Weinig Profimat 23 pirkti naudotą (473)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
WEINIG
mažas skelbimas

999 km
Langų sistema
WEINIGUnicontrol 6 mit GLS
Skambinti
Sąlyga: naudotas, Groove spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
1 used Weinig Unicontrol 6 with GLS
-----
For sale on behalf of customer
Technical data overview
-----
1. Cross-cut saw
-----
Cross-cut saw, pneumatic, against 8-position turret stop
Spindle speed: 2800 rpm
Spindle diameter: 40 mm
Max. tool diameter: 350 mm
Motor power: 3 kW
Laser guide light for sawing section identification
Manual length stop: 4100 mm
1. Tenoning and grooving spindle
-----
Number of tools: 3 / 4 pcs.
Tool clamping length: 320 mm
Pneumatic vertical spindle stroke: 240 mm for timber thicknesses IV 68-92
Spindle speed: 3500 rpm
Spindle diameter: 50 mm
Max. tool diameter: 320 mm
Motor power: 11 kW
1. Profiling spindle – feed direction spindle (climb and conventional milling)
-----
Position: vertical right
Number of tools: 1 pc.
Tool clamping length: 120 mm
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Max. tool circle: 232 mm
Motor power: 7.5 kW
2. Profiling spindle
-----
Position: vertical right
Number of tools: 3 / 4 pcs.
Tool clamping length: 320 mm
Pneumatic vertical spindle stroke: 240 mm for timber thicknesses IV 68-92
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Max. tool circle: 232 mm
Motor power: 11 kW
3. Profiling spindle (hardware spindle)
-----
Position: vertical right
Number of tools: 3 pcs.
Spindle speed: 6000 rpm
Spindle diameter: 40 mm
Max. tool circle: 180 mm
Motor power: 3 kW
Clamping length: 150 mm
4. Beading saw, horizontal-vertical indexed
-----
Position: horizontal, top
Hedpfxew Im Hxs Acusnu
Number of tools: 1 pc.
Tool clamping length: 40 mm
Spindle diameter: 40 mm
Motor power: 3 kW
Axial stroke: 2 positions
Radial stroke: 2 positions
Additional features
-----
Rebating device for splinter-free rebating
Double part package
Return feed system for single-person operation at working height: swiveling bath
Screen control with 99 programs
Angled window device
Electronic angle display for angled windows
Optional window tooling OPPOLD year 2013:
Oppold IV 68/78/92 timber
Oppold IV 68/78 timber-aluminium
(Technical specifications according to manufacturer – no liability assumed!)
mažas skelbimas

495 km
Optimizatorius
Weinig DimterOptiCut 200 Elite
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Weinig Dimter OptiCut 200 Elite:
Year of manufacture: 2004
Technical data:
Maximum cutting length: up to 6.3 meters
Maximum cutting width: 300 mm
Maximum cutting thickness: 100 mm
Number of ejectors: 3 pcs
Feed speed: Adjustable, from 10 to 250 meters per minute
Control system: PLC with user interface, display, and optimization software
Sensors: Equipped with various sensors for wood defect detection and process optimization
Additional features:
- Automatic defect and marker detection
- Integrated waste management
- Possibility to integrate with other production systems
Machine characteristics:
Precision: High cutting accuracy thanks to advanced optimization algorithms.
Performance: The machine is capable of rapidly processing large volumes of wood, increasing production efficiency.
Safety: Equipped with various safety features, such as protective covers and emergency stop systems.
Flexibility: Adaptable to different types and dimensions of wood, making it a versatile tool for a variety of woodworking industry applications.
For an additional fee, installation, commissioning, and operator training are available.
Hnedpow Dh Rrefx Acueu
mažas skelbimas

472 km
Išleidimo kampinis pernešimas nuo frezavimo staklių
Weinig820 right angle transfer
Skambinti
Sąlyga: labai geros būklės (naudotas), Dažniausiai naudojama didelio greičio gamybos linijose (iki 180 m/min). Didžiausias ilgis – 6,1 m. Ruošiniai dedami ant prieš laikrodžio rodyklę besisukančių volų, taip sukuriama tiksli atskaitos linija. Transporto konvejerio juosta tarp obliavimo staklių ir perkėlimo sistemos ruošiniams atskirti. - Tikslus ruošinių pozicionavimas sekančioje skersinio padavimo sistemoje. - Maža triukšmo emisija dėl kruopštaus grąžinimo į atskaitos liniją. - Automatinis perkėlimas į skersinį padavėją, krautuvą ar tolesnio apdorojimo įrenginį. Esant poreikiui, galime pasiūlyti ir dvi rankenas turinčius statmena kampu perkėlimo įrenginius.
Hodoxbpqropfx Acujnu
mažas skelbimas

670 km
Obliavimo staklės
WeinigUnimat 300
Skambinti
Sąlyga: labai geros būklės (naudotas), Keturių pusių obliavimo staklės Weinig Unimat 300
Darbinis plotis: 230 mm
Darbinis aukštis: 130 mm
Velenų skaičius: 4
Velenų išdėstymas:
1. Apačia ?
2. Kairė 7,5 kW
3. Dešinė
4. Viršus 7,5 kW
Dvi padavimo greičiai: 6-12 m/min
Pneumatiniai spaustuvai
Hedpfxjxak Uie Acuenu
Elektromotorinis darbinio aukščio ir pločio reguliavimas
Įvado stalo ilgis: 2470 mm
Bendra galia: 22,8 kW
mažas skelbimas

