Hidraulinės profilio plieno žirklės + skylių štampavimo mašina

PEDDINGHAUS Peddicat 360 H

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: Cgedpfxov Szwce Ah Sen Power output: 630 kVA Primary voltage: 20 kV Secondary voltage: 400 V Frequency: 50 Hz Voltage: 400 V / Hz Rated current: 18.2/24.2 A Weight: 2.6 t per unit Dimensions (L x W x H): 1.7 x 0.82 x 1.66 m DRY-TYPE TRANSFORMER – mounted on U-beam base frame Two transformers are available for sale. Both units come with an enclosure (currently disassembled, see photo). No. 1 No. 2

Sąlyga: naudotas, Gamybos metai: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10000 (±2 x 2.5%) / 400 V, Dyn5-11-1, IP23 or IP00, forced ventilation AF, Al/Al windings, temperature monitoring unit, fully functional, very good condition, 2 units available Cgodpoquwtxefx Ah Ssn

Sąlyga: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Stroke cylinder: 350 mm Column diameter: 200 mm Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Cgedjkvnumepfx Ah Sen Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 000 mm, bendras svoris: 820 kg, keliamoji galia: 500 kg, The offer concerns the following set: (possibility to adjust device specifications or purchase the vacuum lifter or crane separately) - Vacuum lifter for panels, designed for handling, among others: MDF panels, laminated boards, raw panels, particle boards, etc. (model: WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for panel handling - Actuator for vertical-horizontal rotation - 6 suction cups Ø 200 mm - Structure enables adjustment of suction cup configuration to fit materials being moved - Beam length: 2500 mm - Each suction cup equipped with a ball valve – allows individual deactivation - Air impulse function to prevent the “sticking” effect of materials - Independent X and Y-axis adjustment for each suction cup - Operator control from console (control panel): - Aggregator on/off - Vacuum suction/release - Electric hoist thumb control – lifter up/down - Pressure gauge - Powered by compressed air – fitted with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary Jib Crane Technical Data: • Column height: 4 m • Height under arm: 3 m • Arm length: 4 m • Capacity: 400 kg • Slew range: 270 degrees • Lifting speed: approx. 3 m/min • Color: any RAL palette color • Manual rotation • Manual trolley • Quadruple/double needle-bearing arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Single-phase electric hoist • Manual trolley • CE certificate Csdpsxln Drjfx Ah Sjgn • Complete documentation Standard warranty: 12 months

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed range: 63 - 3,150 rpm Infinitely variable feed: 12-3000 / 6-1500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with path control, mechanical handwheels, rotatable tilting table +/- 45°, hydraulic tool clamping, semi-enclosure, Cgsdpfjk Hdu Dox Ah Son coolant tank, manual

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Large, semi-automated Pace cutting system Polar 137 XT-Autotrim with stack lift, jogging unit with counting scale, gripper transport system, turning gripper, and unloader, built in 2010, with approximately 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogging unit by the operator, jogged, and then automatically transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as required. After cutting, the Transomat automatically places the layers onto a pallet, while cutting can continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Equipped with steplessly adjustable reflex light barriers for automatic lifting or lowering. Jogging Unit RAH-4 with air removal roller and discharge for rear table feeding Usable format up to 75 x 105 cm. The jogged material is automatically discharged to the rear into the STR stack rack. The Autotrans gripper transport system then handles the layer transport to the rear table of the high-speed cutter. Sheet scale – Polar Counting Scale Avery Weigh-Tronix Cgedexd U Saopfx Ah Ssn for creating precisely measured cutting layers. Gripper transport system POLAR Autoturn – Clamp transport for rear table loading and turning gripper takes the prepared cutting layer from the stack rack or buffer table. Via air tables, whose air cushion optimizes material flow, the material is directly conveyed to the rear table of the high-speed cutter and deposited precisely there. The gripping system holds the cutting layer firmly during transport, ensuring layers stay perfectly aligned even when pre-aligned. Cutting machine Polar 137 XT-AT with touch operation and Autotrim function for automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear table loading), also enabling formats with a diagonal of...

Sąlyga: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. Cgedpfxou R Szao Ah Sjn SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Gamybos metai: 2009, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 527, Offer 23035 Technical specifications (approx.): - Punching force: 30 t - Max. sheet thickness: 10 mm - Max. punching diameter: 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke: 7 – 70 mm - Throat depth: 560 mm - Max. strokes per minute: 120 spm - Single stroke / continuous stroke Cedjlnkc Ujpfx Ah Segn - Drive: 400 V / 4 kW - Space requirement (approx.): W 8000 x H 1850 x D 1700 mm - Weight (approx.): 1900 kg Includes: - Stop table with stops - Foot switch - Emergency stop button - Quick-change punch system - Various punch and die holders

Sąlyga: paruoštas naudoti (naudotas), With hydraulic pump. Cgedpfx Aohw E D Sjh Son

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Cgsdpeb U Hwpsfx Ah Sjn Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch