Dvigubo stiklo karoliukų pjūklas

OMGA TRF 527 VIS CE

Sąlyga: naudotas, Gamybos metai: 2023, The machine is available for demonstration at our warehouse in Blomberg. Equipped with 1 HD pump Binks Maple 8/25 up to 175 bar and 4 units of Sames-Kremlin AVX Airmix spray guns. The machine features a changeover valve for rapid color changes, a lever switchable for up to 3 color circuits, and 1 cleaning agent pump (options available). The machine is supplied in ATEX (explosion-proof) specification. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width: 1,200 mm (1,300 mm) - Spray gun drive: single version - Dry extraction Pgjdpfx Aoumvnhefwow - Belt conveyor system - Continuously variable feed speed: 2–8 m/min - With paint recovery system - Gun control: PLC, LS - Installed color circuits: 3 - Number of installed spray guns: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pumps manufacturer: Binks Maple 8/25, up to max. 175 bar - Including supply air filter ceiling - Suitable for both water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Voltage/Frequency: 400 V / 50 Hz - Color: RAL 7035, light grey - Weight: 3,100 kg _____ Optionally, we can also offer installation and commissioning of the system, as well as operator training for your staff. On request, we also provide regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Sąlyga: naujas, Gamybos metai: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Pgodpfxoizkhvj Afwow Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Sąlyga: geras (naudotas), Gamybos metai: 2009, Production line for windows Weinig Conturex C 114, year of construction 2009. Working width: 25-260 mm, working height: 25-110 mm, PowerGrip table length: 4 x 2280 mm, workpiece length: 200-6000 mm. Pedpfxouzu Tyo Afwjgw

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2018, Double Arbor Multiblade Saw model SQUALO 420 2x75kW – Completely Refurbished with Warranty – €65,000.00 Podpfx Ashrdxiofwegw Year 2018 Technical Data Sheet Infeed roller width: 420 mm Outfeed roller width: 520 mm Maximum saw unit width: 400 mm Maximum cutting height: 200 mm Minimum working length: 800 mm Maximum passage width: 700 mm Saw shaft diameter: 60 mm Maximum circular blade diameter: 370 mm Blade bore diameter: 80 mm Saw shaft speed: 3,800 rpm Feed speed by rollers: 4–36 m/min Weight: 5,500 – 6,000 kg Overall dimensions: 2500 x 2260 x 2000h mm

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2,500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125 - 145 mm Tool circle diameter with rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital readout for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Pgedpfewzmu Rex Afwjw Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Tool circle diameter for straight knife cutterheads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC-controlled Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded. Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment range of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account. Mach...

Sąlyga: naujas, Įranga: apšvietimas, Take your painting process to the next level – with mobile convenience. Mobile spray booths in container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up at different job sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent the escape of paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Mobile spray booths are a practical and flexible solution for companies that require a relocatable and effective painting system that can be transported from one job site to another. Overview of design and features Our mobile 20-foot Sapi spray containers are made with a robust steel frame and welded wall and ceiling panels. Inside, we can add special aids such as cranes or lifting devices. The floor is constructed from checker plate. Both doors feature ventilation grilles fitted with fine-pore filter mats. For safety, one door is designed as an emergency exit and includes a viewing window. It is important to note that these are not simply converted shipping containers! We manufacture all of our containers from the ground up ourselves. We use only the most durable materials that meet all requirements and have been safety tested and proven. Standard shipping containers would not meet the required safety standards. Paint extraction system in the mobile spray container The paint mist extraction wall for overspray separation is positioned in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, folded with baffles, including various suspension and fastening elements for filter mounting. The powerful and EX-protected extraction fan with drive motor is installed on a console on the outside of the rear wall of the container. Next-generation mobile spray booths: Meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must comply with the highest EU standards. The introduction of new paint systems such as water-based coatings, polyurethane resins, epoxy zinc dust paints or epoxy iron mica coatings imposes stricter requirements on existing spray booths. This is why we have developed a new and unique mobile spray booth for the next generation of coating solutions. Pjdsun Shgopfx Afwogw An important criterion is the transport of workpieces for painting and further processing steps. Do you need more information? Our engineers can provide expert advice and support. Whether you require dry or wet overspray separation, air humidification or air drying, low-temperature condensation drying or hot air drying, or pretreatment of workpieces by high-pressure washing with a recirculating water system, compressed air blasting, or centrifugal wheel blasting technology.

Sąlyga: naudotas, Gamybos metai: 2012, bendras plotis: 1 750 mm, bendras ilgis: 1 800 mm, bendras aukštis: 1 600 mm, Svoris: 1.900 kg Kaina: pagal užklausimą - Pagaminimo metai: 2012 - Dokumentacija prieinama: Taip - CE žymėjimas yra: Taip - CE sertifikatas yra: Ne - Serijos numeris: 12236 - Pjūklo disko skylės skersmuo [mm]: 650 - Transporterinės juostos variklio galia [kW]: 0,8 - Transporterinės juostos plotis [mm]: 350 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 80 - Saugiklis [A]: 100 Pedpewniidefx Afwsgw - Galia [kW]: 57,0 - Transportavimo matmenys: 1800mm x 1750mm x 1600mm (I x P x A) - Transportavimo svoris [kg]: 1900kg - Transporto paketai [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir priėmimas mainais galimi bet kuriam pramonės sektoriui Yorick Diebels

Sąlyga: naudotas, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Podjvu Hghepfx Afwogw Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Sąlyga: naujas, Step-by-Step Painting Systems Elboy Industrial Solutions designs and manufactures a wide range of paint shops tailored to your product requirements. With ELBOY, you can navigate your facility in virtual reality during the design phase, allowing you to make desired modifications before final construction, thereby avoiding unexpected outcomes. Pjdpfxedy Dw Aj Afwjgw We provide design and manufacturing services for your application, with a focus on environmental protection and occupational safety for processes such as sandblasting, filling, washing, priming, and top coating - suitable for all product sizes. Step-by-Step systems are equipped with overhead or floor conveyors and can be configured for products of all dimensions. Cabins for sandblasting, chemical washing, pre-coating, drying, filling, top coating, and curing can be seamlessly integrated into the system. Each process step, predefined by the system, is executed in sequence: once the set time elapses, automatic doors open and the product moves automatically to the next processing line. These fully automated systems are managed via a 15-inch touchscreen, offering various reporting options such as main computer monitoring, product reporting, and outcome reporting as needed, including remote control capability. These paint shops are designed and built by our engineers in close alignment with your capacity, application areas, and specific requirements. For applications involving electrostatic powder coating or wet painting, sandblasting, coating, washing, and similar system needs, we aim for maximum efficiency with minimal manpower and space requirements.

Sąlyga: naudotas, Planer and profiling moulder WEINIG Profimat 26 Super Working width: 20 – 230 mm (260 mm) Working height: 8 – 120 mm (140 mm) 5 working spindles, spindle diameter 40 mm Long infeed table (approx. 2000 mm) Bottom spindle 4 kW / Left & right 7.5 kW / Top 5.5 kW / Bottom finishing 5.5 kW Pneumatic pressure for feed rollers Stepless cardan feed 5 – 24 m/min Feed roller before jointer Control via push button panel Automatic lubrication pump Mechanical digital readouts Machine in CE-compliant version Year of manufacture: 2001 Without machining tools Machine is WORKSHOP OVERHAULED and in GOOD CONDITION Pgjdewqda Nopfx Afwew Machine is connected and ready for demonstration in the exhibition center Ex stock Lieboch