Piešimo presas -

MUELLER CEZ 25.13.6

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Isdpfxorn Riqj Afwsa Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, veleno skylė: 83 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 570 mm, tekinimo skersmuo virš viršutinio vežimo: 340 mm, quill skersmuo: 80 mm, šilko eigos atstumas: 200 mm, bendras svoris: 3 200 kg, įvorės išorinis skersmuo: 250 mm, Įranga: sūkių greitis be galo kintamas, The machine is in very good condition. Isdpfx Ajwxw S Ijfwsa Available immediately! Can be tested under power.

Gamybos metai: 2019, Sąlyga: paruoštas naudoti (naudotas), Connected load: 84 kVA, Length: 5065 mm, Width: 1100 mm, Height: 1530 mm. Ijdsg A Trgjpfx Afwja

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8044000703A, Siemens 840 D Control Country of Manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan) 4228x2260x1775 mm (with chip conveyor) Net Machine Weight: 3,400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working Capacity Maximum swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Center height: 190 mm Distance between centers: 581 mm Feed Drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C Axis with Siemens Control Iodpfxow T Sqyj Afwsa Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing inner diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Main Drive with Siemens Control Drive power (40% / 100% DC): 16.5 / 11 kW Torque (40% / 100% DC): 166.5 / 112 Nm Max speed: 5,000 rpm Tool Turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Cylinder diameter: 30 mm Tool change (with lock): 0.95 sec Tool change (without lock): 0.4 sec Live Tool Turret with Siemens Control Number of driven tools: 12 Drive power (40% DC) at 4,000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Travel, automatic: 396 mm Quill bore: flange Max quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Coolant System Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical Connection Max power requirement: 21 kVA Voltage: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental Conditions Ambient temperature: +15 to +35°C Max humidity: 75 % Unless otherwise stated, the technical specifications are provided without guarantee.

Sąlyga: geras (naudotas), Gamybos metai: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year of manufacture: 2018 Ijdpjwz I Acefx Afwja Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry newly set. Travels: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Controller: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 Machine equipped as follows: - 60-position tool changer - ICS (internal coolant supply, 20 bar) with band filter system - Air through the spindle - Kessler rotary table, diameter 500 mm - Infrared workpiece measurement - 3D probe - Tool measurement via BLUM laser - Rotating sight glass - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction unit - Heidenhain linear measuring systems X, Y, Z - Sealing air for all linear measuring systems - Active electrical cabinet cooler (air-to-air) - Active cooling for 4th and 5th axes, controlled - Network connection + USB port - Regulated spindle chiller - Heidenhain rotary measurement system - Contour protection POSkontur - Exterior hinge-belt chip conveyor - Coolant supply pump at head controlled via M functions - Pump for chip flushing device - Chip flushing device - Machine status beacon - Air at the spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - Triple media interface in table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W: 4,800 / D: 4,600 / H: 3,000 mm + ICS unit (LxWxH): 2,200 x 1,300 x 1,400 mm Weight: approx. 13,000 kg The machine is in excellent condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry set (guides repaired and adjusted). Since then, the machine has seen only limited production usage.

Gamybos metai: 2017, Sąlyga: paruoštas naudoti (naudotas), Laser power: 10 kW (10,000 W), working area: 3000 mm x 1500 mm, max. material thickness: mild steel: 25 mm, stainless steel: 30 mm, aluminum: 30 mm, copper: 12 mm, brass: 15 mm. Positioning speed: 120 m/min, positioning accuracy: +/-0.05 mm, max. workpiece weight: 1,100 kg. Machine dimensions (X/Y/Z): approx. 9500 mm / 3500 mm / 3500 mm, extraction unit dimensions (X/Y/Z): approx. 1500 mm / 1500 mm / 4000 mm, machine weight: approx. 12,000 kg, operating hours: approx. 17,000 h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Ijdjvyiqgepfx Afwea

Sąlyga: geras (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 120K587, Good day, For sale is a well-maintained Quaser MV204II universal CNC milling machine with HEIDENHAIN control system, offering an unbeatable price-performance ratio. The purchase price includes: tool changer, touch probe, chip conveyor, coolant system, hydraulic system, documentation/machine manuals, etc. Machine dimensions: Height: 2,825 mm Width: 2,650 mm Length: 2,200 mm Weight: 7,500 kg Axis travel: X-axis travel: 1,020 mm (feed rate: 32,000 mm/min) Y-axis travel: 600 mm (feed rate: 32,000 mm/min) Z-axis travel: 560 mm (feed rate: 32,000 mm/min) Milling table: Table size: 635 x 1,200 mm Table load capacity: 1,000 kg Table configuration: 6 x 18 mm H 8 T-slots Milling spindle: Max. spindle speed: 7,500 / 10,300 rpm Ijdpspfawhofx Afwoa Max. spindle torque: 252 Nm Further technical details available upon request. A viewing appointment can be arranged at short notice. Best regards,

Sąlyga: geras (naudotas), Gamybos metai: 1989, bendras aukštis: 6 450 mm, For sale: Beche short-stroke drop forge hammer KGH 4B. Machine weight: 65 t Working capacity: 40 kJ Max. blow frequency: 98/min Max. usable blows: 41/min Max. ram stroke: 790 mm Iedjrt Uc Espfx Afwsa Machine is dismantled Technical data available on request

Gamybos metai: 1992, Sąlyga: geras (naudotas), 21 straightening rollers, Ø 80 mm Iodeg Iirnepfx Afwsa Strip width: 500 - 1,650 mm Strip thickness: 1 - 5 mm

Sąlyga: naudotas, Gamybos metai: 2015, Technical details: X-travel: 960 mm Y-travel: 600 mm Isdpfsrm Txbsx Afwoa Z-travel: 480 mm Rotary table: Ø 350 mm Table load capacity: 200 kg Spindle speeds: 12,000 rpm Spindle drive power: 14/10 kW Control: HEIDENHAIN iTNC 530 Rapid traverse: 32 / 32 / 24 m/min Tool changer: 30 positions Spindle taper: BT 40 Machine weight approx.: 7.4 t Total power requirement: 45 kVA Space required approx.: 3.1 x 2.3 x 3.1 m 5-axis simultaneous universal machining center, NC rotary-swivel table Ø 350 mm, A-axis (+120°/-42°), C-axis 360°, Internal coolant supply (IKZ), Electronic handwheel, Chip conveyor, Direct measuring system, Counter readings: approx. 9,000 power-on hours, approx. 3,500 spindle hours