Superapdailos mašina

Nagel SE01-50-SO

Gamybos metai: 2011, būklė: labai geros būklės (naudotas), Cloos welding robot Qirox QRC 320 incl. V 6 controller, pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaner, pressure booster. 1 rotary-tilting table WPK 5000, load capacity 500 kg. 1 start preselection, 1 control unit for customer-supplied sliding door. Gas nozzle sensor, arc seam tracking, point editor. The system will be completely overhauled and serviced before delivery. A second station with an additional identical rotary-tilting table is possible. Kodsizwv Nepfx Aciodt

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Ksdpfx Aouz If Neciodt Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Gamybos metai: 2023, būklė: naujas, mašinos/transporto priemonės numeris: PRJ065955, ALZMETALL bench drilling machine - Drilling capacity in steel: 12mm Chuck mounting: B16 external taper, spindle stroke: 40mm, throat depth: 200mm, column diameter: 50mm, usable machine table surface: 300x240mm, with 2 T-slots (12mm x 80mm), distance spindle–base plate min./max.: 110/250mm, manual feed, machine height without options: 670mm, net weight: 64 kg. - Infinitely variable speed from 250 to 5000 rpm Standard Equipment: 5" TFT LCD display with touch function: manual input of target spindle speed, display of actual spindle speed, integrated drilling depth display with touch zero setting, virtual drilling depth scale on display, machine status indicators and warning messages on the display, service information, selectable operating languages: DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, power plug pre-installed, cable length 2m, three separate buttons for clockwise/counter-clockwise/stop, spindle brake function, spindle guard with electrical interlock, lockable main switch, mushroom-head emergency stop button (latching), stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black. Including the following options: LED machine lamp, item 12. Kodpfjlub Rdex Acijdt Delivery time: ex stock Waiblingen Beinstein

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), ašių skaičius: 2, Šis Nikon V-12BDC pagamintas 2019 m. Jame yra 305 mm skersmens ekranas, 250 × 150 mm dydžio matavimo pakopa ir integruoti XY bei kampiniai skaitmeniniai ekranai, skirti tiksliems matavimams atlikti. Prietaise yra 3 padėčių objektyvo bokštelis greitam didinimo keitimui ir aukštos kokybės halogeninis apšvietimas, užtikrinantis aiškų vaizdą. Idealiai tinka gamybos kontrolei ir tiksliajai mechanikai. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. • Šoninis vaizdas (be atspindžių), kad būtų lengva įvertinti Kodpfx Acox D I Etoiedt • 3 padėčių objektyvo bokštelis greitam didinimo pasirinkimui • Padidinimai: 10×, 20×, 50×, 100× • Ekrano skersmuo: 305 mm • Matavimo pakopos eiga: 250 × 150 mm (8 × 6"); 2 tipo sukamoji pakopa • Didžiausias ruošinio aukštis: 100 mm • Integruotas XY ir kampų skaitmeninis ekranas tiksliems rodmenims gauti • Apšvietimas: kontūrinės (skleidžiamos) ir vertikalios (krintančios) šviesos derinys • Šviesos šaltinis: 24 V / 150 W halogenas, skirtas aukštos kokybės projekcijai • 4 kartų skleidžiamos šviesos kondensatorius su automatiniu apšvietimo reguliavimu pagal didinimą • Optika: pusiau permatomas veidrodis, kad būtų aiškus vaizdas krintančioje šviesoje; telecentriniai lęšiai, kad vaizdas būtų matomas visame lauke be iškraipymų • Fokusavimas naudojant judančią optinę galvutę (pakopa išlieka stabili, kad būtų išvengta matavimo nuokrypių) • Matavimo tikslumas: kontūro apšvietimas ±0,1 %; polinkio ir ploto apšvietimas ±0,15 %. • Tvirta konstrukcija su tiksliai suprojektuotomis kreipiančiosiomis; paruošta dirbtuvėms ir lengvai valdoma • Patvirtinta Nikon kokybė, pagaminta Japonijoje • Didelis projekcijos plotas, tinkamas vidutinio dydžio ir sudėtingiems ruošiniams • Greitas didinimo keitimas per reversą • Idealiai tinka gamybos kontrolei, įrankių gamybai, tiksliajai mechanikai ir bandinių tikrinimui • Lanksčiai atnaujinamas skaitmeninėmis sąsajomis arba SPC jungtimis