1 115 km
Daugiaašmenis pjūklas
WEINIGEconorip 310
Skambinti
Sąlyga: labai geros būklės (naudotas), Multi-blade saw
Max. cutting width: 310 mm
Chain width: 340 mm
Max. feed opening / entry width: 650 mm
Max. cutting height with Quickfix clamping flange: 110 mm
Saw spindle diameter: 65 mm
Min. workpiece length: 500 mm
Max. feed speed: 35 m/min, variable
Main motor power: 22.0 kW, 400 V, 50 Hz
Feed motor: 1.3 kW, 400 V, 50 Hz
Saw blade diameter min./max.: 300 / 350 mm
Working height: 850 mm
Extraction port diameter: 250 mm
Required extraction volume: 5,300 m³/h
Features:
- Quickfix saw blade mounting
- Electrically adjustable saw spindle height
- Electrically adjustable pressure unit height
Dimensions (approx.) L x W x H = 1,750 x 1,750 x 1,500 mm
Weight: 1,850 kg
Included options:
- Oil level monitoring
- SafetyPlus
Hodpfxstwy Ius Acusnu
- Quickfix
Note for used machines:
• Subject to technical changes and prior sale.
• All prices are ex works – free loading!
• The machines have been cleaned and tested for functionality.
• All machines are sold as inspected, with no guarantee or warranty implied. The buyer is free to inspect the machines on site.
• Special agreements are only valid in written form.
(We reply to enquiries only with your address and telephone number!)
mažas skelbimas

30 km
Infeed & Outfeed medienos tiekimui
WEINIG801-000E/802-000E
Skambinti
Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Nauja tiekimo ir ištraukimo įranga ruošinių padavimui obliavimo staklėms bei jų ištraukai.
Weinig grandininė pakavimo padavimo sistema, nuolydžio padavimas, sunki grandininė padavimo sistema (pilnai renovuota).
Padavimo greitis nuo 20 iki 100 m/min.
Didžiausias ir mažiausias apdirbamo ruošinio storis: 12–100 mm
Hedev Tmptepfx Acusnu
Didžiausias ir mažiausias apdirbamo pločio ruoželis: 50–247 mm
Prašome susipažinti su technine specifikacija ir brėžiniais priede žemiau.
mažas skelbimas

999 km
Langų sistema
Weinig, Gubisch, PanhansPFA 17N, CW 2, kompl. Betrieb
Skambinti
Sąlyga: naudotas, Slot spindle, 0
Number of milling units, pcs
Spindle diameter, mm
Number of machines, pcs
Business closure wooden window manufacturing
-----
Machines available immediately.
All still ready for demonstration.
Pos. 1: Weinig PFA 17N, year 1967
Four-side planer, 6 spindles, chain drive, with glazing bead separation,
with planer heads
Variable feed, working width 170 mm, working height 120 mm
Electric height adjustment for feed beam
Pos. 2: MAPO Spu 180, year 1992, veneer machine, mobile
Pos. 3: Gubisch CW 2, year 1998, angle system with return,
with Leitz IV 68 wood, wood-aluminum; Gold IV 78 wood
1 slot spindle, 3 profile spindles
Pos. 4: Götzinger OBM, year 1998, corner bearing and olive drilling machine,
1 drilling head for olives, 1 drilling head for Roto NT corner bearing
with left and right roller tables and stops, drilling on single part
or on glued frames
Pos. 5: Panhans Type 259, year 1995, tilting spindle moulder with extended
support table and frame milling ruler,
Haffner feed unit, 4 rollers, 3000/4000/5000/6000 rpm
Pos. 6: Rapid chain mortiser
Pos. 7: Klein und Söhne, combined surface planer and thickness planer
Pos. 8: Filter house with silo, filter system, fan
Spänex SHB 50-250-SPS, year 1998, briquetting press with automatic control
Spänex return air duct for summer/winter operation, return air ceiling filter
-----
Hnodpow Im Hrefx Acuou
Machines must be dismantled and loaded by the buyer.
Errors and prior sale excepted.
mažas skelbimas

660 km
Keturpusis oblius medienai
WeinigPowermat 1000
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 108111, darbinis plotis: 240 mm, obliavimo aukštis: 160 mm, darbinio aukščio: 180 mm, Four-sided planer after maintenance, machine weight 3,900 kg.
Hnedpfx Acsvrq U Deueu
mažas skelbimas

472 km
Liejimo staklės
Weinig811 Board stacker
Skambinti
Sąlyga: labai geros būklės (naudotas), Standartinė Weinig 811 lentų dėtuvė
Ilgis min.–maks. 1800–6100 mm
Plotis maks. 250 mm
Aukštis maks. 160 mm
Automatinės dėtuvės išleidimas
Dėžės skerspjūvis maks. 1200 x 1200 mm
Dėžės svoris 5000 daN (5 t)
Maks. našumas – 5 sluoksniai per minutę
4 kėlimo svirtys, 4 laikymo svirtys, 4 pakėlimo svirtys
Automatinės dėtuvės padavimo aukštis su liftu apie 850 mm
Hedpfx Aoxbpi Ujcujnu
Dėžės pradžia nuo žemės 600 mm
Variklio galingumas 7,5 kW (10 AG)
Galimi ir 811 grindinio lygio dėtuvės modeliai 6 m lentoms – lentos dedamos ant žirklinio keltuvo su ritininiais konvejeriais.
mažas skelbimas

