PEMA sukamieji pakreipiamieji stalai / pozicionieriai

PEMA

Sąlyga: naujas, new Lsdpfsufxa Ajx Ad Tjai entirely stainless steel Diameter: 1,250 mm Adjustable height: 820 – 910 mm with 10 mm high railing 1 speed (3 revolutions per minute) 0.12 kW

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Ledpfx Adern Riqj Tsai Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: geras (naudotas), Gamybos metai: 2007, Ranka parodytos dalys nepridedamos. Lsdpfxsvm Hgrs Ad Toai

Gamybos metai: 2022, Sąlyga: naujas, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg - Workpiece diameter (insertable): 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotational speed: approx. 100–2,000 mm/min - Two-pedal foot switch - Potentiometer for stepless speed control Lodpfsfxw H Ajx Ad Toai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, veleno skylė: 83 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 570 mm, tekinimo skersmuo virš viršutinio vežimo: 340 mm, quill skersmuo: 80 mm, šilko eigos atstumas: 200 mm, bendras svoris: 3 200 kg, įvorės išorinis skersmuo: 250 mm, Įranga: sūkių greitis be galo kintamas, The machine is in very good condition. Available immediately! Can be tested under power. Lasdpfx Aewxw S Ijd Tei

Sąlyga: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG-StoreControl P control system Optional control system expansion available External dimensions: Construction height: 8,700 mm Construction width: 3,500 mm Construction depth: 1,580 mm 51 carriers, each with a payload of 350 kg Clear usable dimensions per carrier: Height = 255 mm Width = 3,050 mm Depth = 520 mm Chain pitch: 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table positioned 990 mm above finished floor level with stainless steel worktop, depth 315 mm Color: grey Drive motor power 1 x 3.8 kW / 400 Volt Lodpjd Spf Rjfx Ad Tsai Subject to errors and technical modifications. Surfaces cleaned, signs of use and minor deformations possible. Delivery & installation currently primarily in Germany, Austria, and neighboring countries.

Gamybos metai: 2017, Sąlyga: paruoštas naudoti (naudotas), Laser power: 10 kW (10,000 W), working area: 3000 mm x 1500 mm, max. material thickness: mild steel: 25 mm, stainless steel: 30 mm, aluminum: 30 mm, copper: 12 mm, brass: 15 mm. Positioning speed: 120 m/min, positioning accuracy: +/-0.05 mm, max. workpiece weight: 1,100 kg. Machine dimensions (X/Y/Z): approx. 9500 mm / 3500 mm / 3500 mm, extraction unit dimensions (X/Y/Z): approx. 1500 mm / 1500 mm / 4000 mm, machine weight: approx. 12,000 kg, operating hours: approx. 17,000 h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Lsdpfxsvyiqgo Ad Teai

Sąlyga: naujas, Gamybos metai: 2024, 600 kg load capacity Height-adjustable welding turntable with 100 mm through-hole Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Height when tilted min. 0.45 m, max. 0.95 m Speed from 0.01 to 1.3 rpm Lsdpfx Aeg Tdpgjd Tsai Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Sąlyga: beveik kaip naujas (parodų įrenginys), 600 kg load capacity welding positioner, height-adjustable, with plate diameter of 1000 mm. Height adjustable from 0.65 m (minimum) to 1.53 m (maximum). Rotation speed from 0.01 to 1.1 rpm. Tilting up to 135°. Manual and foot remote controls with speed display. Very robust design. Laeded D D Hlopfx Ad Tsi

Sąlyga: geras (naudotas), Gamybos metai: 1998, mašinos/transporto priemonės numeris: A 1040, Offer 23342 Hydraulic Welding Turn and Tilt Table – Three Axes – Welding Positioner Technical Specifications: - Maximum load capacity: 750 kg - Faceplate diameter: 700 mm - Minimum table height in horizontal position: approx. 720 mm - Average table height in horizontal position: approx. 920 mm - Maximum table height in horizontal position: approx. 1060 mm - Working height adjustable manually in 3 stages - Faceplate motorized, rotatable, as well as tiltable/inclinable Lasdpfx Aeraiu Ded Tei - Rotational movement electrically adjustable, stepless: approx. 0.01 – 2.0 rpm - Right and left rotation - Welding current transmission: approx. 700 A - Drive: 400 V - Connected load: 1.5 kW - Handheld remote control for rotational direction, tilting/inclining - Space requirement: approx. W 1100 x H 750 x D 700 mm - Weight: approx. 500 kg