Strypinio plieno žirklės + išpjovimo įrenginys

Mubea KBLH 500

Būklė: geras (naudotas), Gamybos metai: 1995, 1 used hydraulic punch Manufacturer: Mubea Model: KLH 500 / 610 Year of manufacture: 1995 Chsdpfxjwxy Dgo An Hoc - Punching force: 50 t - Stroke: 60 mm - Punching capacity: up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - Equipped with support table

Gamybos metai: 1998, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 0159488169537, Offer 23293 Chedpfx Aopuy H Don Hec Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel: 9 mm - or with special punching device: up to 100 mm Ø in steel: 2.5 mm - Stroke, infinitely adjustable: 0 to 28 mm - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - with: - Foot switch - Center punch locating device - Support table with folding stops, W 1100 x D 850 mm - Stop adjustment paths from center of punch - Width between left and right approx. 470 mm x D 510 mm

Gamybos metai: 2020, būklė: beveik kaip naujas (parodų įrenginys), 1x drive unit with chassis 1x idler unit with chassis and height adjustment - Centric roller support adjustment with hand crank. - Manual height adjustment, secured with locking pin - Adjustable height difference: 0–350 mm - Load capacity: 2,500 kg per unit - Workpiece diameter: 200 mm – 2,000 mm - Travel rollers: PUR wheels - Dimensions (L x W): approx. 1,900 mm x 460 mm - Chassis track width: 1,435 mm Codpefxgrdefx An Hehc - Rotation speed: 0 – 2,000 mm/min - Operation: hand-held remote control and foot switch

Būklė: naujas, Gamybos metai: 2025, Pneumatinė radialinė kniedijimo mašina RMU-12-C skirta užkietėjusių plieninių kniedžių su kepurėlės formavimu d=2...12 mm ir plieninių vamzdinių kniedžių d=4x1...14x1 mm formavimui. 1. Pilnų plieninių kniedžių skersmuo – 2...12 mm. 2. Tuščiavidurių (vamzdinių) plieninių kniedžių skersmuo – 4...14 mm 3. Kniedės galvutės eiga – 20 mm. 4. Vienos kniedės išėmimo laikas – 1...10 sek. 5. Variklio galia – 0,75 kW. 6. Įtampa – 220/380 V, 50 Hz. 7. Darbinis slėgis – 3...6 Bar. 8. Svoris – 100...120 kg. Šia kniedijimo mašina galima gaminti tiek judančius, tiek fiksuotus kniedinius sujungimus. Chjdefvztujpfx An Hec Mašinos kaina neskaičiuoja antspaudų ir transportavimo išlaidų.

Būklė: naudotas, keliamoji galia: 3 000 kg, kėlimo aukštis: 7 650 mm, laisvas kėlimas: 2 610 mm, stiebo tipas: triplex, statybinis aukštis: 3 220 mm, šakių laikiklio plotis: 1 100 mm, šakių ilgis: 1 200 mm, tuščias svoris: 4 950 kg, bendras ilgis: 2 430 mm, pavaros tipas: Elektro, statybos plotis: 1 300 mm, Electric 4-wheel forklift Load centre: 500 mm Fork width: 125 mm Fork thickness: 45 mm Mast type: Triplex Technical condition: good Front tyres type: non-marking Rear tyres type: non-marking Chedpfx Anst Ddwrj Hoc Hydraulic sideshift

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 98260075, a used WMW profile steel shear Punching force: 420 kN (42 tons) Punch throat depth: 320 mm Flat bar shear cuts 100 x 18 mm Bar shear cuts solid round/square material: 36/30 mm Further technical data on request. Cjdpfxsb Ilbfo An Hohc

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Sheet width: 1070 mm Sheet thickness: 4.0 mm Maximum bending: 3.0 mm Roll length: 1070 mm Csdpfjxacdpex An Hehc Top roll diameter: 110 mm Bending speed: 3.0 m/min Motor power: 2.2 kW Weight: 848 kg Dimensions (L-W-H): 2250 x 1000 x 1800 mm List price: approx. €10,000 Showroom machine – LIKE NEW (!!) Equipment/features: - Robust electro-mechanical plate bending machine - 2x central rolls driven by electric motor (upper and lower roll) - Forward/reverse operation of the rolls - Top roll manually swing-out, with hinged bearing - Manual adjustment of the side roll - Including conical bending device - Asymmetric roll arrangement - Rolls with profile grooves - Safety device (safety cable with switch unit) - 1x movable control panel - Operating manual (EN)

Būklė: naudotas, Gamybos metai: 1988, Pressure: 100 t Bending length: 2050 mm Distance between uprights: 1550 mm Throat depth: 250 mm Stroke: 200 mm Press beam adjustability: 200 mm Stroke speed – down, unloaded: 105 mm/sec Stroke speed – up, unloaded: 180 mm/sec Stroke speed – under load: 9.5 mm/sec Table width: 200 mm Table height above floor: 900 mm Installation height: 280 – 480 mm Chedpfx Anjtqqyqo Hjc Backgauge – adjustable: 3 – 729 mm Control: CYBELEC SYNCHRO CNC Control: 7400 PS Total power requirement: 7.5 kW Machine weight: approx. 10 t Machine dimensions L x W x H: 3.70 x 2.00 x 2.80 m - 4 controlled axes - Accessories: programmable back gauge, table extensions, various upper and lower tool segments

Būklė: geras (naudotas), Gamybos metai: 1991, mašinos/transporto priemonės numeris: 0168091277886, Offer 23294 Hydraulic Combined Flat and Profile Steel Shear with Notching Device and Punching Station Technical Data: - Flat Bar Shear - Blade length 470 mm - For flat material 450 x 15 mm - Or 300 x 20 mm Cjdpfx Ajrll I Ujn Hjhc - Profile Steel Shear - Angle steel 90° 140 x 13 mm - Angle steel 45° 70 x 7 mm - T-section at 90° 70 mm - Bar Shear - Round steel 50 mm - Square steel 42 mm - Notching Device - Rectangular notch 52 x 90 x 12 mm - Punching Station - Punching force approx. 750 kN - Stroke, infinitely variable 0 - 70 mm - Punches steel up to Ø 30 mm in 20 mm - Throat depth 310 mm - Hydraulic drive 400 V / 7.5 kW - Required floor space approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - With: - 2 pieces of electric foot switches for two separate workstations - Rotary table

Būklė: naudotas, Gamybos metai: 1989, Technical details: Pressing force: 100 t Bending length: 2600 mm Frame gap: 2300 mm Throat depth: 300 mm Control for program: CNC control DNC7000 Installation height: 830 mm Max. stroke: 265 mm Approach speed: 80 - 100 mm/sec Backgauge: motorized Table size: 2700 x 113 mm Working height: 900 mm Codpfxou Icdms An Hohc Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: 11.3 t Machine dimensions LxWxH: approx. 3.2 x 3.8 x 3.0 m 3-point bending – profile bending with Cybelec DNC-7000-PSGHY -Hydraulic cushion (for continuous force adjustment along the entire working length) -Backgauge: width 2200 mm, 2x supports with travel path 1800 mm and 4x stops, travel path W:2550 x L:860 mm -Operator controls: Swiveling control panel on boom and/or control console with two-hand and foot operation -Programmable logic controller TSX21 Sufficient quantity of press brake tools included In scope.