Faneros presas

ORMAMACCHINE P25/2

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D12L/8288, Pasiūlymo numeris: D12L/8288 Mašinos tipas: Vielinių vinių presas Gamintojas: WAFIOS Tipas: N90 Gbodpfxowi Uc Ee Abbsi Pagaminimo metai: 2005 Skersmens diapazonas: 2,0-4,0 mm Vinies ilgiai: 50-100 mm Našumas – vnt./min.: 800 Vieta: Mūsų sandėlyje

Būklė: geras (naudotas), Gamybos metai: 1989, Pressing area: 2550 x 1350 mm Number of pressing cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic Heated Platen Press Under-piston design Electric heating platens Press pressure infinitely adjustable via pressure switch device Hydraulic pump Central control panel with all controls Digital temperature display for both heating platens Press cycle counter Safety ripcord Rack compensation Main switch Used Machinery Notice: Gedpfx Abowd N Rmsbjbi • Technical data may be subject to errors and prior sale. • Prices quoted are ex-works - free loading! • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty claims whatsoever. Buyers have the opportunity to inspect the machines on site. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Būklė: labai geros būklės (naudotas), Gold-anodized plates Gbedpfju I N D Hsx Abbei Working dimensions: 2.5 × 1.1 m Electric heating Fully functional, tested You can call or write to us. We can communicate in German and Russian, both spoken and written. You may also send messages in English. 31.3.5

Būklė: labai geros būklės (naudotas), Katalogo numeris 6726 TECHNINIAI DUOMENYS - Pakrovimo bunkerio įvadas: 280x300 mm - Susmulkintos medienos išvadas: Ø 310 mm - Rotoriaus darbinis plotis: 340 mm - Pagrindinis variklis: 22 kW - Peilių kiekis: 6 vnt. - Matmenys (I/P/A): 1300x1150x1680 mm - Svoris: 720 kg PRIVALUMAI – Labai gera būklė – Naudotas smulkintuvas Grynoji kaina: 19 900 PLN Grynoji kaina: 4 740 EUR Kaina apskaičiuota pagal 4,2 PLN/EUR kursą (esant didesniems kursų svyravimams kaina gali keistis) Gjdpsignt Usfx Abbobi

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, commonly referred to as a panel saw with scorer. This is an ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials. Construction and Design: The Cormak MJ45-KB4 is a robust woodworking machine featuring a durable steel frame, ensuring stability during operation. The large work table, guided on hardened steel rods and offering a carriage length of 3200 mm, with integrated cutting units, guarantees both efficiency and accuracy. Gsdpfx Abjtz Smiebjbi Main Cutting Unit: Scoring Unit: A key feature of this saw is the scoring blade, which relieves internal stresses in the wood by scoring the underside of the workpiece. This reduces the risk of cracking and deformation after cutting. The 0.75 kW scoring motor ensures reliable scoring operations. Main Saw Blade: The Cormak MJ45-KB4 is equipped with a circular saw blade as the main cutting tool. The electric motor drives the saw blade, enabling precision cutting. With a blade diameter of 350 mm, the maximum cutting height is up to 105 mm. Manual Scoring Adjustment: Easy and effective manual scoring adjustment allows for quick and precise tool settings. Adjustable stops make it easy to return to previous settings, and the intuitive control location at the operator’s workstation allows adjustments without work interruption. Features and Advantages of the Panel Saw: - Large working area: The panel saw has a spacious working surface, facilitating handling of large material sheets. - Smooth feed: The feed system utilizes precision-hardened steel guides and ball bearings, which ease longitudinal cutting of long panels or plywood sheets. - Angle and cutting depth adjustment: Adjustable angle and cutting depth enable the tool to be tailored to specific project requirements. - Safety features: The panel saw is equipped with safety devices, including blade guards and emergency stop systems to ensure safe operation. Applications of Panel Saws with Scoring Unit: Panel saws with a scoring unit are mainly used in the woodworking and window manufacturing industries for cutting wood and wood-based materials. They are ideal for cutting boards, chipboard, MDF panels, and similar materials. The Cormak MJ45-KB4 is a professional tool distinguished by high precision. Technical Specifications Table dimensions: 990 x 575 mm Sliding table length: 3200 mm Cutting width with rip fence: 1250 mm Crosscut with crosscut fence: 3100 mm Blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Main blade bore: Ø30 mm Blade height: 0-105 mm Blade height at 45°: 0-73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring spindle speed: 8000 rpm Main motor power S1/S6: 5.5 kW / 9 HP Scoring motor power S1/S6: 0.75 kW / 1.2 HP Dust extraction port under table: 100 mm Dust extraction port at blade guard: 80 mm Machine weight: 680 kg Saw delivered without saw blades. Price not valid for machines sold in Poland.