568 km
Langų gamybos linija
WEINIGC124 Conturex 2
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 113340, ruošinio plotis (maks.): 260 mm, ruošinio aukštis (maks.): 150 mm, ruošinio ilgis (maks.): 6 000 mm, CNC profiling centre Weinig C124 - Conturex 2 – for milling, drilling, and cutting in cross and longitudinal processing.
Technical specifications:
Type: Weinig Conturex2
Year of manufacture: 2009
Machine number: 113340
Performance: up to 40 windows / 8 hours
Min. workpiece length: 250 mm
Max. workpiece length: 4500 mm (optionally 6000 mm)
Workpiece width: 30 – 260 mm
Workpiece height: 25 – 150 mm
Main spindles: 2 × 30 kW, up to 24,000 rpm
Includes a complete set of over 50 tools as shown in the photo.
Clamping system: PowerGrip RePos – automatic with repositioning
Hnedpfx Ajwcdm Tjcuju
Table length: adapted to max. workpiece length 4500/6000 mm
mažas skelbimas

670 km
Obliavimo staklės
Weinig140/4A
Skambinti
Sąlyga: labai geros būklės (naudotas), Ketursienė obliavimo staklės Weinig 140/4A
Darbinis plotis: 140 mm
Darbinis aukštis:
Velenų skaičius: 6
Velenų išdėstymas:
Apačioje 3 kW
Dešinėje 2,2 kW
Hnsdpsw Tiyxsfx Acuou
Viršuje 3 kW
Apačioje 3 kW
Dešinėje 4 kW
Kairėje 3 kW
Padavimo greitis reguliuojamas:
Pirma pavara 4,3/5,3/14,5/18 m/min
Antra pavara 8,6/10,6/29,0/36,0 m/min
Bendra galia: 21 kW
mažas skelbimas

1 046 km
Obliavimo staklės ir frezavimo staklės
WEINIGUnimat 1000
Skambinti
Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 260 mm, obliavimo aukštis: 160 mm, ašies skersmuo: 50 mm, obliavimo plotis: 260 mm, darbinio aukščio: 160 mm, padavimo variklio galia: 4 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: trifazis, ašies skaičius: 5, galia: 39 kW (53,03 AG), įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Unimat 1000 su grioveliu stalu
Darbinis plotis: 260 mm
Darbinis aukštis: 160 mm
5 velenų
Veleno skersmuo: 50 mm
Velenų išdėstymas:
1-Apačioje (7,5 kW) 7000 aps./min
2-Dešinė (7,5 kW) 7000 aps./min
3-Kairė (7,5 kW) 7000 aps./min
4-Viršuje (7,5 kW) 7000 aps./min
Hnodpfx Acjxk U Tkeuju
5-Apačioje (5,5 kW) 7000 aps./min
Padavimo galia: 4 kW / 6–36 m/min
Vienas pavaromas volas prie išėjimo ant stalo.
mažas skelbimas

999 km
CNC apdirbimo centro langai ir durys
WEINIGConturex 2 C 114
Skambinti
Sąlyga: naudotas, Gamybos metai: 2009, max. workpiece length 4500 mm
Milling spindle: 1 unit
Main motor: 20 kW
Control system: Siemens
Weinig Conturex 2 C 114
-----
Working width: 40–260 mm
Working height: 25–110 mm
2 x PowerGrip clamping tables, each 2280 mm
-----
Workpiece length: 200 – 4,500 mm
Machining of workpieces longer than 2,700 mm is carried out
using a shuttle cycle.
Main spindle 1:
-----
Motor with brake, 20 kW
HSK 63F
Electronically adjustable speed: 2,000–18,000 rpm
Maximum tool length from HSK 63 F reference surface: 290 mm
With C-axis
Hsdpewunwysfx Acuenu
Tool magazine:
-----
Number of slots: 30
Slot spacing: 100 mm
Multi-spindle boring unit permanently installed
-----
for horizontal and vertical drilling and milling without tool change
-----
Price ex location
Prices for
Dismantling and loading onto customer truck
Transport within Germany and abroad,
reassembly,
commissioning,
and if required, new profiles available on request!
Including used tools (drawings available on request!):
-----
Wood: IV 68, 78, 88 inward and outward opening, with fitted drip rail
Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78
Lift/slide doors IV 68 and 78
Entrance doors IV 68 and 78
Pivoting windows
Corner joint: counter/dowel
Technical data as per manufacturer – without guarantee!
Detailed technical description available on request!
mažas skelbimas

387 km
Weinig Powermat 500 + Weinig High Mech
WEINIGPowermat 500
Skambinti
Sąlyga: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 230 mm, obliavimo aukštis: 170 mm, ašies skersmuo: 40 mm, obliavimo plotis: 230 mm, darbinio aukščio: 170 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, ašies skaičius: 7, – German-made
– Year of manufacture: 2008
– Technical documentation (DTR) included
– Controlled by Memory System
– First spindle equipped with PowerLock tool clamping
TECHNICAL SPECIFICATIONS:
– Planing width: 230 mm
– Planing height: 170 mm
– PowerLock tool clamping (on the first spindle)
– 1st bottom spindle: 11 kW
– 2nd right spindle: 7.5 kW
– 3rd left spindle: 11 kW
– 4th top spindle: 15 kW
– 5th bottom spindle: 11 kW
– 6th right spindle (multi-saw): 22 kW
– 7th left spindle (multi-saw): 22 kW
– Spindle diameter: 40 mm
– Electric height adjustment
– 5 upper steel rollers
– 2 upper rubber rollers
– 3 feed rollers integrated into the table
– Pneumatic pressure system
– Table length: 1025 mm
– Central lubrication
– Feed speed adjustable via inverter: 5 - 28 m/min
– Feed motor power: 4 kW
Hedjw H Rf Ropfx Acujnu
– Extraction port diameter: 7 x 140 mm
– Total power: 110 kW, 250A
– Machine dimensions (L/W/H): 370 / 230 / 220 cm
– Weight: ~3000 kg
Weinig High Mech Feed Table:
– German-made
– Year of manufacture: 2008
TECHNICAL SPECIFICATIONS:
– Motor power: 0.75 kW
– Feed speed: up to 80 m/min
– Material width min/max: 50 - 230 mm
– Material height min/max: 12 - 100 mm
– Minimum material length: 500 mm
– 5 rows of feed chains
– Hydraulic pump power: 5.5 kW
– Feeder speed adjustment
– Overall feeder dimensions (L / W / H): 380 / 200 / 160 cm
– Weight: ~450 kg
mažas skelbimas

