Kompaktiškas krautuvas su krano rėmu

Paus PGS 9

Sąlyga: paruoštas naudoti (naudotas), Forklift Manufacturer: Jumbo Model: J60 DC12 Godpfovtwuasx Abdsbg Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours For sale due to conversion to wheel loader All service and lubrication intervals have been carried out as documented in the inspection log! All filters (hydraulic, fuel, torque converter, air) replaced annually. Engine oil filter and oil changed every 250 operating hours. Only B0 diesel fuel has been used (no B7). Immediately available – fully functional Location: Austria, near St. Pölten

Sąlyga: naudotas, Technical details: Swing diameter over bed: 350 mm Gjdpfovadd Iex Abdebg Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (cross): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total connected load: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m Mikromat precision lathe - Longitudinal slide travel = 580 mm; Cross slide travel = 170 mm; Top slide travel = 130 mm - Workpiece clamping via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Tool holder: Multifix quick-change toolpost Equipment: Coolant pump 4 machine levelling feet Copying device

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, Pressure: 45 tons Installation height: 205/305 mm Table: 700 x 450 mm Ram: 700 x 360 mm Ram adjustment: 50 mm Stroke: 10 - 50 mm Gbjdsgfvnnopfx Abdog Strokes per minute: 80 - 400 Power requirement: 11 kW Weight: 7,200 kg Height: 3,100 mm Siemens S7 control Gripper feeder

Sąlyga: naudotas, Gamybos metai: 2002, Swing diameter: 820 mm Turning length: 2,000 mm Control: SIN 810 D Centre height above flat bed: 400 mm Swing diameter over cross-slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed, gear stage 1: 6.40 - 376 rpm Spindle speed, gear stage 2: 27.40 - 1,600 rpm Gsdjw Dvipjpfx Abdobg Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose DIN 55027 – size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MK 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight approx.: 11.00 t Space requirements approx.: 6.00 x 3.00 x H2.60 m Control: SIEMENS Sinumerik 810D, chip conveyor, tailstock, extraction unit, 2 pcs. steady rests. Spindle bearing serviced by OEM in 04.2023 Machine can be inspected under power.

Sąlyga: geras (naudotas), Gamybos metai: 1989, 2-color straight offset press with low pile delivery; 48x66cm, latest modified version of this model (i.e., the best one) Gsdjtyqhqepfx Abdobg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, veikimo valandos: 2 980 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 5 625 mm, laisvas kėlimas: 1 890 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 645 mm, šakių ilgis: 1 200 mm, tuščias svoris: 5 500 kg, bendras ilgis: 2 500 mm, pavaros tipas: Elektro, statybos plotis: 1 400 mm, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 – 4,999 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Very good Front tires, type: Non-marking Front tire size: 315/45-12 Front tire condition: 80 – 100% Rear tires, type: Non-marking Rear tire size: 180/70-8 Rear tire condition: 80 – 100% Battery voltage: 80V Gbsdpfxsurz Scj Abdog Battery capacity: 775Ah Battery type: PzS Battery year: 2017 Battery condition: 80 – 100% Sideshift, 3rd valve, 4th valve, rear working light, front working light, overhead guard, full free lift, joystick,

Gamybos metai: 1992, Sąlyga: paruoštas naudoti (naudotas), Max. paper size: 720x1040mm, min. paper size (straight printing): 360x520mm, perfecting (straight/reverse printing): 440x520mm, paper thickness: 0.06–0.5mm, max. print area (straight printing): 710x1030mm, perfecting: 700x1030mm, max. throughput straight/perfecting: 7000/5000 sheets/h, plate size (recommended): 790x1045mm, print start: 48mm, gripper margin without print: 10.5mm ±1mm. Gjdpfx Aew Azubjbdebg Equipment: Miller TP 104 base machine with two printing units, sheet reversal between first and second printing unit, numbering tower with control system for accommodating mechanical numbering machines by Zeiser and Leibinger (without numbering units), Spiess TP 104/1 feeder, load capacity: 10,000N. Remote adjustment via control desk: ink control for 1st and 2nd printing units, fine adjustment for circumferential and lateral register: ±1.5mm, plate cylinder, 2x front plate clamping bars – single – only rear bar split, blanket cylinder washing device – completely defective, manual cleaning, powder sprayer without additional regulation, delivery extension with additional area after numbering unit approx. 1.85m, 10x ink form rollers, 8x ink transfer rollers, 1x blanket roller, 1x wash-up roller, 1x ductor roller, complete documentation.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6F070, bendras ilgis: 1 800 mm, bendras plotis: 1 150 mm, bendras aukštis: 1 600 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 200 V, galia: 3 kW (4,08 AG), bendras svoris: 1 400 kg, Įranga: dokumentacija / vadovas, 1978, a highly original and excellently maintained single-color offset press from the Japanese manufacturer Sakurai, featuring a numbering, perforating, and embossing unit that has never been used (still coated in Tectyl and purposefully left uncleaned by us), is truly a top-class machine for its time—especially when compared to other brands, including Heidelberg’s GTO46. This is a very attractive and robust press. Paper format: 32 x 49 cm, compatible with the same plate sizes as the widened Rotaprint models of that era, as well as Romayor and Fuji 50. The condition of this machine is so pristine that it could practically be displayed in the manufacturer’s showroom. Gbedpfsuga U Dsx Abdjg All documentation is included: complete electrical diagrams with legend and a parts manual belonging to this specific machine.

Sąlyga: naudotas, in various sizes, pressing force 22T-24T, bearing marks, price per piece plus VAT Gsdpohbqtmsfx Abdsbg

Sąlyga: naudotas, Grinding wheel diameter: 0 mm Drive power: 0 kW The following grinding spindles are in stock: 1 pc. Fortuna FAVS 100 R, 250.250, 12,000 rpm – €700 each 1 pc. SKF 1033293-1 (ex Hoefler) – €1,200 each 1 pc. SKF 1033293-2 (ex Hoefler) – €1,200 each 1 pc. SKF 1040329 (ex Hoefler) – €1,700 each Gbjdped Ig U Rjfx Abdsg