Popieriaus spauda

PALL Likon 200

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed Ksdpjvwlqqefx Af Ijdg - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Kjdevgrh Ujpfx Af Iedg Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 2 632 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 29.381, spaudimo jėga: 35 t, pildymo angos plotis: 620 mm, pildymo angos ilgis: 1 000 mm, bendras plotis: 2 380 mm, bendras aukštis: 2 500 mm, bendras ilgis: 6 625 mm, Įskaitant padavimo juostą. Mašina iš karto paruošta darbui. Kdjdjvaw T Aspfx Af Isg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 71 t, pildymo angos plotis: 1 080 mm, pildymo angos ilgis: 1 620 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 600 kg, bendras plotis: 3 450 mm, bendras aukštis: 4 090 mm, bendras ilgis: 10 020 mm, įėjimo įtampa: 400 V, bendras svoris: 27 000 kg, triukšmo lygis: 85 dB, slėgis: 300 juosta, transporto aukštis: 2 300 mm, galia: 37 kW (50,31 AG), Visiškai automatinis kanalinio tipo presas su prispaudimo sklende, prieinamas iš karto. Mašina įskaitant konvejerį su grindų dalimi ant grindų. Presas pristatomas atnaujintoje būklėje, o konvejerio juosta buvo atnaujinta metų pradžioje. Mašina išimta iš gamybos spalio pradžioje ir šiuo metu laikoma mūsų patalpose. Mašiną galima apžiūrėti veikiant mūsų vietoje. Ši įranga puikiai tinka presuoti popierių/kartoną ir įvairias plastiko rūšis, pvz., PET, HDPE bei didmaišius. Techniniai preso duomenys: Kdedpfx Aexl Rqbsf Isg Variklis: 37 kW Presavimo jėga: 71 t Balių matmenys: 1100 x 720 x 1300 mm (ilgis reguliuojamas) Vielų skaičius: 4 vertikalios Pildymo bunkerio matmenys: 1620 x 1080 mm Balio svoris: iki 600 kg (priklausomai nuo medžiagos) Našumas: iki 20 t/val. (priklausomai nuo medžiagos) Transportavimo svoris: 27 000 kg Techniniai konvejerio duomenys: Horizontalaus ruožo ilgis: 3000 mm Pakilimo dalies ilgis: 7424 mm Kampas: 29° Užpildymo galimybė: ant grindų

Sąlyga: naudotas, Gamybos metai: 2014, spaudimo jėga: 122 t, bendras svoris: 40 000 kg, slėgis: 315 juosta, Machine has been used internally but is now surplus and therefore offered for sale! Kdodpfowa N U Dox Af Ijg

Sąlyga: geras (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Automatinė kanalinė presas BOA Continu 25 LB + transporterio juosta. Presas geros būklės, reguliariai prižiūrimas. Neseniai visiškai suremontuota Denison siurblys. Veikia nuolat. Susisiekite su mumis dėl papildomos informacijos. Kedjw S Tv Uepfx Af Iodg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 19 187 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 140 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 500 kg, bendras svoris: 52 000 kg, Technical Specifications – Baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 140 Year of Manufacture: 2017 Operating Hours: 19,187 hours (as of October 2025) Main Pressing Force: 140 t (max. 153.5 t) Pre-Pressing Force: 70 t Feed Opening Dimensions: 1,600 x 1,100 mm Filling Volume per Press Cycle: 4.34 m³ Theoretical Cycle Time: 16 seconds Bale Dimensions: 1,100 x 1,100 mm Drive Power: 2 x 75 kW Connected Load: 226 kW Total Current Consumption: 428 A Tying: 5-fold vertical, fully automatic Throughput Rates at Bulk Density: – 30 kg/m³: approx. 30 t/h – 50 kg/m³: approx. 46 t/h – 100 kg/m³: approx. 82 t/h Bale Weights: 800 to 1,500 kg, depending on material and bale length PLC Control (Manufacturer, Type): Telemecanique TSX Micro Operating Panel (Manufacturer, Type): Schneider MAGELIS Touch Overall Dimensions (assembled, with hopper and conveyor): 13,200 x 27,000 x 7,333 mm (L x W x H) Transport Dimensions (baler only): 13,200 x 2,750 x 3,450 mm (L x W x H) Machine Weight (baler): approx. 52 t Technical Specifications – Conveyor: Manufacturer: Bollegraaf Model: HBT 1216 Kdedpfsxrta Eox Af Ieg Year of Manufacture: 2017 Drive Power: 7.5 kW Feed Belt Length: 6,750 mm Incline Belt Length: 14,400 mm Gooseneck Length: 2,150 mm Incline: 30° Usable Width: 1,754 mm Sidewall Height (feed belt): 500 mm Sidewall Height (incline belt): 800 mm Weight: 16 t Pit Dimensions: 10,000 x 3,200 x 1,200 mm (L x W x D) Notes: The baler is currently in operation and is scheduled to be replaced by a new machine in Q2 2026. Inspection by appointment is possible. No liability is assumed for technical data or possible errors.

Sąlyga: labai geros būklės (naudotas), Nuolatinio veikimo horizontalioji presas, skirta suspausti ir pakuoti tokioms medžiagoms kaip kartonas, popierius, plastikai ir kt. Gamintojas IMABE IBERICA, slėgis 125 t, įkrovimo angos dydis 1800 x 1000 mm, suspaudimo vežimėlio viršuje įtaisyti peiliai, leidžiantys apipjauti medžiagos perteklių virš kompaktavimo tunelio. Atlenkiamas kompakavimo tunelis viršuje ir šonuose, užtikrinantis geresnį medžiagos sulaikymą; balų išleidimo anga 1050 x 1100 mm, ilgis reguliuojamas. Automatinė, šoninė penkių vielų surišimo sistema, aukštam našumui 30–35 t/val. Pilnai atrestauruota ir peržiūrėta 2019 m. Kdodpfxov U R Ags Af Iog

Sąlyga: geras (naudotas), Gamybos metai: 2018, veikimo valandos: 40 350 h, Funkcionalumas: visiškai funkcionalus, Baler Presona LP 85 VH2 with cross-tying, year of manufacture 2018 Technical Data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1200 cbm/h Output at 30-100 kg/cbm: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2000 L Transport dimensions (press): 10400 x 2400 x 2800 mm (LxWxH) Weight: approx. 27,000 kg The press was dismantled from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data are based on information provided by the manufacturer. We accept no liability for the information given or for any possible errors. Kedpfxjx Irigo Af Iodg This offer is subject to change, prior sale reserved, and may be revoked at any time. Viewing is possible by prior arrangement. Sale is ex-works, payment in advance, without warranty or guarantee.