Sezono juosta

MWT Lettershopsysteme GmbH Octopack 1500

Gamybos metai: 2000, būklė: visiškai atnaujintas (naudotas), System for filling, cooling and sealing plastic suppository moulds. Nlsdpfx Ajfc I Hajh Ueb The line was completely overhauled both mechanically and electronically in 2019 and is in like-new condition. Before delivery, the system is tested with suppositories supplied by CP-Citopac GmbH. For further technical details, please refer to the data sheet.

Būklė: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: A1711012, Pos. 1 VEN CLEAN Smart Dust Extraction Unit Compressed air dust extraction system for cleaning workpieces to be painted, specifically for removing dust from profiled workpiece surfaces. Five rotating air-blast stars are installed, which remove dust from the surface. The loosened dust is extracted from both sides via extraction ducts. An external extraction system provided by the customer is required. Technical Data: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Overall width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization via nozzle bar (non-ATEX) with compressed air nozzles, Compressed air consumption: 840 Nl/min Pos. 2 VEN SPRAY Comfort Automatic Spraying Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of manufacture: 2017 - Length: 4,350 mm - Working height approx. 930 mm +/- 20 mm - Working width: 1,300 mm - Operator side: left - Price for overhauled machine - Current condition: machine not overhauled - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Feed speed continuously adjustable: approx. 2–6 m/min - With belt cleaning system with tungsten carbide scraper Complete pre-installation for retrofitting a second washer is provided. - Gun control, Touch Screen CNC7000 - 1 installed paint circuit (additional circuits optional) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Power supply: 400 V / 50 Hz - Colour: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% Nledsu U Ryyspfx Ah Ujb _____ Optionally, we can also offer you assembly and commissioning of the system, as well as training for your staff. Upon request, we also provide regular maintenance and servicing for the machine. For further information, simply contact us!

Būklė: labai geros būklės (naudotas), Power: 220-240VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH OUTPUT CONVEYOR BELT Return belts: For envelope size 10.5 cm x 14.8 cm and for portrait orientation, the return belts should be pushed towards the central transport belt. Rule: for large envelopes, push the return belts outward; for small envelopes, push the return belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER requires no synchronization. Position the feeder into the printing press using the handles and set the required height with the hand crank. Important: Only after setting the print height, secure the rear rollers and check the machine's stability. Switch on the machine and begin printing. Nodpfx Aoh Eibaeh Uelb For single-sheet feeder printing machines (GTO): adjustable inclination. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speed. Compatible with all 36 x 52 printing presses, regardless of the feeding system (stream feeder / single-sheet feeder). – No mechanical modifications to the press required. – No synchronization settings needed thanks to laser technology. – Extremely short set-up times enable economic use from as little as 1,000 envelopes – Easy operation – The feeder’s design enforces overlapping feeding. This ensures the Stenz Feeder’s throughput is not restricted – Minimum wear parts for extremely long service life – Already approved in thousands of presses worldwide – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing press Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Būklė: naujas, Typ: SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querwalzenmotor: 1,5 kW × 1 Nlodedmi Niopfx Ah Uob Schraubwalzenmotor: 2,2 kW × 2 Vorschubmotor: 2,2 kW Hubmotor (oben/unten): 0,37 kW × 4 Schenkelschwenkmotor: 0,37 kW × 2 Arbeitstisch-Hub: 0,55 kW Transportabmessungen (L×B×H): 3650×1850×2100 mm Gewicht: 4200 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany Nlsdpfx Aeh Ek Dash Uob - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Gamybos metai: 2016, veikimo valandos: 10 900 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įrenginys yra labai geros būklės ir visiškai veikiantis. Mums jo nebereikia, todėl parduodame. Reguliariai prižiūrėtas. Išmontavimas ir pakrovimas į sunkvežimį įskaičiuoti į kainą. Papildoma informacija: 4 ašių profilių apdirbimo centras Sukurtas lankstiam ir efektyviam aliuminio apdirbimui Autonominis spaustuvų pozicionavimas Maks. darbo ilgis: 7 600 mm Nodpfxjwwtyle Ah Uslb 8 pneumatiniai spaustuvai Įrankių keitiklis 8 įrankiams Veleno darbo laikas: 5100 val. Papildomos techninės specifikacijos – pagal užklausą.