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Kodpfx Aovdk N Escijdt Hydraulic preinstallation for Arobo steady rest

Būklė: geras (naudotas), Gamybos metai: 2005, Machine type: Cylindrical grinding machine Manufacturer: Junker Model: Jumat 5340/s Serial number: 2328 Year of manufacture: 2005 Kedpfx Aokyrqiociedt Available immediately Ex site, self-dismantling by buyer Dismantling and loading can be offered as an option

Būklė: naudotas, Gamybos metai: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/rev Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. [dimension missing] m MONNIER & ZAHNER Switzerland Kdodpfx Aet Hwzcjcist Thread Whirling Machine with Automatic Workpiece Loading System Type MZ 600, Year of Manufacture approx. 1991, #3591 _____ Max. workpiece Ø: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Worm leads: 1 Axis distance tool-workpiece min./max.: 0–70 mm Whirling head swiveling: ±12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/rev Whirling head drive: approx. 1.5 kW Total drive: approx. 4.5 kW – 220 V/380 V / 50Hz Weight: approx. 1,700 kg Accessories / Special equipment: The machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a Rübenach vibrating bowl with pneumatic swivel gripper for introducing blanks, as well as a counterpoint (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electronic program control with display for motion sequence monitoring. Fault indication, piece counter, oil mist extraction, coolant system, etc.

Būklė: geras (naudotas), Gamybos metai: 2014, Siūlomas šveicariškas Tschudin gamintojo becentris apskritiminio šlifavimo staklės su automatizavimo sistema. Ksdpox Urh Aofx Acijdt Įranga yra labai geros būklės, galima apžiūrėti vietoje. Techniniai duomenys – PDF faile.

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Well-maintained used Sunnen honing machine with Felsomat loading system. Bore diameter range (internal Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when equipped with CGT tools TurboHone® tools: 3.81 to 32 mm when equipped with MMT tools Connecting rod tools: 53.8 to 63.8 mm when equipped with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Maximum workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 strokes/min, adjustable Cooling system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Kdsdpfx Acjud Nm Roiot Compressed air requirements: 566 l/min at 4.48 bar, recommended 5.52 bar Temperature range: 0° to 35° C Floor requirements: (concrete floor) Minimum 150 mm thick Machine dimensions: L 2946 mm x W 2971 mm x H 1829 mm Colour: Pearl grey with tin grey and burgundy accent stripes Weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special Features: Automatic setup: spindle speed, stroke speed, stroke length, feed rate, and spark-out Automatic finish machining: standard Operating modes Automatic: Manual: Series production Single part production Clamping optional

Gamybos metai: 2023, būklė: paruoštas naudoti (naudotas), Tekinimo ilgis: 705 mm, tekinimo skersmuo: 230 mm, X1/X2 eiga: 165 mm/195 mm, Y eiga: 100 mm, Z1/Z2 eiga: 700 mm/702 mm, strypo pralaidumas: 51 mm, apsukos: 6000 aps./min, įrankių vietos: 2x12. Staklių matmenys X/Y/Z: apie 5100 mm/2200 mm/2500 mm, svoris: apie 8400 kg, valdymas: Fanuc 31i-B, darbo valandos: 1565 h, veleno valandos: 506 h. Yra transformatorius, drožlių transporterio įrenginys, filtravimo sistema ir aušinimo įrenginys. Kabinos durų stiklas yra įskilęs. Dokumentacija prieinama. Galima apžiūra vietoje. Ksdpfxexaphne Aciodt