Pramoninis priekaba VAL30 – 10 tonų

Multi-Trans VAL30

Būklė: labai geros būklės (naudotas), bendras ilgis: 6 000 mm, bendras plotis: 2 400 mm, bendras aukštis: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on level, paved surfaces for in-plant transport. Train Operation (Towing Combinations): The trailer components are not (without a trailer coupling) intended for operation in a combination with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are only permissible upon notification. Loading Platform: Dimensions approx. 6000 x 2400 mm, loading height approx. 670 mm, loading surface covered with softwood planks, all-around edge protection Steering: Four-wheel stub axle steering; drawbar can be raised, removed, and swapped from front to rear; hitch height at towing vehicle approx. 320 mm (other hitch heights only permissible upon notification); towing eye according to DIN 74054, diameter 40 mm; drawbar drop safety device according to UVV regulations Pgsdjxrtdqopfx Al Ijr Chassis: Both axles steering, elastic solid rubber tires approx. 425 x 300 mm, wheel hubs with tapered roller bearings and lifetime grease lubrication Paintwork: Top coat RAL 5002 ultramarine blue Additional Equipment: - Two lashing bars (per side), made of round steel, welded vertically into the outer frame - Double-acting wheel chock with holder and chain

Būklė: naudotas, Technical details: Pressing force: 100 t Installation height (table/ram top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size: 750 x 560 x 90 mm Table opening (diameter): Ø 26 mm Ram clamping surface (WxD): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor: 720 mm Pgodpfx Alevc Ax Ne Ier Total power requirement: 17.0 kW Machine weight approx.: 5.5 t Approx. machine dimensions (LxWxH): 1.8 x 1.2 x 3.2 m

Būklė: labai geros būklės (naudotas), bendras ilgis: 6 000 mm, bendras plotis: 2 400 mm, bendras aukštis: 750 mm, spalva: mėlyna, Operating Conditions: The industrial trailer is designed for use on flat, paved surfaces within internal company traffic. Train Operation: The trailer components are not designed (without a towing hitch) for train operation with multiple trailers. Payload: The industrial trailer can transport loads up to a maximum of 25 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Pgjdpfjxrtb Nex Al Ior Main Frame: The main frame of the industrial trailer consists of a sturdy welded construction made from section steel. Loading Platform: The size is approx. 6000 x 2400 mm. The loading height is approx. 750 mm. The platform is covered with softwood planks and edged with a continuous edge protection. Steering: Four-wheel Ackermann steering, tow bar can be raised, removed, and swapped from the front to the rear. Hitch height at the towing vehicle is approx. 285 – 775 mm (other hitch heights only available upon request). Towing eye according to DIN 74054, diameter 40 mm. Tow bar drop protection complies with accident prevention regulations (UVV). Chassis: Both axles of the industrial trailer are steered. Elastic solid rubber tyres approx. 559 x 356 mm. Wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Additional Equipment: On each of the two longitudinal sides of the industrial trailer, 2 lashing bars made of round steel are vertically welded into the outer braces. For rental or sale across the EU.

Būklė: labai geros būklės (naudotas), bendras ilgis: 4 100 mm, bendras plotis: 2 100 mm, bendras aukštis: 560 mm, spalva: mėlyna, OPTIONAL ALSO AVAILABLE WITH ROOF STRUCTURE! Pjdjxrtgfspfx Al Isgr Operating Conditions: The trailer is designed for use on level, paved surfaces in in-plant transport operations. Payload: 6 t at 6 km/h with evenly distributed loading (surface load) on the loading platform between the axles. Point or line loads are only permitted upon prior notification. Main Frame: Robust welded construction made from profile steel sections. Loading Platform: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, fitted with phenolic plywood panels. Deflectors on the front sides of the chassis frame. Steering: Four-wheel stub axle steering, drawbar can be raised, not convertible or removable. Drawbar drop safety device in accordance with UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with taper roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue. Other Features: - Collision protection on the front frame ends made from teardrop-shaped half-shells. - Continuous anti-slip edge approx. 25 mm high - Lateral underrun protection at the height of the diagonal bar - Pin coupling with captive pins, spring-secured pin, diameter 30 mm, at the rear end - Double-acting wheel chock with chain - Two rear reflectors at the rear end - Prepared for roof structure