Būklė: geras (naudotas), Rotary vane vacuum pump /// Oil-lubricated Njdpfxsbranto Ah Uolb Manufacturer: Busch Model: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: Completely overhauled If you have any questions regarding this listing or general questions about vacuum technology, please do not hesitate to contact us.

Būklė: geras (naudotas), Heidelberg STA-M 30F seitlicher Pharmaausleger Hergestellt von Heidelberg, Deutschland. Kann an jede Heidelberg-, Herzog Heymann-, MBO-, Horizon- usw. Falzmaschine angeschlossen werden. Das Gerät kann auch unabhängig von der Falzmaschine betrieben werden. Stufenlose Einstellung der Auslagegeschwindigkeit. Nledpfxew D E Nls Ah Uob Höhenverstellbar. Paketzähler mit Auslageschaltung.

Būklė: naudotas, Gamybos metai: 2011, mašinos/transporto priemonės numeris: 1205, Perfect Binding Line Kolbus KM 412.B Year of manufacture: 2011 Comprising: Book Block Feeder Meccanotecnica XMT Year of manufacture: 2011 - Right-side feed belt Gathering Machine Kolbus ZU 841.B Year of manufacture: 2011 Description: - Manual feeding station - Universal underframe: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet type detection: SignalLynx Card Gluer Kolbus KK 841 - Hotmelt gluing: Nordson Problue - Air Center: VariAir central system - Eject delivery for incomplete products: AS 841 - Setup element - Intermediate element with vibration - Transfer to the binder Perfect Binder Kolbus KM 412.B Year of manufacture: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Exclusive dust extraction, machine was connected to central dust extraction system - Drive station for 1st spine gluing unit - Cold glue spine gluing unit, interchangeable - Intermediate drying station (infrared) - Drive station for 2nd spine gluing unit - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: LH 375.C - 1st PUR spine gluing unit, interchangeable - Premelter for PUR spine gluing unit: Nordson XNO 962 - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Premelter for side gluing unit: LH 375.A - Gauze station - Heating elements in curve: IR - Overlapping cover feeder: SAL 413.B - Scoring station: 6 - 1st pressing station Nlsdst Rmhaspfx Ah Uob - 2nd pressing station - Laying-off device (to the left) Conveyor Section Kolbus TSE Description: - Transport system, length (approx.) - Emergency delivery Drying tower Three-Knife Trimmer Kolbus HD 153.P Year of manufacture: 2011 Product counter: 148 million Description: - Co-Pilot with touchscreen - Infeed from right - Counting stacker - Knife presetting device - Total number of knife sets: 2 - Exchangeable cutting cassettes (standard set): 7-18 - Silicone spray device Book Stacker Kolbus (RIMA) XRS 130 Year of manufacture: 2011 Description: - Compensating book stacker - Delivery to left and right

Būklė: naujas, Gamybos metai: 2026, garantijos trukmė: 12 mėnesiai, bendras plotis: 2 300 mm, bendras ilgis: 1 300 mm, bendras aukštis: 2 450 mm, įvesties srovės tipas: trifazis, Powder Coating Booth, Paint Wall, Extraction System TQN2020 Nsdpfxed S N Szo Ah Uelb Working dimensions (mm): 2000 (width) x 2000 (height) x 400 (depth) Overall dimensions (mm): 2300 (W) x 2450 (H) x 1300 (D) SPECIFICATION: • Fan power 2.2 kW • Capacity 10,500 m³/h • 3 x 100% polyester filters • Filtration efficiency 99.9% • IP66 control panel • Automatic filter cleaning • Hermetic IP65 lighting • Paint container Booth available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products of the BUMEX SP. Z O.O. brand are EC certified. We offer our own transport – prices are determined individually for each offer. We issue invoices with VAT shown separately. Short delivery times! Possibility to order machines in various, custom configurations and dimensions! Please contact us.