OMC EN 105 Loginis valdymas 30/13

OMC PL 105 Logic Control 30/13

Būklė: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Nlsdogtm U Ajpfx Acpea Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Nodelht Hzjpfx Acpjla Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Būklė: labai geros būklės (naudotas), Maggi Boring System 35 Multi-Spindle Boring Machine Number of spindles: 35 Centre distance between spindles: 32 mm Distance between first and last spindle: 1,088 mm Maximum drilling depth: 85 mm Spindle speed: 2,800 rpm Number of pneumatic clamps: 4 Operating pressure: 6–8 bar Nodpfjvx Aqdsx Acpela Air consumption per cycle: 15 l Number of motors: 2 × 1.5 kW Weight: 450 kg CE certificate

Būklė: naujas, Gamybos metai: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Corner rounding unit, radius R = 2 mm Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Nledjg Tu Rkepfx Acpja Equipment for short workpieces

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 5 383 h, HOMAG DRILLTEQ V-200 yra kompaktiškas ir itin efektyvus vertikalus CNC apdirbimo centras, skirtas tiksliems gręžimo, įpjovimo ir frezavimo darbams baldų ir spintų gamyboje. Dėl vertikalaus apdirbimo staklėms reikia minimalios grindų vietos, o jos užtikrina didelį lankstumą ir produktyvumą. Puikiai tinka tiek pavieniams, tiek serijiniams užsakymams gaminti. Nedpfxjym Ny Ss Acpela Įrenginys yra labai geros techninės būklės, galima apžiūrėti veikiantį.

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 – 1250 mm Width: 100 – 800 mm Thickness: 10 – 60 mm Active center stop: Max. length 600 mm Configuration: Nodpfoxdl Rajx Acpela - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (32 mm from the first drilling spindle) - Glue nozzle with adjustable glue volume - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Robust steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable - Central lubrication power control PC85T Modern control system based on Windows PC

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 7 kW (9,52 AG), pjūklo disko skersmuo: 305 mm, bendras ilgis: 3 100 mm, bendras plotis: 3 100 mm, bendras svoris: 3 000 kg, pjovimo ilgis (maks.): 3 100 mm, pjovimo aukštis su įrėžėju (maks.): 70 mm, X ašies padavimo greitis: 40 m/min, padavimo greitis Z ašis: 50 m/min, vietos reikalavimas ilgis: 3 100 mm, reikalingas plotis: 3 100 mm, Įranga: dozatorius, sūkių greitis be galo kintamas, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture manufacturing, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Technical Main Data & Equipment: Longitudinal saw FM 20-3100 with hardened guides Automatic forward and return stroke of the saw unit (return stroke automatically lowered) Feed drive via three-phase geared motor, frequency inverter-controlled Feed speed: 2 – 40 m/min (infinitely variable) Return speed (rapid traverse): 50 m/min Extraction channels in machine base & pressure beam Score saw adjustable externally (without opening the hood) Protective hood interlock with lamella curtain SZ 5008 3-stage cutting height adjustment LA 4143 6 recesses in the pressure beam for offcuts up to 5 mm Saw motor: 7.0 kW | Scorer motor: 1.1 kW (can be switched off) Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: Angle pressure device WP 5003 with hold-down claw for crosscuts Adjustment range: 2400 mm Fully automatic control via DNC-AT Material infeed table HP 5091 2 top-mounted guides, rack-and-pinion guide Servo drive material pusher Feed speed: 25 m/min (safety limited) Return: 40 m/min 6 clamping fingers, 4 double roller tracks Table length: 3100 mm | Gauge depth: 3150 mm Closed Pertinax surface in the angle stop area Control & Operation: Operating system: Ubuntu Linux Integrated PC with hard drive, parallel & serial interface Network capable (LAN/WLAN), remote maintenance via Internet (TeamViewer, Remote Desktop) USB print function Multilingual dialog programming 15" flat screen, multifunction keyboard in swiveling control panel Graphical display of cutting patterns and processes Software / Programs: OPTIMAX: Office optimization, offcut calculation, material requirements OPTIMIN: Direct optimization at the machine PC with parts list entry Processing via USB, floppy disk, or online (optional) Manual, automatic, & special operating modes (e.g., grooving, veneered parts) Additional Equipment: Angle stop table HP 5085: 1,720 x 800 mm | Pertinax overlay Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay Air cushion system LK 5030 integrated in both tables Circular saw blade KSB 4005: Ø 305 mm, Z = 60 Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is used worldwide – even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g., Thailand): the PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and endurance. Warranty: We are so confident in the quality and durability of our machines that we offer a 7-year warranty on the machine construction and guideways. (Excludes electrical supply parts and wear parts.) Nledpfjwrn Efjx Acpsa 📞 Contact us for a customized quote or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Z1-axis speed: 50 m/min Z2-axis speed: 27 m/min Nodoh E Sghjpfx Acpela Spindle speed: 18,000 rpm Dismantled - available immediately

Būklė: naujas, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Sliding table: 3200 x 400 mm Cutting length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Outrigger table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor input S6 40%: 7.5 kW (10.0 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight approx.: 850 kg Scope of Delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Length stop flaps • Outrigger table with roller • Push stick • Independently driven scoring unit • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double roller carriage with central and end position lock for precise cuts Nlodpfx Asd N S T Djcpea • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Outrigger table with roller for easier handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Supplied as standard with separately driven scoring unit (motor power 0.75 kW) • Robust saw unit with double-sided pivot elements made of cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the outrigger table, infinitely adjustable from 90° to 45°

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.4 / 3 Edge thickness for solid strips/slats (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Top pressure driven by V-belt (C.N.) Sprayer unit (for liquid anti-adhesive) AAR Adjustable fence, CNC-controlled "EASY SIZE PLUS" Jointing cutter unit 2 x kW Infrared heating for workpiece edge Gluing unit (P.U.R. glue + premelter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (CNC-controlled) Nlodpfx Acoxlqntjpja Edge magazine for rolls - 1 End trimming unit K/SEL Premilling unit RS/K Milling unit RI / 800 (3 positions) Multi-function unit (radius/profile milling) "4 EDGE" KIT Spraying units (for sliding liquid) Profile scraper unit RAS/1000 Flat scraper unit RCA / 2C Universal milling unit for grooving/rebating and profiling K-100 (1 x kW 1.8) 90° Hot air blower - edge finisher Return direction "SAG" Mod. SPINNER 47 / 63