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, CNC Vertical Machining Center MIKRON VCP 800 W With Heidenhain iTNC 530 path control Year of manufacture: 2002 Travel paths: X 800 Y 650 Z 500 mm Spindle speed range: 0 – 20,000 rpm, stepless Including the following accessories: - Fixed angle table, 900 mm x 600 mm clamping surface - Vertical tool changer with 30 magazine slots (HSK 63) - Fully enclosed cabin with sliding doors and internal lighting - Electronic handwheel - Tool measurement in the workspace (BLUM laser) - 3D infrared probe Renishaw - Chip conveyor - Coolant system - 4 height-adjustable machine feet - Operating manuals Pjdpfx Aljviq U Es Iogr

Būklė: naujas, Dimensions (L x W x H): 780 x 480 x 1050 mm Weight: 79.5 kg Number of drawers: 6 pcs. The tool trolley is equipped with 6 storage drawers. The tool trolley is fitted with 2 fixed and 2 swivel castors, one of which has a brake. The tool trolley is fully lockable thanks to an integrated lock. Each drawer can be individually locked. All drawers are equipped with quick-release catches and damping. Height-adjustable storage compartment behind the door. Central locking system with 2 keys. Pjdpfx Alsu Imk Rj Iegr The tool trolley is equipped with 155 pcs. of tool parts: 3 socket sets: 1/4", 3/8", 1/2". Ratchet ring spanner set from 6 to 22 mm, Socket set extensions, various Allen keys from 1 to 10 mm, Various screwdriver sets. Assorted pliers.

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Podpoh Nypfjfx Al Ijgr

Būklė: geras (naudotas), Gamybos metai: 2004, IXION AUERBACH IA2 TLF-1200.4 Metų gamyba: 2004 Gamykliškai atnaujinta: 2023 Valdymas: HEIDENHAIN 430M Pgedpoydmuuofx Al Isr X ašis (stalas, išilginis): 1 200 mm Y ašis (giluminio gręžimo ir frezavimo agregatas, vertikali): 1 200 mm Z ašis (bokštas, horizontalus): 700 mm W ašis (giluminio gręžimo ir frezavimo agregatas, horizontalus): 1 200 mm A ašis (giluminio gręžimo ir frezavimo agregato šarnyrinis judėjimas): +25°/-15° B ašis (NC sukamasis stalas): 360° NC sukamasis stalas su 5 tvirtinimo grioveliais: 1 000 x 1 000 mm Didžiausias ruošinio svoris: 7 000 kg Vardinė pavaros galia (S1 / S6): 12 / 18,5 kW Sukimo momentas: 115 Nm Sukimosi greičio diapazonas: 60–6 000 aps./min. Maks. gręžimo gylis vienu kartu: 1 200 mm (2 važiuojančios atraminės lūnetės) Aukšto slėgio aušinimo skysčio sistema giluminiam gręžimui: 100 bar ir 42 l/min Įrankių keitiklis 24 įrankiams Su verpstės išpūtimu Didžiausias įrankio ilgis: 300 mm Didžiausias įrankio svoris: 3,5 kg Įrankio skersmuo be laisvos greta vietos: maks. 90,0 mm Su laisva greta vieta: maks. 160,0 mm Darbinės zonos įranga Pilnai uždara darbo erdvė su stogu Alyvos rūko ištraukimo įranga Drožlių transporteris Užimamas plotas: 5 150 x 5 350 x 4 020 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 700 mm, bendras aukštis: 2 800 mm, bendras ilgis: 1 350 mm, bendras plotis: 1 260 mm, ruošinio svoris (maks.): 300 kg, stalo plotis: 450 mm, bendras svoris: 2 300 kg, įvesties srovės tipas: trifazis, stalo ilgis: 888 mm, gręžimo gylis: 500 mm, Technical Equipment - 4-way guide changer - 32-position electrode changer - Prepared for rotary-swivel axis - High-quality drive axes and guides - Integrated compressor cooling units for electronics and external connection option for dielectric cooling - High erosion performance thanks to MOSET generator - Fine filter for working with small tube diameters EROSIX CONTROL SYSTEM - Fast probing - Simple programming for complex 5-axis machining - Comprehensive measuring cycles - Program transfer and storage via TCP/IP interface - High operating comfort Podpfjvppw Sjx Al Iegr

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Forklift Kalmar LMV 9-600 Psdpfx Aljvq Im Us Ijgr Load capacity 9 t Diesel