Centrinė tekinimo ir veleno tekinimo staklės

Nardini MS 175 E

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 3 ašių skaitmeninis ekranas Bendras atstumas tarp centrų: 800 mm Aukštis virš staklių lovos: 175 mm Fpedpfx Asxyh D Usb Sob Veleno skylė: 46 mm 18 žingsnių sukamųjų greičių, diapazonas: 25 - 2000 aps./min Galia apie: 2,2 / 4,4 kW

Sąlyga: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment - Initial fill with quality oil - Operating tools Fsdpfx Abok Egrpe Sepb Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 360 mm, tekėjimo ilgis: 700 mm, bendras ilgis: 1 800 mm, bendras plotis: 900 mm, bendras aukštis: 1 600 mm, bendras svoris: 1 000 kg, centro aukštis virš viršutinio vežimo: 120 mm, NARDINI MS 175 E atraminė ir skersinė sriegimo tekinimo staklė TECHNINIAI DUOMENYS IR ĮRANGA: Fsdpfjw U Tr Ijx Ab Sepb Darbinė įtampa: 380 V Dažnis: 50 Hz Valdymo įtampa: 220 V Galia: 4,8 kW Špindelio pralaidumas: apie 48 mm Centrinis atstumas: apie 700 mm Centrinis aukštis virš lovio: apie 180 mm Maksimalus tekinimo skersmuo virš lovio: apie 360 mm Centrų aukštis virš atramos: 120 mm Maksimalus tekinimo skersmuo virš atramos: 240 mm Staklės komplektuojamos su griebtuvu, Multifix pjovimo laikikliu, greitai keičiamu griebtuvu, įvairiomis atramomis (lunetėmis) ir skaitmeniniu indikatoriumi NUORODOS NUMERIS 18 IŠMATAVIMAI IR SVORIS: 1800 x 900 x 1600 mm 1000 kg PASTABOS APIE ATSIĖMIMĄ: Prekė bus prieinama nuo 2025 m. rugsėjo mėn. tiksli atsiėmimo data turi būti suderinta nuo 2025-09-01 FCA: 73235 Weilheim an der Teck (DE), pakrauta ant sunkvežimio

Sąlyga: geras (naudotas), Gamybos metai: 1991, mašinos/transporto priemonės numeris: DO-JAO-011, Offer 24306 Technical Specifications: - Center height: 175 mm - Swing diameter: 330 mm - Distance between centers: 800 mm - Spindle mount according to DIN - Spindle bore: 46 mm - Tailstock quill taper: MT 3 - Tailstock quill travel: 120 mm - Spindle speeds: 6.3 – 2500 rpm - Longitudinal and face feeds - Drive: 400 V / 6 kW - Equipped with: - 3-jaw chuck - SWS tool post with 1 insert Fpsdjt H I Uyepfx Ab Sjb - Chip tray - Coolant system - Machine lighting - Required space: approx. W 1850 x H 1750 x D 990 mm - Weight: approx. 850 kg

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard Fedortd Uwopfx Ab Sspb - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Wire diameter: 0.1 – 1.3 mm Fpjdpfj Syv Tsx Ab Sjb Cut length: 5 – 70 mm Performance: up to 400 cycles/min Complete with cooling unit and motorized wire spool

Sąlyga: naujas, Gamybos metai: 2025, Centre height: 250 mm Spindle bore: 103 mm Distance between centres: 1000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Spindle speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Fpodpfx Aed I A Dhjb Sjb Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2500 x 1100 x 1380 mm

Sąlyga: naudotas, Gamybos metai: 1987, Sukimosi skersmuo virš lovos: 560 mm Sukimosi skersmuo virš atramos: 325 mm Fpsdpfxew Ny S Do Ab Seb Sukimosi ilgis: 1500 mm Veleno skylė: 62 mm Veleno sūkių diapazonas: 11,2 – 2240 aps./min Bendras galios poreikis: 9 kW Staklių svoris: apie 4 t Reikalinga vieta: apie 4 x 1,6 x 1,6 m Su Multifix įrankių laikikliu su 2 įdėklais, griebtuvu, besisukančia grąžtine ir skaitmeniniu indikatoriumi.

Sąlyga: naudotas, Gamybos metai: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Fpodpfx Ajvav Sdjb Sob Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m The lathe does not have a rapid traverse. Positioning over 2 axes Readout via Pinacho Lathe Controller Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Sąlyga: naujas, Bernardo Universal Lathe Master 360 Pro Centre Distance: 1000 mm Centre Height: 180 mm Swing over Bed: 360 mm Swing over Gap*: 502 mm Swing over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range (8): 70 - 2000 rpm Longitudinal Feed Range (32): 0.052 - 1.392 mm/rev Cross Feed Range (32): 0.014 - 0.380 mm/rev Metric Threads (26): 0.4 - 7.0 mm Imperial Threads (34): 4 - 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Stroke: 100 mm Tailstock Taper: MT 3 Rated Motor Power S1 100%: 1.5 kW (400 V) Motor Power Consumption S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg *Removable Gap Bed Length: 205 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. workpiece diameter 70 mm • Travelling steady rest – max. workpiece diameter 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 280 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE compliant) • Base with drawers Fedpfx Abed I H Ize Sopb • Operating tools