Cilindrinė šlifavimo mašina

Junker Jumat 5340/S

Sąlyga: naujas,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system Nodpfxjxgnz Ts Af Nowb - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Sąlyga: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 109 078 h, X ašies eiga: 650 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 45 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, greitasis eiga Z ašyje: 45 000 m/min, valdiklio modelis: Siemens 840 D, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C30 U Siemens 840D Mašina įjungta: 109078 val. Veleno įjungta: 22117 val. - Velenas HSK-A63, 10000 aps./min - 32 įrankių vietos - Apvalus stalas SRT 280 mm su integruota SK50 tvirtinimo sistema (jei nereikalinga, galima uždaryti arba perkonstruoti kaip nulinio taško tvirtinimo sistemą) Nwjdexcp Slspfx Af Njb - Išorinė aušinimo skysčio tiekimo sistema - Vidinė aušinimo skysčio tiekimo sistema su popierinio juostos filtru, 80 bar - Drožlių nuplovimo pistoletas - Drožlių transporteris - Rankinis valdymo modulis - Automatinės kabinos durys - 32 įrankių vietos ir dar 87 vietos ZM87 - Šiluminė kompensacija - BLUM įrankių matavimo sistema Wange - Matavimo zondas Renishaw - Drožlių talpykla - Būklės signalinė lempa Mašina pilnai patikrinta, yra geometrijos protokolas ir apvalumo testų matavimai. Mašiną galima apžiūrėti ir išbandyti prijungtą prie elektros bet kada. Labai gerai prižiūrėta būklė.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 810 mm, sukimosi skersmuo virš skersinio stumduko: 800 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 25 000 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 110 mm, Z ašies eigos atstumas: 810 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 50 m/min, sukimosi greitis (maks.): 6 000 aps./min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing Diameter Over Bed: 800 mm Swing Diameter Over Cross Slide: 800 mm Maximum Turning Diameter: 320 mm Standard Turning Diameter: 200 mm Maximum Distance Between Centers: 1,130 mm Maximum Turning Length: 810 mm Maximum Workpiece Dimensions: 300 mm TRAVELS Turret Axis X1 & X2: 210 mm Turret Axis Y1 & Y2: +65 / -45 mm Turret Axis Z1 & Z2: 810 mm Head Axis B2: 920 mm MAIN SPINDLE Maximum Spindle Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Machinable Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° SUBSPINDLE Maximum Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° FEED RATES Turret 1 Rapid Traverse X/Y/Z: 30/20/50 m/min Turret 2 Rapid Traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of Turrets: 2 Number of Tool Stations per Turret: 16 Turning Tool Shank Cross Section: 20 x 20 mm Max Boring Bar Diameter: 32 mm Turret Indexing Time (1 station): 0.18 s Max Speed of Driven Tools: 6,000 rpm Driven Tool Motor Power (5 min / continuous): 7.5/5.5 kW Nwedowlvlgspfx Af Neb DIMENSIONS Installation Area with Chip Conveyor: 5,120 x 2,720 mm Net Weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Interface for bar feeder • Gantry parts unloading arm • Tool load monitoring and load management system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 self-centering chucks, Ø 210 mm • 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacture: 2010

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2010, keliamoji galia: 200 kg, rankos pasiekiamumas: 2 400 mm, PLC Merkezi olarak, stoklarımızda bulunan endüstriyel robotlarımız ile bu örnekteki gibi özel mühendislik projeleri gerçekleştirebiliriz. Size aşağıdaki konularda destek olabiliriz: - Kaynak - Kesme - Makine Besleme - Paletleme - Depaletleme - Mermer İşleme - Abkant Makinesi Besleme ve Metal Bükme - Ve daha birçok proje Marka: KUKA Model: KR200-3 Comp Durum: 1 yıl garantili, revize edilmiş Versiyon: V5.6.12 Nedpfx Aeq Dpxdsf Newb Yıl: 2010 Kontrol Kabini: KRC2 ed 05 Nominal Taşıma Kapasitesi: 200kg Erişim Mesafesi: 2400mm Dahil Olanlar: Manipülatör + Kontrol Kabini + Tüm Kablo Setleri + Teach Pendant + 1 Hertz Spindle Motor (Yeni) + Delta Spindle (Mekanik Sistem ile Takım Halinde) + Takım Değiştirici Tabla Dahil Olmayanlar: 7. Eksen, Mühendislik Tasarımı ve Danışmanlık Nakliye: Fiyata DAHİL DEĞİLDİR Ödeme: Teslimattan önce %100 ödeme

Sąlyga: naujas, Gamybos metai: 2023, Naujas trijų fazių epoksidu lietas sausasis paskirstymo transformatorius, gamintojas SEA Italija. 1 vnt.: 800kVA 6000 (± 2 x 2,5 %) /400V; Dyn1, IP00, pagaminimo metai 2023, ecodesign 2 nuostoliai, projektinė dokumentacija ir vieneto protokolas, naudojimo instrukcijos. Nwedpfjndn Hrox Af Nob

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Customs Tariff Number: 8456.30 20 Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Machining Type: immersion Nsdpfx Ajw Ucyusf Nswb Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data provided without liability for errors or omissions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, 7 axes Control: FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub-spindle) Max. spindle stroke 205 mm Max. spindle speed 10,000 rpm Nsdpfxjwnd Dpe Af Newb Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear machining) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear-side machining

Sąlyga: geras (naudotas), Gamybos metai: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Model: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Control: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control Njdpowcxlwefx Af Nswb and ShopTurn 3 G Power-on hours: 41,378 h Program run time: 24,814 h Technical data and equipment available on request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, veikimo valandos: 47 600 h, mašinos/transporto priemonės numeris: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions X-axis Nsdsh Dzqlepfx Af Nswb Z-axis C-axis Automatic tailstock Chip conveyor