472 km
Lentų krautuvas
WeinigUnistack 811 Stacker
Skambinti
Sąlyga: labai geros būklės (naudotas), Weinig Unistacker Paternoster-Stapelanlage mit zusätzlicher Handhabungstechnik
Bitte überprüfen Sie Ihren Spam-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten!!!
1. Weinig Auslauf-Rollenbahn mit Ausschiebern.
2. Weinig Vorsortierstation mit 5 Bändern, Zuführung zur Paternoster-Stapelanlage.
3. Weinig 811 Unistack Paternoster-Stapelanlage mit 3 Stückleisten-Magazinen.
4. Weinig 802 Scherenhubtisch mit Rollenbahn als Zuführung zum Paket-Auslauf.
5. Weinig 812 motorisierte Auslauf-Rollenbahn.
6. Mosca Umreifungsmaschine für Packstücke.
7. Weinig Ketten-Auslaufband für Pakete.
Hjdpoxbpgasfx Acujnu
mažas skelbimas

465 km
Obliavimo ir formavimo staklės su mechanizacija
WEINIGHydromat 17 BL
Skambinti
Sąlyga: labai geros būklės (naudotas), Weinig Hydromat 17 BL Hobelmaschine mit Abstapler
Vorschub: 60 m/min
Spindeln:
1. unten – 11 kW
2. rechte Seite – 7,5 kW
Hnedpfx Aev Euy Rjcueu
3. linke Seite – 7,5 kW
4. oben – 11 kW
5. unten – 7,5 kW
6. oben – 7,5 kW
6 Ziehwalzen im Tisch
Vorschubmotor – 15 kW
Hobelbreite – 170 mm
Hobelhöhe – 120 mm
Maschine auf einem erhöhten Podest
Zustand: einwandfrei!
mažas skelbimas

999 km
Langų sistema
WEINIGUnicontrol 12
Skambinti
Sąlyga: naudotas, Slot spindle 2 units
Number of milling units: 8
Spindle diameter: 50 mm
Control: Weinig Nexus touchscreen
Weinig Unicontrol 12
-----
For sale on behalf of a customer at a favourable price
Including tooling: Leitz IV 68 / IV 78 wood, IV 68 wood-aluminium.
Machine remains in operation until approx. end of October 2025
-----
Technical manufacturer’s description:
> Slot spindles: 2
> Profile spindles: 3
> Horizontal spindles: 3
> Max. workpiece length: 4,500 mm
> Max. workpiece width: 220 mm
> Max. workpiece thickness: 120 mm
> Edge rounding unit
> CNC-controlled horizontal spindle
> Separate grooving spindle with gearbox
> Slot spindle: 640 mm
> Profile spindle: 400 mm
> Automatic upper sash support for transoms
> Synchronous spindle: 400 mm
> Grooving spindle with gearbox: 160 mm
> Total spindle stroke: 590 mm
> Spindle diameter: 50 mm
> Profile tool cutting circle: 140 mm
> Slot tool cutting circle: 300 mm
> Infinitely variable spindle stroke
> Radial spindle adjustment: NC axis, pneumatic
> Electronically controlled length stop
> Angled window
> Angle stop, mitre difference compensation
> Equipped for rebating
> Splinter protection for rebating
> Automatic counter support
> Workpiece return: longitudinal conveyor, turning station, cross conveyor
> Turning system
> Max. feed speed: 10 m/min
> Infinitely variable feed speed
> PC control
> Profile splitting
> Double piece package
> Weinig Nexus touchscreen
> Required space (length x width): 14.7 metres x 12.7 metres
-----
Including tooling: IV 68/ IV 78 wood, IV 68 wood-aluminium
-----
Price of the above machine on request
-----
Hjdpfx Aew Hg T Dscuonu
(technical specifications according to manufacturer – no guarantee!)
All prices are net, plus statutory VAT.
mažas skelbimas

472 km
Įrankių matavimo stovas
WeinigOPTICONTROL Powerlock version
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Įrankių matavimo stovas įrankio spinduliui ir aukščiui matuoti. Matavimai nuskaitomi skaitmeniniuose ekranuose.
Techninės specifikacijos:
Minimalus įrankio skersmuo – 100 mm
Maksimalus įrankio skersmuo – 300 mm
Maksimalus įrankio ilgis – 330 mm
220V – 50Hz
Hnsdpfx Aew U Sxaecuju
Svoris – 180 kg
Pateikiamas su naudojimo instrukcija.
mažas skelbimas