Būklė: naudotas, Gamybos metai: 1990, No. 04502 Veneer Press Ott JU 2511/70 Used, Year of manufacture: 1990 Gbjdpfx Abexwp S Iobei Electrohydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm (L x W) Electric heating 4 hydraulic cylinders, each with 80 mm diameter Total pressing force: 70 tons Specific pressing pressure: 2.5 - 3.5 kg/cm² Opening width: 400 mm Push-button control for open – close – stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Emergency stop safety pull cord Includes electric cable and 32 A connector Includes electrical diagrams, operating manual as PDF file Transport dimensions approx. 2900 x 1400 x 2000 mm (L x W x H) Weight approx. 3000 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale as-is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, with no guarantee Subject to prior sale No warranty applies to used machines. Sale is 'as seen'. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex works

Būklė: naudotas, Naudota mašina Įranga ir techniniai duomenys: - Spaudimo plotas: 2 200 × 1 100 mm Gsdpfowpm I Hex Abbebi - Cilindrų skaičius: 4 - Didžiausias spaudimo slėgis: 60 t - Konstrukcija: 1 aukšto - Kaitinimo plokštės: auksu anoduotos ELKOM energiją taupančios plokštės - Atidarymo aukštis: 350 mm - Pajungimo galia: 14 kW - Stūmoklio skersmuo: 80 mm - Darbinis slėgis: 365 bar Matmenys: 2 600 mm × 1 250 mm × 1 750 mm Prieinamumas: iš karto Vieta: Röllbach

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, * Wemhöner Basic 1000 Plus - pagaminta 2008 m. - labai gera būklė, mažai naudota * Tipas KT-MB-28/15-240 * su automatine kaiščių sistema ir Inline tipo apverčiamuoju įrenginiu Gjdjxbcudepfx Abbjbi * 2 stalai su automatine Vario-kaiščių sistema * su teflonine danga, skirta iš anksto klijuotai plėvelei * plėvelės klojimo sistema stalui (iš anksto klijuota plėvelė) * Kaitinimo plokštės dydis: 2800 x 1500 mm * Maksimalus ruošinio dydis: 2 540 x 1 250 mm * Membrana: yra * Pjovimo stotelė * Plėvelių sandėliavimo paternosteris, 3,2 m aukščio su 14 pakabinamų strypų * PLC valdymas Siemens S7 * Valdymo pultas SIEMENS TP 270 (liečiamas ekranas) SPS valdymui * Automatinis membranos įtempimas * Įdiegta elektros galia 38,5 kW * Didžiausias kameros slėgis 6 bar * Didžiausias presavimo angos atsidarymas 150 mm * 6 cilindrai, Ø 125 mm * Darbinė įtampa 400V 50/60Hz * Presavimo kameros aukštis 40/60 mm * Maksimalus presavimo slėgis 2 400 kN * Hidraulinės sistemos darbinis slėgis 320 bar

Būklė: naudotas, Gamybos metai: 2014, Naudota mašina Pagaminimo metai: 2014 Įranga ir techniniai duomenys: - Darbinis plotas X: 3 740 mm - Darbinis plotas Y: 1 570 mm - Darbinis plotas Z: 350 mm - 4-a ašis: yra - 5-a ašis: 5 ašių verpstė, variklis 12 kW - Su papildomu C ašies užraktu - Įrankių keitimo vietos: 24 su lėkšteliniu keitikliu; 10 mašinos stovo kairėje pusėje - Vertikalios gręžimo verpstės: 12 - Mašinos stalas: konsolinis stalas - Stalo pozicionavimo automatas: yra - 6 ruošinio atramos tipo e-motion - Speciali ruošinio prispaudimo sistema rėmams - Programinė įranga: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 apdirbimo laukai svyruojančiam užkrovimui - Su automatine centrine tepimo sistema Gbodpfx Ajx Hllxobbei - Su mobiliu valdymo pultu su PC monitoriumi - Su valdymo spintos kondicionieriumi - Su vakuuminiu siurbliu 90 m³/h - Su rankiniu valdymo įrenginiu - Įskaičiuota: 12 rėmo spaustuvų, 8 dideli ir 4 vidutiniai siurbtukai Prieinamumas: greitas Vieta: Röllbach

Būklė: naujas, Working length: 2451 mm Working width: 2170 mm Working height: 800–1000 mm Haberkorn Return Conveyor approx. 2,451 mm x 2,170 mm ----- Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800mm – 1000mm) - Conveyor system for timber lengths from 300mm to 4200mm - Conveyor system for timber widths up to 240mm Gjdpfx Aboi Hmpijbjbi Infeed Roller Conveyor - Infinitely variable driven roller conveyor, approx. 5 – 25m/min - Drive via geared motor 0.37kW, line shaft and PU round belts - Roller diameter 50mm, 240mm roller shell length, PVC coated - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers compliant with HBG Cross Conveyor - Cross conveyor with 6 traverses - PVC-coated (green) conveyor belts, 50mm wide, guided in plastic tracks - Infinitely variable driven cross conveyor approx. 5 – 20m/min - Drive via geared motor 0.37kW - Approx. 1750mm from stop to stop Outfeed Roller Conveyor - Infinitely variable driven roller conveyor, approx. 5 – 25m/min - Drive via geared motor 0.37kW, line shaft and PU round belts - Roller diameter 50mm, 240mm roller shell length, PVC coated - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers compliant with HBG ----- Conveyor Belt approx. 320mm x 3500mm Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800mm – 1000mm) - Conveyor belt for timber lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on braked castors Belt - Infinitely variable drive approx. 5 – 25m/min - Drive via geared motor 0.37kW - PVC-coated belt, 260mm wide - Stops on both sides, approx. 15mm ----- Control System: - Ready-to-plug with integrated control and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop circuit - Fully installed with 16A Europlug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatics: 6–8 bar, consumption approx. 16NL/min Color: RAL 7035 light grey Essential EU Directives: 2006/42/EC in compliance with 2006/95/EC Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price for the above version ex works: on request! Plus packaging and shipping costs ----- (Technical data according to manufacturer, subject to change without notice!)