Skylių perforatorius

PEDDINGHAUS HYDRAULIC 280

Sąlyga: geras (naudotas), Gamybos metai: 2002, From business closure: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Max. punching and shearing capacity: 1,000 kN Punches 31 mm holes in 25 mm steel Kdsdpfst Iklksx Af Iog Shears flat bar up to 500 mm length with a material thickness of up to 18 mm steel Contact length stop included A wide range of accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) Kjdpfx Asl Dw D Esf Iedg - Weight: 3560 kg

Gamybos metai: 1982, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 82-540, Offer 18474 Technical Specifications: - Flat bar shear cuts flat bars up to 100 x 18 mm - Blade length approx. 250 mm - Profile steel shear cuts angles - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar shear cuts: - Round steel: 90° up to 36 mm Ksdpfx Ajg Eubnef Iedg - Square steel: 90° up to 30 mm - Notching unit for sheets up to 8 mm - Punching unit: - Punching force approx. 50 t - Throat depth 350 mm - Punches steel up to 20 mm Ø in 15 mm - Drive: 400 V / 3 kW - Space requirement approx. W 1100 x H 1700 x D 2300 mm - Weight approx. 1,900 kg

Sąlyga: naujas, Sheet thickness 1.2 mm Roll diameter 62 mm Throat depth 100 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Space requirement approx. 1.1 x 0.5 x 1.3 m Kjdpfx Afsfv H Edj Isdg Machine is equipped with: - Emergency stop switch - Foot switch - 7 sets of rollers

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 2520, Round steel: 42 mm Square steel: 38 mm Angle steel: 90° 110x10 mm Flat steel: 150 x 16 mm Blade length: 250 mm Notching depth up to: 12 mm Notching device: L- and T-steel: 80 x 10 mm Punching unit: Press force: 50 t Stroke: 27 mm Punching unit: Capacity (diameter x thickness): 25 x 16 / 20 x 19 mm Machine weight approx.: 1.6 t Space requirement approx.: 1.6 x 0.85 x 1.8 m Kdjdjcxxrpepfx Af Ijg

Sąlyga: geras (naudotas), Gamybos metai: 2001, Trennjaeger TEBA 240 DG Cutting capacity round: 240 mm Cutting capacity rectangular: 230 x 230 mm Motor: 1.5 kW Dimensions: 1,950 x 1,650 x 1,000 mm Kdodpfsu Ekw Nex Af Ijg Mitre cuts: 90° / -45° / +45° / +60° Cutting speed: 40/80 m/min.

Sąlyga: paruoštas naudoti (naudotas), bendras ilgis: 5 500 mm, bendras plotis: 1 400 mm, bendras aukštis: 1 000 mm, tuščias svoris: 600 kg, Vamzdžių lenkimo staklės: vamzdžių skersmuo 6 – 48 mm, pilnam medžiui: maks. 30 mm, su įrankiais vamzdžių skersmeniui 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm. Maks. vamzdžio skersmuo x storis: Ø 6 – 48 mm (45 kg / mm²). Maksimalus lenkimo spindulys: 180°. Kdodpfx Afjxcqi Ee Ijg

Gamybos metai: 2017, Sąlyga: labai geros būklės (naudotas), Dydis: 1290x900x40 mm (45x20 mm), naudotas, cinkuotas (42 vnt.) Dydis: 1290x1145x40 mm (45x20 mm), naudotas, cinkuotas (44 vnt.) Grotelinė danga 1290x900x40 mm (45x20 mm) – 69 EUR/vnt. be PVM Grotelinė danga 1290x1145x40 mm (45x20 mm) – 90 EUR/vnt. be PVM Jei reikia lentynų ar priedų kitose komplektacijose ar variantuose, susisiekite su mumis. Ksdsqfd Hgjpfx Af Iedg Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą – mielai padėsime planuojant. Taip pat tiekiame papildomą įrangą, pavyzdžiui: rėmai, kampų ir priekinės apsaugos, pravažiavimo apsaugos, iškritimo apsaugos, medžio drožlių plokštės, grotelinės dangos, galiniai tinklai, gylio sijos. Siuntimas: Susisiekite, nurodydami pašto kodą, miestą ir pageidaujamą gaminių kiekį, kad galėtume apskaičiuoti transportavimo išlaidas. Papildomos paslaugos: planavimas, lentynų montavimas/demontavimas, supirkimas/pardavimas. Techniniai duomenys, aprašymai ir kainos gali būti keičiami. Pasiliekame teisę į klaidas ir tarpinius pardavimus!

Sąlyga: naujas, Gamybos metai: 2025, Delivery every Monday and Tuesday! Reliable! Three-segment segmented folding machine with foot operation SGR-1000mm/1.5mm Kdjdpfxjcvbu As Af Ieg EU Manufacture Folding bench with foot control Segmented clamping beam, lower beam and folding beam - Precision-ground bending segments - Segments with triple guides for easy and fast adjustment - Full-featured folding bench with foot control - Piano key inserts in the upper, lower, and folding beams provide a wide range of bending possibilities - Cassettes and special profiles with opposing bends are easily produced with this model - Our folding machine is a well-dimensioned, fully welded construction featuring foot-operated upper beam adjustment, significantly simplifying and accelerating workflow as both hands remain free to load and align material - The quickly and easily adjustable bending angle stop guarantees safe production and repeated reproduction of the required bending angle, even for large-scale batches - Clamping beam, lower beam, and folding beam all segmented (piano style) - Segments are movable and removable - Precision-ground bending segments made from extremely tough and hard special alloy steel - Folding beam can be effortlessly operated due to robust pressure spring/spring damper - Heavy, robust design for decades of continuous operation - Convenient opening and closing of the clamping beam Technical Data: - Max. working width: 1000 mm - Maximum bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 235 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams fitted with segment jaws (full segmentation) - Adjustable stop for preset bending angles - Degree scale - Clearance: 100 mm Price: €4,700 Set of swivel castors included Scribing template FREE! Delivery time: Weekly Cash payment on delivery Delivery costs: €180 throughout Germany Please get in touch with us :) We look forward to hearing from you! Invoices are issued either at 0% as intra-community delivery or with an additional 19% VAT.

Gamybos metai: 1990, Sąlyga: naudotas, Cutting diameter: 420 mm Saw band length: 4800 mm Table height: 600 mm Kdedpfxel Ichne Af Ijg Total power requirement: 3.8 kW Machine weight: approx. 1.3 t Space requirement: approx. 2500 x 1200 x 1600 mm The band saw is in very good condition.