1 179 km
Keturios šoninės obliavimo staklės
WEINIGPowermat 400 CNC_Powerlock
Skambinti
Sąlyga: naudotas, Number of spindles: 6 pcs
Working width: 230 mm
Planing height: 120 mm
Jointing table length: 2500 mm
Feed motor: 4 kW
Feed speed: 5-30 m/min
Weinig Powermat 400 with HSK/Powerlock, CNC controlled axial/radial adjustment
-----
Machine is overhauled and function-tested!
Summary:
-----
6 spindles with 8,000 rpm
5 x HSK/Powerlock
Axial and radial CNC adjustment of spindles via control system
CNC-controlled feed adjustment and positioning
Detailed description:
-----
Technical data:
Working width: 20-230 mm
Working height: 8-120 mm
Number of spindles: 6
1. Tool holder - bottom
-----
Motor with brake: 5.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting circle: 93 - 160 mm
Axial adjustment range: 5 mm
Rabbetting device
MarathonCoating on table insert in front of 1st lower tool holder
2. Tool holder - PowerLock - right
-----
Motor with brake: 11.0 kW
Shared motor with left tool holder
Speed including high-performance bearings: 8,000 rpm
Tool cutting circle 40 mm below table level: 93 - 200 mm
Tool cutting circle 55 mm below table level: 93 - 180 mm
Tool cutting circle for straight knife heads max. 163 mm
Max. tool diameter behind fence line: 180 mm
Max. profiling depth: 35 mm
Axial adjustment range: 55 mm
Spindle CNC-controlled, axial and radial
3. Tool holder - PowerLock - left
-----
Motor with brake: Shared motor with 2nd spindle
Speed including high-performance bearings: 8,000 rpm
Tool cutting circle 40 mm below table level: 93 - 200 mm
Tool cutting circle 55 mm below table level: 93 - 180 mm
Tool cutting circle for straight knife heads max. 163 mm
Max. profiling depth: 35 mm
Axial adjustment range: 55 mm
Spindle CNC-controlled, axial and radial
4. Tool holder - PowerLock - top
-----
Motor with brake: 7.5 kW
Speed including high-performance bearings: 8,000 rpm
Tool cutting circle: 93 - 200 mm
Tool cutting circle for straight knife heads max.: 180 mm
Max. profiling depth: 35 mm
Axial adjustment range: 40 mm
Hnsdpfx Acouzaa Ssuju
Split pressure shoe in front of upper tool, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded.
Spindle CNC-controlled, radial
5. Tool holder - PowerLock - top
-----
Motor with brake: 7.5 kW
Speed including high-performance bearings: 8,000 rpm
Tool cutting circle: 93 - 200 mm
Tool cutting circle for straight knife heads max.: 180 mm
Max. profiling depth: 35 mm
Axial adjustment range: 40 mm
Split pressure shoe in front of upper tool, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded.
Spindle CNC-controlled, axial and radial
6. Tool holder - PowerLock - bottom
-----
Motor with brake: 7.5 kW
Speed including high-performance bearings: 8,000 rpm
Tool cutting circle: 93 - 200 mm
Max. profiling depth: 15 mm
Axial adjustment range: 35 mm
Spindle CNC-controlled, radial
Feed system
-----
Frequency-controlled feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min
mažas skelbimas

1 179 km
Langų sistema
WEINIGUnicontrol 6 NC Spindeln
Skambinti
Sąlyga: naudotas, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
# 2764 Weinig Unicontrol 6 with NC-controlled spindles
-----
Machine will be cleaned and completely overhauled before delivery
Technical data summary
(Please inquire regarding any additionally included accessories)
Item 1: Cross-cut saw
-----
> Electronic cross-cut saw, horizontally, steplessly adjustable
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Maximum tool diameter: 400 mm
> Motor power: 3.0 kW
> Laser guide light for detecting the cutting section
> NC length stop, mounted on slot table included
Positioning of the cross-cut saw integrated into the control
> Length: 3,500 mm
Item 2: Tenoning and slotting spindle
-----
> Number of tools: variable, adjustment stepless via NC-axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, stepless adjustment 254 mm NC-axis
> Spindle speed: 3,500 rpm
> Spindle diameter: 50 mm
> Maximum tool diameter: 320 mm
> Motor power: 11 kW
Item 3: 1st profiling spindle (climb and counter-rotation)
> Position: vertical, right
> Number of tools: 1 pc.
> Tool clamping length: 120 mm
> Spindle speed: 6,000 rpm
Hjdpfx Aovu Hfqjcuenu
> Spindle diameter: 50 mm
> Max. tool cutting circle: 232 mm
> Motor power: 7.5 kW
Item 4: 2nd profiling spindle
-----
> Position: vertical, right
> Number of tools: variable, stepless adjustment via NC-axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, stepless adjustment 254 mm NC-axis
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool cutting circle: 232 mm
> Motor power: 11 kW
2 feed rollers opposite the spindle, axially controlled by pneumatic system, 2 positions
Sash guide consists of:
Guide rail with stop (area of climb spindle)
Sash support bar from above in the area of the vertical right profiling unit
and profiling spindle
Item 5: Horizontal top profiling unit
-----
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.0 kW
> Speed: 5,850 rpm
> Max. tool cutting circle: 130 mm
> Axial adjustment path 30 mm, 8 positions via pneumatic turret
> Radial adjustment path 125 mm, 8 positions via pneumatic turret
Item 6: 3rd profiling spindle (hardware spindle)
-----
> Position: vertical, right
> Tool clamping length: 160 mm
> Axial adjustment path 115 mm, 8 positions via pneumatic turret
> Radial adjustment path 100 mm, 8 positions via pneumatic turret
> Spindle speed: 5,850 rpm
> Spindle diameter: 40 mm
> Max. tool cutting circle: 210 mm
> Motor power: 3.0 kW
Additional features
-----
> Online-capable
> Rebate bending system for splinter-free rebating
> Double part package
> Return conveyor for one-man operation: slat conveyor
> Screen control
> Angled window unit
> Electronic angle display for angled windows
> Industrial PC, PC control/NEXUS
> Weinig production program for profiles
> Supplied without processing tools
No original pictures yet available.
Images show an identical machine from our archive
-----
Price for the above machine on request!
-----
Option subject to extra charge: EUR 6,500.00
...
mažas skelbimas

