Sunkiosios serijos CNC tekinimo staklės su C ašimi

Nakamura SC-450

Sąlyga: naujas, Gamybos metai: 2025, Centre height: 250 mm Spindle bore: 103 mm Gcsdpfx Abjd I A Dhemsa Distance between centres: 1000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Spindle speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2500 x 1100 x 1380 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, ašies variklio galia: 15 000 W, veleno greitis (min.): 5 000 aps./min, X ašies eiga: 157 mm, Y ašies eiga: 35 mm, Z ašies eigos atstumas: 464 mm, sukimosi greitis (maks.): 6 000 aps./min, bendras aukštis: 1 885 mm, bendras ilgis: 3 675 mm, bendras plotis: 2 258 mm, bendras svoris: 9 000 kg, CNC Control: Fanuc 18i-TB Capabilities Travel X-axis mm: 157.5 Travel Y-axis mm: 35 Gedsxiwnnepfx Abmsca Travel Z-axis mm: 464.8 Travel B-axis mm: 600 C-Axis: 360º (0.001º increments) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle noses mm: 750 Bar work capacity mm: 52 Upper Turret Number of tool stations: 12 Max. speed driven tools rpm: 6,000 Driven tools power kW: 5.5 / 3.7 Number of upper turrets: 1 Lower Turret Number of tool stations: 12 Max. speed driven tools rpm: 6,000 Driven tools power kW: 5.5 / 3.7 Milling function: Both turrets Number of lower turrets: 1 Main Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 15 / 11 Sub Spindle Max. spindle speed rpm: 4,500 Spindle drive power kW: 11 / 7.5 Equipment Parts catcher Bar loader ILS – RBK Machine running time: Nominal kVA: 67.2 Base Machine: Dimensions / Weight Length mm: 3,675 Width mm: 2,258 Height mm: 1,885 Weight kg: 9,000

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 2 350 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized, CNC vertical machining center with a cast iron structure and roller-type linear guides for the table. Travels: X 1020 mm, Y 610 mm, Z 610 mm. Table size: 1200×600 mm with a maximum load capacity of 500 kg. Equipped with a continuous 4th axis TJR HR 255N rotary table, corresponding tailstock, and a milled table with T-slots. Spindle: ISO-40 (DIN 69871) at 10,000 rpm (max 18 kW), cooled by dedicated chiller, high-pressure through-spindle coolant, 30-position random tool changer with exchange arm, RENISHAW TS 27 tool presetting, wireless RENISHAW workpiece probe, and hinged belt chip conveyor. Godpfx Abjxf Nbromjca Year of manufacture: June 2017 (installed 2018), fitted with FANUC MILL I CNC with color LCD, Manual Guide i with remote handwheel, USB port, RS 232 serial, memory card slot, and FILTERMIST mist extractor for operational fumes. Machine is in PERFECT condition with only 2,350 cutting hours. Various additional equipment available upon request.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, General Tool magazine: 2x chain magazines with 32 stations each Rapid traverse in X/Y/Z: 48 m/min Travel paths X/Y/Z: 800/900/620 mm Spindle Technology: Direct drive Speed: 15,000 rpm Tool holder: HSK-A63 NC Rotary Table Technology: Swivel rotary table with torque drive, manufacturer Kessler A-axis: +/- 120° C-axis: 360° Clamping surface: ø800 mm Table load (max.): 1,000 kg Workpiece dimensions (max.): ø800 x 500 mm Equipment Linear measurement system: Direct (glass scales) in all axes Gcjdpfeur Ng Ujx Abmea Chip management: Chip conveyor Coolant management: ICS unit with filter and high pressure, 18 bar Workpiece measurement: Touch probe, Heidenhain TS 740 Tool measurement: Laser, BLUM Setup mode: Electronic handwheel Additional equipment: Spindle cooler

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 83040, Throat depth: 150 mm Test height: 200 mm Gjdpfxob Dkh Nj Abmoca Space requirement: 350 x 600 x 1410 mm

Gamybos metai: 2008, Sąlyga: labai geros būklės (naudotas), Max. bar diameter 65 mm Gedpein Hkmofx Abmoca Max. bar length 3000 mm

