Skylių perforatorius

Peddinghaus 225B/45

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 550C08, A used PEDDINGHAUS punching machine with large throat depth and large support table with stops. Punching capacity: 45 tons Strokes: 40 strokes/min Throat depth: 762 mm Working height: 1110 mm Ljdpfx Aksd Hxrtjvohh

Gamybos metai: 2009, būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 527, Offer 23035 Technical specifications (approx.): - Punching force: 30 t - Max. sheet thickness: 10 mm - Max. punching diameter: 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke: 7 – 70 mm - Throat depth: 560 mm - Max. strokes per minute: 120 spm - Single stroke / continuous stroke - Drive: 400 V / 4 kW - Space requirement (approx.): W 8000 x H 1850 x D 1700 mm - Weight (approx.): 1900 kg Includes: Ledpfelnkc Usx Akvohh - Stop table with stops - Foot switch - Emergency stop button - Quick-change punch system - Various punch and die holders

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Lhsdpfx Aofxpbmokvoh

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. Ljdpfxst Hw Shj Akvohh 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Kraštų lankstymo presas Trumpf TruBend 3170 B26 Techniniai duomenys Lankstymo ilgis: 4080 mm Spaudimo jėga: 170 t Rėmų atstumas: 4404 mm Lsdpfxsx Hwcpe Akvjhh Metai: 2022 Darbo valandos: 2 700

Būklė: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced, CNC-controlled notching and cutting system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location via a pull-type clamp measuring carriage on the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The finished cut or notched components either fall into a collection tray or are pushed out of the system by the measuring arm. Thermal cutting units: The Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting with oxy-fuel and/or plasma. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD is used, suitable for material thicknesses up to 32 mm. Thicker materials or bevel cuts exceeding 32 mm are processed using the oxy-fuel cutting unit. Transport system: On the infeed side, ahead of the Ficep Flex FRC notching system, there is a chain drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported on a sturdy roller conveyor into the machine using a clamp measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a roller conveyor width of 1,300 mm on both the infeed and outfeed sides. For removal of finished components on the outfeed side, there are four chain drag transverse conveyors, each 6,450 mm long, installed after the notching system. Mitrol CNC control and Pegaso Software: The system is operated using a modern CNC control unit from Mitrol. This reliable CNC control is developed by Ficep’s in-house manufacturer Mitrol and includes Pegaso software with remote maintenance capability and a data transfer interface. Torit DCE Filter Unit: Ljdetwm Ubspfx Akvshh The dust extraction filter unit is supplied by Donaldson Torit DCE. Safety: via fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Būklė: geras (naudotas), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Lhjdpjw Emf Djfx Akvjh DE - 44143 Dortmund - Wambel

Būklė: naudotas, Gamybos metai: 1996, Techninės detalės: Spaudimas: 300 t Lenkimo ilgis: 6000 mm Valdymas: Delem DA 24e Atstumas tarp statramsčių: 2x5100 mm Iškyša: 645 mm Įmontavimo aukštis: 520 mm Lakšto storis: 5 mm Bendras galios poreikis: apie 10,0 kW kiekvienai mašinai Apytikslis mašinos svoris: apytiksl. 66 t Mašinos matmenys: ilgis 12,0 x plotis 2,3 x aukštis 3,65 m Hidraulinė lankstymo staklė 6000 mm x 300 t su įmontuotu įrankiu. - Konsolės ilgis = 720 mm Lhjdpsu Ib Drefx Akvsh - Įskaitant galinį atmušėją (be bombiruotės) reguliuojamas horizontalus/vertikalus eigos gylis: 680/200 mm varikliu valdomas Papildomai galima pasiūlyti dvi tokias lankstymo stakles pardavimui: - Gali būti naudojamos kaip tandem lankstymo staklės, kai lenkimo ilgis 12.000 mm, spaudimas 300 t/kiekviena, darbinio stalo dydis: plotis 165 x ilgis 12000 mm, - Programavimas sinchroniškai abiems lankstymo staklėms arba naudojimas atskirai. Papildomai galima įsigyti įvairių įrankių. Yra dokumentacijos kopija. I.D.

Būklė: geras (naudotas), 1 used radial drilling machine Make: Stimin Model: GR 820 H Serial No.: 773 Year: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Drill spindle taper: MK 6 Drill spindle stroke: 390 mm Spindle speeds, 24 steps: 20 – 1400 rpm Right-/left-hand rotation Feed, 12 steps: 0.045 – 1.5 mm/rev Drive: 400 V / 14.5 kVA Arm and drilling unit clamping: electromechanical Distance from machined machine bed to drilling spindle: min. approx. 400 mm max. approx. 1800 mm Lhodpfx Aetzctmokvoh Usable machine bed with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Required floor space approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8,500 kg

Gamybos metai: 2007, būklė: geras (naudotas), Danobat CNC Bohr-/Sägeanlage – Baujahr 2007 Einzelner rotierender Bohrspindel. 18 Meter Einlaufrollenbahnen. 12 Meter Auslaufrollenbahnen. Pinchereinheit für den Vorschub. Quertransfers am Einlauf. Lodpeig T Amefx Akvehh Quertransfers am Auslauf. Kapazität: 750 mm. Sägekapazität: Runde Schnittkapazität (ohne vertikale Spannbacken, Winkel 0 Grad): 520 mm. Rechteckige Schnittkapazität (ohne vertikale Spannbacken, Winkel 0 Grad): 700 mm x 500 mm. Maximale Kapazität mit vertikalen Spannbacken: 700 x 500 mm. Runde Schnittkapazität bei 45 Grad Drehung: 450 mm. Rechteckige Schnittkapazität bei 45 Grad Drehung: 450 x 500 mm.