1 179 km
Keturios šoninės obliavimo staklės
WEINIGPowermat 1200 EM 100 High-Mech
Skambinti
Sąlyga: naudotas, Number of spindles: 6 units
Working width: 230 mm
Planing height: 160 mm
Surface table length: 1050 mm
Feed motor: 7 kW
Feed speed: 6–40 m/min
Hnedsvnwbcepfx Acuju
Weinig Powermat 1200
-----
With infeed automation: Weinig wheel magazine EM 100 and linked with outfeed automation: Weinig High-Mech A 1
The machine will be completely refurbished at our warehouse prior to delivery!
Detailed Description:
-----
1. Weinig Planer and Moulder Powermat 1200
-----
Technical Data:
-----
Working width: 20–230 mm (with tool cutting circle 93–163 mm)
Working height: 10–160 mm (with tool cutting circle 93–163 mm)
1st Spindle
-----
First lower horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 125–180 mm
With PowerLock: 93–180 mm
Tool cutting circle for rebate cutter: 130–160 mm
Axial adjustment: 17 mm
Rebate device
MarathonCoating before 1st lower tool holder
2nd Spindle
-----
First right vertical spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–200 mm
Maximum profiling depth: 35 mm
Axial adjustment: 80 mm
Radial adjustment
Minimum tool diameter at fence level: 93 mm
Maximum tool diameter behind fence level: 200 mm
3rd Spindle
-----
First left vertical spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–200 mm
Tool circle for straight knife heads max. 163 mm
Maximum profiling depth: 35 mm
Axial adjustment: 80 mm
Pressure shoe in front of the left tool holder, incl. 2 side-mounted, spring-loaded pressure rollers
4th Spindle
-----
First upper horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–200 mm
Tool circle for straight knife heads max. 163 mm
Maximum profiling depth: 35 mm
Axial adjustment: 40 mm
Split pressure shoe in front of the upper tool holder, adjustable for tool cutting circle and pivotable away from the tool, spring-loaded.
Upper spindle prepared for subsequent cassette system installation
5th Spindle
-----
Second upper horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–200 mm
Tool circle for straight knife heads max. 163 mm
Maximum profiling depth: 35 mm
Axial adjustment: 40 mm
Split pressure shoe in front of the upper tool holder, adjustable for tool cutting circle and pivotable away from the tool, spring-loaded.
Upper spindle prepared for subsequent cassette system installation
6th Spindle
-----
Second lower horizontal spindle
Motor with brake: 7.5 kW
Spindle diameter: 50 mm
Speed: 8,000 rpm
Tool cutting circle: 93–225 mm
Maximum profiling depth: 15 mm
Axial adjustment: 40 mm
Radial adjustment
Minimum tool diameter at table level: 93 mm
Maximum tool diameter 6 mm below table level: 225 mm
All spindles designed for high concentricity.
Lubrication points for axial tool holder adjustment.
Feed system
-----
Electronic feed, infinitely variable with brake 6–40 m/min, motor 7 kW
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

