Hidraulinis skylių perforatorius

Peddinghaus Hydraulic 1001

Būklė: naudotas, Pressure: 100 t Punching cross-section in sq mm: Ø 31 in 25 mm Stroke: 10 - 50 mm Throat depth: 510 mm Working height: 1100 mm Strokes per minute: 14 - 45 spm Max. punching diameter: Ø 90.0 mm Oil capacity: 103 l Total power requirement: 7.5 kW Machine weight approx.: 2400 kg Dimensions (L x W x H): 1750 x 1020 x 2050 mm Well-maintained condition (!!) Original price without accessories approx.: 25,000 Euro Special price on request Equipment features: - Heavy-duty, robust electro-hydraulic punching machine with large throat depth - Punching station with material/sheet stripper - Infinitely adjustable stroke: 10-50 mm - Freely movable foot switch incl. protective cover Gbjdjxabrfjpfx Ac Dok - Hydraulic low-pressure finder for foot pedal operation - Crane lifting eye for easy transport - Side storage surface - Integrated hydraulic power unit - Three-phase motor, 400 Volt, 50 Hz - Original operating manual

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. Gbodpfx Acshzbips Dek - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Gamybos metai: 1997, būklė: naudotas, Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes sight for center punching and setup Range of tools included in the price Gsdpfx Acsizuhpe Djbk

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Tank turning device, 10 ton load capacity Continuously variable speed control Hand and foot remote control For diameters from 320 mm to 2,800 mm Roller diameter: 300 mm Godpfed Nmx Tex Ac Dobk Speed: 6–60 m/h Power: 2 x 0.55 kW

Būklė: naudotas, bendras ilgis: 1 330 mm, bendras plotis: 1 040 mm, bendras aukštis: 1 150 mm, Svoris be krovinio: 1 800 kg Kaina: pagal užklausą - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Valdymas: Konvencinis - Veleno skersmuo [mm]: 85 - Apskritimo skersmens talpa [mm]: 60 - Transportavimo matmenys: 1330mm x 1040mm x 1150mm (i x p x a) - Transportavimo svoris [kg]: 1 800kg - Transportavimo paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimo schema: PVM atskaitomas juridiniams asmenims Gbjdpfx Aexuf Sloc Dok Pristatymas ir priėmimas mainais visuomet galimi visiems pramonės įrenginiams Lukas van Rossum

Būklė: paruoštas naudoti (naudotas), Width: 1000 mm Length: 1500 mm Plate height: 195 mm Gbedpsgq Nawsfx Ac Dok Leg (support foot) height: 600 mm Total height, working height: approx. 800 mm Weight:

Būklė: naujas, Load capacity 10 t Workpiece diameter 100 - 3200 mm Drum diameter 300 x 120 mm Gbedpsf Ep Diefx Ac Dsk Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Features • Electronic components by Siemens/Schneider/Delta • Frequency-controlled drive speed • Rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Wired remote control • Double foot pedal • 3-year warranty (see warranty terms)

Gamybos metai: 1998, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 0159488169537, Offer 23293 Technical Data: Gbedpfx Aepuy H Dsc Djk - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel: 9 mm - or with special punching device: up to 100 mm Ø in steel: 2.5 mm - Stroke, infinitely adjustable: 0 to 28 mm - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - with: - Foot switch - Center punch locating device - Support table with folding stops, W 1100 x D 850 mm - Stop adjustment paths from center of punch - Width between left and right approx. 470 mm x D 510 mm

Būklė: naudotas, Gamybos metai: 1991, Drilling capacity in steel (diameter) 50 mm Gbsdpou Sblwsfx Ac Djk Outreach 1100 mm Workpiece height - max. approx. 1000 mm Drilling capacity in cast iron 60 mm Spindle taper MK 5 Spindle speeds 28 - 2500 rpm Feeds 0.05 - 2 mm/rev Quill stroke 300 mm Distance base plate - spindle nose 630 - 1380 mm Vertical arm adjustment 750 mm Total power requirement 6 kW Machine weight approx. 4 t Machine dimensions L x W x H 2,740 x 1,140 x 2,590 mm - with tapping unit - Accessories: Cube table LxWxH = 550 x 550 x 550 mm, machine vice, coolant system

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 5336, Load capacity: 6000 kg Faceplate dimensions: 1500 x 1500 mm Tilting range: horizontal to -145° Gsdegbt Sqjpfx Ac Dsbk Rotational speed: 0 - approx. 1 rpm Electrical connection: 400 V, approx. 5 kW Required space: 2800 x 2350 x 3250 mm Weight: 5000 kg