Cilindrinio šlifavimo staklės be centro

Nomoco M40

Būklė: naudotas, TECHNICAL DATA - Distance between centres: 650 [mm] - Centre height: 175 [mm] - Max. workpiece weight between centres: 80 [kg] - Travel X/Z axis: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swivel range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Minimum resolution: 2.5 [degrees] - Internal grinding speed: 40,000 [rpm] - Power: 3 [kW] WORKHEAD - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore diameter: 30 [mm] - Minimum C-axis resolution: +/- 0.5 [degrees] TAILSTOCK - Taper type: MT4 - Quill diameter: 50 [mm] - Quill stroke: 35 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 20 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] Credpfx Asylc R Uof Asb MACHINE HOURS - Power-on hours: 190 [h] EQUIPMENT - Control: FANUC Oi-TD - Electronic handwheel - 3-color status lamp - Oil mist extraction system - Direct position measuring systems axes: X / Z - Dynamic grinding wheel balancing: MPM - Automatic touch detection: SENSITRON 6 - Fixed dressing device - Workpiece probe system - Coolant tank: 375 [l] * with paper filter

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Credpfx Afjpugwis Ajb A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications Crodpfx Asrqwbief Asb • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm

Būklė: naudotas, Manufacturer: CINCINNATI Cjdpfx Aewrpyksf Asrb

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Credpfx Aet Hw N Hjf Aob Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Gamintojas: MAZAK Tipas: INTEGREX 300-4ST Metai: 2008 Codpfx Afeyh I Tds Ajrb Valdymas: Mazatrol Matrix Mašinos svoris apie: 13 900 kg Įrankio laikiklis: Capto C6 X eiga: 530 mm Y eiga: 200 mm Z eiga: 1 065 mm Sūkiai: 4 000 aps./min. Sukimo skersmuo: 300 mm Sukimo ilgis: 1 000 mm Užimamas plotas apie: 6 500 × 3 000 × 3 200 mm Įrankių bokštelis - vietos: 80 vnt.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, MORI SEIKI SL-600B/2000 CNC TEKINIMO STAKLĖS Kategorija: CNC tekinimo centrai Nuorodos nr.: 400212 Apdirbimo pajėgumas: Ø900 x 2000 mm Pagaminimo metai: 1999 Techninės specifikacijos: CNC Valdymas: Fanuc 18iT DARBO PAJĖGUMAS Didžiausias tekinimo skersmuo: 900 mm Didžiausias tekinimo ilgis: 2000 mm Didžiausias ruošinio sūpavimas virš lovos: 994 mm Atstumas tarp centrų: 2300 mm Didžiausias ruošinio sūpavimas virš skersinio stalo: 733 mm Ašies (X) eiga: 485 mm (440 + 45) mm Ašies (Z) eiga: 2150 mm Crsdpfxjx Nv Sho Af Aeb REVOLVERINĖ GALVA Revolverinė galva: 12 pozicijų Kvadratinio įrankio kotelio dydis: 32 mm Gręžimo juostos kotelio skersmuo: 65 mm GALINIS CENTRAS Galinis centras: MT5 Gal. centro slankiklio eiga: 150 mm Gal. centro slankiklio skersmuo: 150 mm VERPTUVAS Didžiausias apsisukimų skaičius: 1500 aps./min. Pagrindinio verpstės priekinis tvirtinimas: JIS A2-15 Pagrindinės verpstės skylė: 185 mm Verptuvės tipas: 3 pavarų dėžė Verptuvės guolio vidinis skersmuo: 260 mm STAKLIŲ MATMENYS Svoris: 16 t Papildoma informacija: Visos techninės specifikacijos paimtos iš interneto, todėl pirkėjas turi jas papildomai patikrinti.

Būklė: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 53 776 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 380 mm, sukamosios stalo skersmuo: 500 mm, sukimosi greitis (maks.): 18 000 aps./min, For sale: 5-axis simultaneous milling machine by Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical data: Crjdpfxowxd Age Af Ajb Year of manufacture: 2000 Control system: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 380 mm B-axis: 0–180° C-axis: 360° Clamping table diameter: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. spindle speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 stations Dimensions (LxWxH): approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be organized Europe-wide for an additional charge, upon request. All prices exclude VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machine Purchase/Sales BUYING & SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 1998, Mit der Hand gezeigte Teile sind nicht im Lieferumfang enthalten. Die technischen Daten sind auf dem Bild dargestellt. Codpfxowb Aqns Af Asrb

Gamybos metai: 1992, būklė: naudotas, Grinding height 50 mm Crodet Hw Naopfx Af Aeb Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Grinding height: approx. 1.5 – 50 mm Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.