Vienpakopė dalių valymo mašina

Pers Group Teijo C-1600SS-PD1

Single-stage cleaning machine

Operating principle, machine with lifting door

The tank of the cleaning machine is manually filled with tap water (optionally via the automatic filling valve AR-2) and heated by means of heating elements and thermostat settings. The time settings for the phases washing, dripping (optionally drying and steam extraction) are set via the “PROCESS TIMER”.

The parts are placed on the loading rack or loading trolley and pushed into the cleaning chamber. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport parts into the cleaning cabin.

The lifting door is closed, the machine is started, and the wash pump delivers the cleaning fluid onto the items to be cleaned via the rotating spray systems. The rotation of the upper and lower spray pipes is activated by the reaction force of the reaction nozzle located at one end of the spray pipe. The rotational speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes equipped with nozzles.

After the washing time has elapsed, a short dripping phase follows, during which the used cleaning fluid is returned to the wash tank via the filter baskets. Optionally, the cleaning fluid from the washing stage can be filtered using a filter unit (EFG-6 or PP197).

Fgodpfxevvuzcs Acuoh
An additional stage such as pre-washing or rinsing is optionally possible via the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated), which is drained via the drain valve. Optionally, the parts can be dried after cleaning using a drying unit.

After the cleaning process, the lifting door is partially opened for steam extraction. The steam from the cleaning chamber is either extracted using the steam extractor (DF-250S) or condensed and returned to the tank via the steam condenser (FX6002). Both accessories are optional and not part of the standard machine equipment.

After the steam extraction time has elapsed, the lifting door opens fully and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door if an object is detected in the doorway.

The cleaned components can be removed from the cleaning cabinet onto a loading area or a loading trolley.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.