mažas skelbimas

1 179 km
Keturios šoninės obliavimo staklės
WEINIGPowermat 500 Fenster
Skambinti
Sąlyga: naudotas, Number of spindles: 6 units
Working width: 230 mm
Planing height: 120 mm
Surface table length: 2500 mm
Feed motor: 4 kW
Feed speed: 5–30 m/min
Control system: Weinig PowerCom
Weinig Powermat 500 for window production
-----
Machine has been overhauled and function-tested
Brief summary:
-----
6 spindles with 8,000 rpm and 7.5 kW each
including 5 x HSK/Powerlock spindles
Window package with glazing bead separation
Spindles CNC-controlled axially and radially
Right and top spindles with joint pneumatic cycling for glazing bead separation
Large PowerCom control with touchscreen
Detailed description:
-----
Tool configuration no. 018 for window manufacturing
Technical data:
-----
Working width: 20–230 mm (with tool cutting circle 93–125 mm)
Working height: 8–120 mm (with tool cutting circle 93–125 mm)
1st Tool Holder
-----
First lower tool holder
Motor with brake, 7.5 kW
Diameter: 40 mm
Speed: 8,000 rpm
Including high-performance ball bearings
Tool cutting circle: 125–180 mm
With PowerLock: 93–180 mm
Axial adjustment range: 17 mm
Hardened table insert before 1st lower tool holder
2nd Tool Holder POWERLOCK/HSK
-----
First right-hand tool holder
Motor with brake, 7.5 kW
Speed: 8,000 rpm
Including high-performance ball bearings
Tool cutting circle: 93–200 mm
Max. profiling depth: 35 mm
Axial adjustment range for spindle: 80 mm
Axial adjustment range for PowerLock: 55 mm
Radial adjustment range
Min. tool diameter at reference level: 93 mm
Max. tool diameter beyond reference level: 200 mm
CNC-controlled axially and radially
3rd Tool Holder POWERLOCK/HSK
-----
First left-hand tool holder
Motor with brake, 7.5 kW
Speed: 8,000 rpm
Including high-performance ball bearings
Tool cutting circle: 93–200 mm
Tool cutting circle for straight cutterheads max. 163 mm
Max. profiling depth: 35 mm
Axial adjustment range for spindle: 80 mm
Hjdevf Raaspfx Acusnu
Axial adjustment range for PowerLock: 55 mm
Pressure shoe in front of left tool holder,
Including 2 side pressure rollers, spring-loaded
CNC-controlled axially and radially
4th Tool Holder POWERLOCK/HSK
-----
First top tool holder
Motor with brake, 7.5 kW
Speed: 8,000 rpm
Including high-performance ball bearings
Tool cutting circle: 93–200 mm
Tool cutting circle for straight cutterheads max. 163 mm
Max. profiling depth: 35 mm
Axial adjustment range: 40 mm
CNC-controlled axially and radially
5th Tool Holder POWERLOCK/HSK
-----
Second top tool holder
Motor with brake, 7.5 kW
Speed: 8,000 rpm
Including high-performance ball bearings
Tool cutting circle: 93–200 mm
Tool cutting circle for straight cutterheads max. 163 mm
Max. profiling depth: 35 mm
Axial adjustment range: 40 mm
CNC-controlled axially and radially
6th Tool Holder POWERLOCK/HSK
-----
Second lower tool holder
Motor with brake, 7.5 kW
Speed: 8,000 rpm
Including high-performance ball bearings
Tool cutting circle: 93–225 mm
Max. profiling depth: 15 mm
Axial adjustment range: 40 mm
Radial adjustment range
Min. tool diameter at table level: 93 mm
Max. tool diameter 6 mm below table level: 225 mm...
mažas skelbimas

1 179 km
Langų sistema
WEINIGUnicontrol 12 NC
Skambinti
Sąlyga: naudotas, Grooving spindle 2 pcs.
Number of milling units: 7 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
Weinig Unicontrol 12
with radial and axial NC spindles, plus VARIO table and trimming carriage
.....
Machine professionally dismantled and in stock at our warehouse in 73447 Oberkochen.
Video and photos were taken before dismantling.
Technical Data Summary
(Please inquire about any additionally included accessories)
.....
Cross-cut saw
.....
> Cross-cut saw electronic, horizontally infinitely adjustable
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Maximum tool diameter: 400 mm
> Motor power: 3.7 kW
> Laser guideline for cutting section recognition
> Axial adjustment travel: 150 mm NC axis, electronically infinitely adjustable
> Radial adjustment travel: pneumatic, 8 positions for e.g. top edge rounding
Rounding unit
.....
> Position: horizontal, bottom
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
> Tool clamping length: 25 mm
> Spindle speed: 9,000 rpm
> Maximum tool diameter: 130 mm
> Axial adjustment mechanically linked to cross-cut saw
> Radial adjustment pneumatically controlled On/Off
electronic length stop
.....
> Length: 4500 mm
1st Tenoning and Grooving Spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment travel: 580 mm NC axis, infinitely adjustable
> Spindle speed: 2,800 rpm
> Maximum tool diameter: 400 mm
> Anti-spin counter, full clamping length is countered
2nd Tenoning and Grooving Spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment travel: 580 mm NC axis, infinitely adjustable
> Spindle speed: 2,800 rpm
> Maximum tool diameter: 400 mm
Hsdpfxevu Hdyo Acusnu
> Anti-spin counter, full clamping length is countered
Transfer belt
.....
For transferring parts to the longitudinal processing unit, including
double-part singulation before infeed into the longitudinal processing.
1st Profiling Spindle (Climb and Counter Direction)
.....
> Position: vertical, right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment travel: 350 mm NC axis, infinitely adjustable
> Radial adjustment travel: 80 mm NC axis, infinitely adjustable
> Spindle speed: 6,000 rpm
> Min. tool cutting circle: 140 mm
> Max. tool cutting circle: 232 mm
> 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions
> Table plate pneumatically controlled to tool diameter
2nd Profiling Spindle
.....
> Position: vertical, right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment travel: 350 mm NC axis, infinitely adjustable
> Radial adjustment travel: 80 mm NC axis, infinitely adjustable
> Spindle speed: 6,000 rpm
...
mažas skelbimas