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 610 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 24 m/min, ruošinio svoris (maks.): 1 200 kg, bendras aukštis: 24 920 mm, bendras ilgis: 38 970 mm, bendras plotis: 30 700 mm, stalo plotis: 650 mm, stalo ilgis: 1 300 mm, veleno greitis (min.): 40 aps./min, veleno greitis (maks.): 8 000 aps./min, ašies variklio galia: 11 W, veleno nosis: Iso 40, įrankio ilgis: 250 mm, įrankio skersmuo: 75 mm, įrankio svoris: 7 g, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Vertical machining center "AWEA BM-1200II" equipped with FANUC 0i-MF Plus CNC Included accessories: - Prepared for rotary table installation - External air blast at the spindle - Left-side auger-type chip conveyors - Automatic high-pressure coolant system through the spindle at 20 bar Gcsdpfx Absrhi Rkemoa - Workpiece cleaning gun - Enclosure base wash-down system - 380-liter coolant collection tank - Three-color cycle end signal lamp - Full automatic shutdown

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 22 [mm] Gjdjw Ah R Nopfx Abmeca - Spindle speed: 10,000 [rpm] - Spindle power: 8.7/15 [kW] - Torque: 10/18 [Nm] - Number of counter spindles: 2 - Counter spindle speed: 10,000 [rpm] - Number of slides: 10 - Travel paths: X x Z = 62 x 85 [mm] - Number of slides for secondary machining: 2 - Stroke: X = 62 [mm] - Dimensions: 3330 x 1830 x 2860 [mm] - Weight: 5,700 [kg] - Connected load: 75 [kVA] - Production hours: 20,000 [h] EQUIPMENT - Siemens 840D SL CNC - 2 NCUs - TRANSMIT / TRACYL function - ARTIS - 2 additional electronic shaft preparations - 2 SCARA counter spindles - 2 parts collectors with conveyor belt - Bar remnant catcher - Index bar guide - Bar feeder interface - Fire protection system

Sąlyga: naudotas, Gamybos metai: 2003, Sukimos skersmuo 190 mm Sukimos ilgis 620 mm Valdymas Fanuc Series 18i-TB Bendras galingumo poreikis 15 kW Godpfx Ajxiy Aujbmeca Staklių svoris apie 13,5 t Užimamas plotas apie 5350x3350x2395 mm CNC tekinimo ir frezavimo centras NAKAMURA TOME Super NTJ Pagaminimo metai 2003 Valdymas Fanuc Series 18i-TB - Pagrindinis velenas turi būti kapitališkai remontuotas. - Viršutinė revolverinė galva modernizuota Turbo G42 oro pavara varomu velenu (60 000 aps./min) ir valdymo bloku GTR 3. Ašių kiekis: 9 Revolverinių galvų kiekis: 2 Maks. tekinimo skersmuo: 190 mm Maks. tekinimo ilgis: 620 mm Strypo pratekėjimas: iki 65 mm Maks. sukimosi skersmuo virš lovos: 190 mm Velenų kiekis: 2 (pagrindinis ir priešpriešinis) Veleno tvirtinimas: A2-6 Variklio galia: 15 kW Maks. apsukos: 60 000 aps./min X ašis: 345 mm Y ašis: +/- 45 mm Z ašis: 1240 mm B ašis: +/- 91° viršuje, pilnai servovaldoma, 0,001° Strypo pratekėjimas: D 65 mm - 12 padėčių revolverinė galva varomiems įrankiams - 24 padėčių revolverinė galva tekinimo įrankiams (dvigubų laikiklių technologija) - Su daugybe priedų - 2 x Hainbuch HB griebtuvai

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional model with quick-release saw blade system for professional users Item number: 5150063 DESCRIPTION Heavy-duty professional design with high net weight for maximum stability Exceptionally smooth and precise operation thanks to the torsion-resistant machine housing Large, one-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface Patented table tilt mechanism with handwheel and rack-and-pinion system Quick-release saw blade tensioning Precision saw blade roller guides Rapid and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch for automatic power-off when doors are opened Large cast parallel fence Supplied with miter gauge as standard Table tilt adjustment via rack-and-pinion system and handwheel TECHNICAL DATA Dimensions and Weights Length (Product) approx. 1190mm Width/Depth (Product) approx. 820mm Height (Product) approx. 2063mm Net weight approx. 377.7kg Extraction Connection Extraction port diameter: 2 x 120mm Work Table(s) Work table length: 830mm Work table width: 600mm Work table height: 830mm Work table tilt: 0 – 45° Explanation for work table tilt: For safety reasons, from an angle of 20°, a retaining device/stop must be fitted to prevent the wood from slipping! Electrical Data Supply voltage: 400V Network frequency: 50Hz Gjdpovk Sfbjfx Abmeca Output power: 4.1kW Cutting range Max. cutting height at 90°: 400mm Max. cutting width with fence: 570mm Max. cutting width without fence: 610mm Saw Blade Blade speed(s): 1615m/min Flywheel diameter: 630mm Blade length: 4600mm Blade guides: Precision guides above and below Location: in stock at 54634 Bitburg - immediately available -