solution for cutting thicker materials.
SOFTWARE
The machine is equipped with 2D Starfire CAD/CAM software. Various features are available to the user, including importing prepared designs in vector formats such as .dxf, .plt, .ai, and .eps. The software enables fast and precise path generation for cutting.
POWER SOURCE
The machine comes standard with a 120A power source, characterized by high efficiency, excellent cut quality, and rapid cutting speeds.
AUTOMATIC LUBRICATION SYSTEM
The plasma cutter is also fitted with an automatic lubrication system, minimizing maintenance requirements. The central lubrication system is a simple, functional device used to deliver oil to contact points within the machine.
- POWER SUPPLY: 400V 50Hz
- MAXIMUM SPEED: 45 m/min
- GANTRY CLEARANCE: 200-600 mm
- TYPE OF WORKTABLE: blade
- WORKTABLE LOAD CAPACITY: 500 kg/m²
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

mažas skelbimas

504 km
Dviguba CNC spaustuvė Wysow 160 mm
Imadło maszynowe dwudzielne CNC 160 mm- 29.6kg
Skambinti
Sąlyga: labai geros būklės (naudotas), Parduodamas dviejų dalių Wysow 160 mm spaustuvas, skirtas frezavimo staklėms ir CNC centrams. Tvirta ketaus-plieno konstrukcija užtikrina didelį standumą ir stabilumą darbo metu. Žandų plotis: 160 mm. Žandų ištraukimas: 50 mm. Svoris: 29,6 kg. Grūdinti, rifliuoti žandai. Dviejų dalių konstrukcija leidžia įvairius nustatymo konfigūracijas. Skirtas sunkiam apdirbimui su įprastomis ir CNC frezavimo staklėmis. Geros būklės, visiškai veikiantis ir paruoštas darbui.
Knodpfjw Sfp Tsx Acusc
mažas skelbimas

520 km
Šviesolaidinis lazeris FC1530
Polska Grupa CNCFC1530
Skambinti
Gamybos metai: 2025, Sąlyga: naujas, The FIBER CUT laser cutting machines are a revolutionary solution on the laser cutting market. Innovative fiber laser technology enables much faster, more efficient, and cost-effective sheet metal cutting compared to CO2 lasers. These cutting machines feature high speed, productivity, and exceptional cutting accuracy. They deliver unparalleled precision and repeatability.
Our fiber lasers are primarily intended for processing the following materials:
- Non-ferrous metals
- Aluminum
- Stainless steel
- Carbon steel
LASER SOURCE POWER: 3000W
CONSTRUCTION
The frame of our laser has been designed and manufactured entirely in our factory. The high-grade steel used for machine production is cut, then welded, and precisely machined. The entire frame, gantry, and gantry arms have additional ribbing to ensure high rigidity and eliminate vibrations and deformations.
Knodeiqpanspfx Acuoc
DRIVES
Our machines are powered by high-resolution, high-power Schneider AC servo systems (Y1Y2 x 2000W, x 1500W, z 400W), ensuring proper acceleration and speed in all directions. Power transmission is achieved through high-quality planetary gearboxes. Classic, proven helical racks are used on the X and Y axes, ensuring durability and precision.
CUTTING HEAD
Sheet metal cutting is performed with a water-cooled WSX head. High-grade quartz glass lenses focus the dispersed laser beam on the material, ensuring high cutting accuracy. To maintain optimal processing, the HSU system automatically adjusts the head height, compensating for material irregularities. A protective window located between the nozzle and the lens shields the lens assembly from splashes of molten metal.
LASER SOURCE
The machine uses a Raycus Laser source, known for high electro-optical conversion efficiency, low energy consumption, and superior beam quality. This allows for faster, more effective operation and helps eliminate operator errors. The source is also resistant to back reflection, i.e., the return of the beam to the laser. Stable power output ensures efficient operation while minimizing energy consumption.
COOLING
Industrial S&A CWFL dual-temperature chillers are specially designed for cooling fiber lasers. These units are equipped with extensive alarm functions: compressor delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarm.
EXCHANGEABLE WORK TABLE
The exchangeable work table, located at the rear of the machine, minimizes laser downtime. Automatic table exchange takes only 10 seconds. This feature allows the operator to remove cut parts from the table and load a new metal sheet while the laser continues working on the other table. This system guarantees a very high production throughput.
AUTOMATIC LUBRICATION SYSTEM
To keep the machine in optimal condition, rack and guide rails must be lubricated with oil at least every few days. The automatic system initiates lubrication at preset intervals and in the correct quantity, with all parameters configurable via the software.
mažas skelbimas

504 km
CNC sukamasis stalas Fadal VH65 su Röhm Ø125 griebtuvu – 4 ašis
Stół obrotowy CNC Fadal VH65 z uchwytem Röhm Ø125 – 4 oś
Skambinti
Sąlyga: labai geros būklės (naudotas), Parduodamas profesionalus CNC sukamasis stalas, gerai žinomo gamintojo Fadal Engineering (JAV, Giddings & Lewis Inc. dukterinė įmonė), modelis VH65. Stalas aprūpintas Röhm ZG Ø125 mm tekinimo griebtuvu, kuris žymiai padidina pritaikymo universalumą. Techniniai parametrai: • Modelis: VH65 • Plokštės skersmuo: 165 mm (6,5”) • Perdavimo santykis: 90:1 • Pneumatinis stabdis (M60 ON / M61 OFF) • Röhm ZG Ø125 mm griebtuvas – maks. 4000 aps./min., sukimo momentas 80 Nm • Serijos nr.: 6660297 • Pramoninis daugiašakis jungtis. Būklė: naudotas, visiškai techniškai tvarkingas, su įprastais naudojimo pėdsakais. Tvirta, sunki konstrukcija – tikslumo ir ilgaamžiškumo garantija. Paruoštas veikti kaip papildoma 4 ašis apdirbimo centre.
Kedpfxow R Syie Acuenc
mažas skelbimas

504 km
CNC pasukamas stalas Fadal VH65 – 4-asis ašis apdirbimo centrui
Stół obrotowy CNC Fadal VH65 – 4 oś do centrum obróbczego
Skambinti
Sąlyga: labai geros būklės (naudotas), Parduodamas CNC rotacinis stalas žinomo gamintojo Fadal Engineering (JAV), modelis VH65. Profesionali 4-ašis skirta apdirbimo centrams, ypač Fadal VMC, tačiau galima integruoti ir su kitomis CNC staklėmis naudojant tinkamą valdiklį. Techniniai duomenys: • Modelis: VH65 • Disko skersmuo: 165 mm (6,5”) • Perdavimo santykis: 90:1 • Pneumatiniai stabdžiai (M60 ON / M61 OFF) • Pramoninis daugiapinis jungtis • Serijos nr.: 4630298 Būklė: naudotas, mechaniškai tvarkingas, normalūs darbo požymiai. Tvirta ir sunki konstrukcija – idealiai tinka preciziškai 4 ašių apdirbimui.
Kjdpew R St Nofx Acuenc
Palengviname jums paiešką: "denford cnc"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Denford Cnc (8 771)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Cnc
- Cnc Apdirbimo Centrai
- Cnc Apdirbimo Centras
- Cnc Arcade
- Cnc Dalijimo Galvutės
- Cnc Frezavimo Centras
- Cnc Frezavimo Stakles
- Cnc Fräsen Centrai
- Cnc Lietuva