1 179 km
Keturios šoninės obliavimo staklės
WEINIGVariomat_Multifunktionstisch
Skambinti
Sąlyga: naudotas, Number of spindles: 5 pcs.
Working width: 20 - 230 mm
Planing height: 8 - 120 mm
Length of jointer table: 2000 mm
Feed motor: 1.1 kW
Feed speed steplessly adjustable: 2 - 12 m/min
1 WEINIG Planing and Moulding Machine VARIOMAT incl. multifunction/slotting table
-----
Machine will be cleaned and functionally tested before delivery
Technical Manufacturer's Description:
-----
Working width: 20 - 230 mm
Working height: 8 - 120 mm
1st spindle horizontal bottom
-----
Motor with brake: 5.5 kW
Diameter: 40 mm
Speed: 6000 rpm
Tool circle: 125 - 145 mm
Axial adjustment: 5 mm
Rabbetting device incl. rebate cutter
MarathonCoating for table insert before and after 1st bottom spindle
2nd spindle vertical right
-----
Motor with brake: 11 kW
Shared motor with left vertical spindle
Diameter: 40 mm
Speed electronically adjustable: 3000 - 6000 rpm (for 11 kW/15 HP)
Tool circle for longitudinal machining: 93-232 mm
Minimum tool diameter at fence level: 93 mm
Maximum tool diameter behind fence level: 180 mm
Maximum profile depth: 45 mm
Axial adjustment: 30 mm
Insert segment incl. additional fence lip 125 mm
Insert segment incl. additional fence lip 150 mm
3rd spindle vertical left POWERLOCK/HSK
-----
Shared motor with 1st right spindle
PowerLock tool holding system
Shared speed with right vertical spindle
Tool circle for longitudinal machining: 93-232 mm
Maximum profile depth: 45 mm
Minimum profile depth with tool circle 200 mm: 20 mm
Axial adjustment under table: 30 mm
Insert segment 125 mm
Insert segment 150 mm
4th spindle horizontal top
-----
Motor with brake: 5.5 kW
Diameter: 40 mm
Speed: 6000 rpm
Tool circle: 125-200 mm
Maximum profile depth: 30 mm
Minimum profile depth with tool circle 200 mm: 20 mm
Axial adjustment: 30 mm
Glazing bead discharge after top spindle
5th spindle second horizontal bottom
-----
Motor with brake: 4 kW
Diameter: 40 mm
Speed: 6000 rpm
Tool circle: 125-200 mm
Maximum profile depth: 15 mm
Axial adjustment: 10 mm
Machine operation
-----
Both axes of all spindles—except the 1st lower spindle—are equipped with mechanical digital readouts.
Central radial adjustment with mechanical digital readout of feed, together with pressure ahead of the top spindle. Pressure after the top spindle adjustable separately.
Memory function
-----
Hnsdpowugpbsfx Acueu
For storing the setting values of profiles
Tool holding axes and pressure elements before and after the top tool holder with electronic dual displays:
Function:
- Saves the setting values of the machined profile at the touch of a button under a profile number
- Upon reselecting the profile number, the electronic dual displays indicate the setting values
- By manually adjusting the tool holders and pressure elements, the displays are aligned
- 99 memory slots
3 axially CNC-controlled adjustment and positioning of the spindles in combination with memory function. For spindles no. 2, 3, 4
3 radially CNC-controlled adjustment and posit...
mažas skelbimas

1 179 km
Keturios šoninės obliavimo staklės
WEINIGPowermat 600 Compact
Skambinti
Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs.
Working width: 230 mm
Planing height: 120 mm
Surface table length: 2,500 mm
Feed motor: 4 kW
Feed speed: 5-30 m/min
Control: Memory function
Weinig Powermat 600 Compact
-----
Machine is cleaned and fully inspected.
Brief summary:
-----
- 5 spindles
- Powerful motors
- Left and top spindle controlled for width and height
Detailed description:
-----
Technical data:
Working width: 20-230 mm
Working height: 10-120 mm
Number of spindles: 5
1st spindle - bottom
-----
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle diameter: 125 - 145 mm
Tool circle diameter with rebate cutter: 130 - 160 mm
Axial adjustment range: 5 mm
Rebate device
MarathonCoatin for table insert in front of the 1st lower tool holder
Electronic digital readout for radial adjustment
2nd spindle - right
-----
Motor with brake: 11.0 kW
Shared motor with left tool holder
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle diameter 40 mm below table level: 93 - 200 mm
Tool circle diameter 55 mm below table level: 93 - 180 mm
Tool circle diameter for straight knife cutterheads max.: 163 mm
Max. tool diameter behind fence line: 180 mm
Max. profiling depth: 35 mm
Axial adjustment range: 55 mm
Hsdpowzmu Rofx Acuenu
3rd spindle - left
-----
Motor with brake: Shared motor with the 2nd spindle
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle diameter 40 mm below table level: 93 - 200 mm
Tool circle diameter 55 mm below table level: 93 - 180 mm
Tool circle diameter for straight knife cutterheads max.: 163 mm
Max. profiling depth: 35 mm
Axial adjustment range: 55 mm
Radial spindle CNC-controlled
4th spindle - top
-----
Motor with brake: 11.0 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle diameter: 93 - 200 mm
Tool circle diameter for straight knife cutterheads max.: 180 mm
Max. profiling depth: 35 mm
Axial adjustment range: 40 mm
Radial spindle CNC-controlled
Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded.
Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom
5th spindle - bottom
-----
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool circle diameter: 93 - 200 mm
Max. profiling depth: 15 mm
Axial adjustment range: 35 mm
Feed system
-----
Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min
Infeed roller before 1st lower tool, pneumatically controlled up/down.
Durofer pointed tooth rollers with depth limiter and self-cleaning.
Adjustment range of feed rollers relative to left tool holder, axial 35 mm
Machine electrics
-----
Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz.
All spindles IE 2 version
Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account.
Mach...
Palengviname jums paiešką: "weinig profimat 23"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Weinig Profimat 23 (473)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Weinig Hydromat 23
- Weinig Powermat 1200
- Weinig Powermat 2000
- Weinig Powermat 2400
- Weinig Powermat 400
- Weinig Powermat 500
- Weinig Profimat
- Weinig Profimat 22
- Weinig Profimat 22 N