Lizdų gręžimo mašina

Panhans 116 H

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Equipment Features: With innovative locking device for safe container positioning All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Bodpfx Aascnw U Dshjld Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: naudotas, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Bsdpexl Ha Sofx Aahold Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressure 2 kg/cm² Heating: 2 x 1.8 kW - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction unit for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine mounted on chassis Installation footprint (according to manufacturer): 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as seen”. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex stock

Sąlyga: labai geros būklės (naudotas), Belt Sanding Machine LANGZAUNER Type LZG Approx. sanding table dimensions: 2500 x 800 mm Approx. sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Belt reversible for right/left rotation Bsdpfjuxnyuex Aaheld Sanding belt cover on top Work area with light bar CE compliant Includes special sanding shoe Includes extraction fan NEW GRAPHITE CLOTH Note on used machinery: • Technical data and intermediate sale subject to error and change. • Prices quoted are ex-works—free loaded! • All machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread Blodpfx Aajh U Damohjd 2x safety clamps Pneumatic foot switch Table size: 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact details.

Sąlyga: naudotas, Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Valdymas: Memory Plus Blsdpfx Aoxmh U Heahed Komplektas mašinų kompaktiškai obliavimo linijai, sudarytas iš: - Keturpusė obliavimo staklė Weinig Powermat 700, pagaminta 2022 m. - Briketų presas Spänex SHB 250, pagamintas 2019 m. - Išilginio pjovimo diskinis pjūklas Jrion HFS-170/15-SA - Ryšuliavimo mašina StraPack RQ-8S - Juostinis atpjovimo pjūklas Hema UH 800 TR - Nusiurbimo sistema Spänex filtro bokštas ir Höcker Polytechnik ventiliatorius Įranga vis dar veikianti ir gali būti apžiūrėta veikianti bet kada. Galima susitarti dėl prieinamumo nuo 2026 m. kovo mėn. Daugiau informacijos suteiksime pagal užklausą. Galimas ir pavienių įrenginių pardavimas pagal susitarimą.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, nice veneer saw with planer unit Bedsq Rb Irjpfx Aaheld cutting length 3100 mm with rear stop

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Tread milling machine SELECT 20800 for recessing treads and risers into stair stringers and posts. Blsdpfowut Absx Aahod The machine is equipped with stops for tread length, tread thickness, riser length, riser thickness, and nosing dimension. Both a tread and a riser can be milled in a single clamping operation in approximately 1 minute. Workpieces can be clamped in just one second. This machine is the ideal solution for professional staircase manufacturers. Power supply: 3-phase, 400 V. Maximum clamping height: 300 mm.

Sąlyga: naujas, Velenų skaičius: 6 vnt. Darbinis plotis: 250 mm Obliavimo aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 6–24 m/min. Svoris: 4770 kg Matmenys (Ilgis/Plotis/Aukštis): 4722x1860x1776 mm Keturių pusių obliavimo staklės Kuper SWT XL-6, langų versija su elektroniniu ašių bei radialiniu velenų reguliavimu. Tvirta, nedeformuojama ir žemo vibracijos lygio staklių bazė. Velenų skaičius: 6 Darbinis plotis: 250 mm Darbinis aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Veleno apsukos: dažnio valdomos 4000–8000 aps./min. Padavimo greitis: 6–24 m/min Išsamesnį aprašymą rasite pridėtame PDF faile! (Techniniai duomenys pagal gamintoją – be garantijos!) Blodpfevnv Ubsx Aahjd

Sąlyga: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Blodsd Rg Dpopfx Aahsd Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Sąlyga: naudotas, Number of milling spindles: 2 units Fence: 1 unit Tooling: yes Bodpfx Aowi Upfsaheld Cross Bar Milling Machine STEGHERR, Type KSF-mini ----- Including fence ruler with scale and adjustable stop. Tools included. Specialized milling machine for the efficient production of cross bar joints. The cross bar milling machine KSF-mini incorporates STEGHERR’s extensive experience in the construction of these specialized machines for cross bar joints. With the KSF-mini, all cross bar joints commonly needed in practice can be manufactured quickly and with a precise fit. Even pre-profiled muntins can be machined on the KSF-mini. Precision milling is achieved as the workpiece is clamped and machined on three sides in a single setup. Tool drive is provided via two three-phase motors; pneumatic clamping for the workpieces. The profile cutter is configured to match the rail width. The saw blades, used to trim the joint, can be adjusted to the profile cutter dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V 50 Hz Pneumatic pressure: 6 bar Included: ----- Table frame Foot switch Tooling as depicted: 1 profile cutter 3 saw blades (corresponds to a rail width of 10 mm) Fence ruler with scale and adjustable stop as shown in the pictures. Dimensions (LxWxH): approx. 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical data according to manufacturer, subject to confirmation!)