Ritinių lenkimo staklės - 3 ritinėliai

OSTAS 1070 x 130 OMR-S

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox Rbsdpfx Ahsd Ab H He Hjt • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Gamybos metai: 2003, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBUT136, ! Bargain Price ! Price from €1,150 R.Stahl Single-Girder Suspended Crane | Bridge Crane | Crane Runway | Indoor Crane | Gantry Crane Load Capacity: 250 kg 7 cranes available: Rbjdeigl R Repfx Ah Hot 4: Steel Suspension Crane, 250 kg capacity, width 6.35 m, gauge 5.6 m 5: Steel Suspension Crane, 250 kg capacity, width 2.65 m, gauge 1.9 m 6: Steel Suspension Crane, 250 kg capacity, width 4.85 m, gauge 4.35 m 7: Steel Suspension Crane, 250 kg capacity, width 2.90 m, gauge 2.35 m 9: Steel Suspension Crane, 250 kg capacity, width 6.0 m, gauge 5.5 m 10: Steel Suspension Crane, 250 kg capacity, width 1.03 m, gauge 0.74 m (1,150 Euro) 11: Steel Suspension Crane, 250 kg capacity, width 1.65 m, gauge 1.25 m Gauge can be adjusted, end carriages are bolted with 8 bolts. Runway rails (IPE 200 – not available) Trolleys are adjustable to fit the girder dimensions. Including complete control system, pendant control via pushbutton station. All cranes are fully electrically traversable in all 3 axes Lifting height/hook travel approx. 4 m Connection: 400V 16A, Year of manufacture: 2003 Very good condition, systems were only used for maintenance – hardly used Shipping by freight forwarding, collection preferred Location: 75053 Gondelsheim Please inquire for shipping costs by postcode – we will provide you with a prompt, non-binding offer!

Sąlyga: naujas, Sheet width 2050 mm Sheet thickness 3 mm Frame width 2100 mm Back gauge - adjustable 600 mm Connected load kW Machine weight approx. 1.1 t Dimensions L x W x H 2.7 x 2.1 x 1.4 m The machine operates quietly and is energy-efficient thanks to its geared motor with brake system. Our machine is welded as a monoblock body from ST42 quality material. The machine's blades are made of 2379 quality steel, brand name BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger guard are part of the standard equipment. (Documentation only available in English) Redpfxjfv H Dkj Ah Hsbt

Sąlyga: naujas, Gamybos metai: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 660x1250 mm Rbodpfx Ashgihkoh Het Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke. - NC control system. - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design enables rapid tool changes without loss of accuracy. - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high loads. - The universal tool holder with various tools allows for highly flexible operation.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Technical Data: Rsdpfx Ajw An Uhsh Hebt Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical top roll: 70 - 185 mm Diameter of side and central lower rolls: 105 mm Conical bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very little used, as new condition The seller does not assume liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 0000, Pasiūlymas – kapitališkai suremontuotos FAT tekinimo staklės gamykliniuose matmenyse, FAT šlifuoti kreipiančiosios, nauja elektros instaliacija ir kt. TUR 630 M x 2000 arba TUR 630 M x 3000 TUR 630A x 3000 arba TUR 630A x 4000 su 140 mm veleno kiauryme ir 2 vnt. 400 mm Bison griebtuvais Pristatymas: 3–4 mėnesiai nuo užsakymo Priedai pagal kliento pageidavimą NAUJŲ BISON GRIEBTUVŲ SĄRAŠAS Griebtuvai originaliose medinėse dėžėse ===== 1 x 4344-630-8 1 x 4344-315-11 1 x 4334-630-8 1 x 4334-500-6 1 x 3204-160 1 x 4305-800 (ŽIOBOS) 1 x 3244-400-8 1 x 3544-400-11 3 x 4344-400-6 1 x 3704-250-6 1 x 4344-250-6 1 x 3514-250-6 1 x 3744-400-11 1 x 3704-400 Rbodpfxenqzaie Ah Hot 1 x 3544-400-8 1 x 3245-400-8 2 x 4334-400-8 2 x 4344-400-8 1 x 3434-315-8 1 x 4344-200-6 1 x 3704-315 1 x 4344-250-8 1 x 3204-200 1 x 3234-200-5 Visada pasitikrinkite ar likutis vis dar yra! Pristatymas: EXW – NL

Sąlyga: naujas, Matmenys (I x P x A): 1.630 x 700 x 1.200 mm Svoris apie: 480 kg Bendra galingumo poreikis: 1,1 kW Lenkimas: 2 Lakšto storis: 3 mm Lakšto ilgis: 1050 mm Techniniai duomenys Lakštų valcavimo staklės Volelio skersmuo: 90 mm Valcavimo greitis: 6 m/min. Rsdpfsd Eqqqsx Ah Hebt • asimetrinis volelių išdėstymas • 2 volai varomi stabdžio varikliu • Galinio volelio nustatymas su rankenėle • Išskleidžiamas viršutinis volelis • Kūginio valcavimo įtaisas • Dvigubas pakojų jungiklis dešinės/kairės eigai • Apatinis ir galinis volai su vielos grioveliais • Veikimo instrukcija VOKIEČIŲ kalba PAPILDOMAI: grūdinti volai – 900 EUR

Sąlyga: naudotas, Gamybos metai: 1986, Sheet thickness: 6.0 mm Pressure: 18 t Redpfx Ahjg Ip Efe Hsbt Shearing angle – upper blade: 90° Blade length: 225 x 225 mm Operating voltage: 380 V Total power requirement: 5.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Sąlyga: naudotas, Gamybos metai: 1980, PIPE BENDING MACHINE LANG Rodpfx Asrq D N Rsh Hobt TYPE EL90 Ø 90

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Rsdpfx Ahsd Ev Ups Hjbt Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210