Viena Ant Kitos Uždedamose pirkti naudotą (20 909)

Sąlyga: naudotas, Techniniai duomenys: Spaudimas: 160 t Stūmoklio eiga: 32...140 mm Eigos dažnis: 50 eigų/min Įdėjimo gylis: 400 mm Montavimo aukštis: 400 mm Stūmoklio slankiklio reguliavimas: 100 mm Stalo matmenys: 1000x750 mm (be tvirtinimo plokščių) Stūmoklio paviršius: 850x630 mm Sriegio skylė: 400x360 mm Bendra galia: 15,5 kW Mašinos svoris apie: 10,5 t Matmenys (I-P-A): valdymo spintos – 1,06x0,6x2,0 m Matmenys (I x P x A): I:2,9 x P:1,25 x A:3,3 m - Galimas tiek vienkartinis, tiek nuolatinis darbas - 2 tvirtinimo plokštės (1200x760x90 mm ir 1200x760x70 mm, sriegio skylės Ø=300 mm) - Galimas valdymas koja arba ranka - Paskutinė patikra atlikta 2006 m. Pjdpfx Afeu N Dfho Nsgg - 80A; suslėgtas oras 6 kp/cm²; alyvos tūris apie 30 litrų Vidinėje būklėje.

Sąlyga: naudotas, Technical details: Pressure: 63 t Frame opening: 900 mm Strokes per minute: approx. 75 spm Ram adjustment: 80 mm Adjustable stroke range: 3–100 mm Table size: 900 x 600 mm Pgsdpfxeu Nfnkj Af Njg Throat depth: 310 mm Installation height: max. 350 mm Drive power: 11 kW Voltage: 380/220/24 V Frequency: 50 Hz Operating pressure: approx. 150 bar Oil capacity: 500 l Safety distance: 150 mm Pass-through opening in table: 200 mm Total power requirement: 11 kW Machine weight approx.: 4.0 t Space requirements approx.: L: 1.8 x W: 1.8 x H: 3.7 m DIFFERENTIAL TRAVEL PRESS HIGH-SPEED PRESS - High-performance high-speed press, C-frame design - Pneumatic connection: approx. 5 bar WITHOUT control cabinet!

Sąlyga: naudotas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Installation height with clamping plate ram/top: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Pass-through opening in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Pin hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total connected load: 1.1 kW Pgodpfxsu Nfwlo Af Neg Machine weight approx.: 0.5 t Machine dimensions approx. LxWxH: 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test up to 2.3 t performed. Good condition.

Sąlyga: naudotas, Gamybos metai: 1992, Technical Details: Load capacity: 10 t Span: 21,000 mm Lifting speed: 6.3 m/min Creep (fine lift) speed: 1.0 m/min Rope diameter: 14 mm Connected load: 15.5 kW Podjv N Ib Nepfx Af Nogg SINGLE-GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane carriage: Designation RF 400; Type KBF 112 A8/2, travel speed 12.5 / 50.0 m/min, and type KBF 80 A4, travel speed 2.5 m/min. Size of the 16 wheel sets: Ø 200 mm Trolley (main lift): EKDH 525 H20 KV3-4/1 F6; Type KBF 80 A8/2; speed 20.0 / 5.0 m/min; 4 wheel sets: Ø 160 mm Hoisting gear: Type KBH 160 B2/12; lifting height 10,000 mm; with braking and traversing runner; lifting speed (main lift 6.3 m/min and creep lift 1.0 m/min) Single hook size 5.0 Rope Ø 14 mm; rope length 46 m; mechanism classification FEM 1 AM Operation via pendant pushbutton control with DST Special feature: Traversing section with locking mechanism and branch tracks Additional bridge cranes with a 21 meter span are available for sale.

Sąlyga: naudotas, Gamybos metai: 1991, Technical Details: Pressure: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through hole in table: 4x Ø62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram surface: 450 x 850 mm Pin hole in ram: 49 mm Height above floor: 810 mm Pjdpfx Afjw D Awms Nogg Total power requirement: 17 kW Machine weight approx.: 7,200 kg Approx. dimensions (LxWxH): 2.1 x 1.4 x 3.4 m

Sąlyga: naudotas, Gamybos metai: 1980, Technical Details: Pressure: 400 t Stroke: 40 - 140 mm Strokes per minute, continuous: 32 Throat depth: 400 mm Installation height, min/max: 450/590 mm Ram adjustment: 125 mm Pgedsu N A Uuopfx Af Njg Table size: 1250x750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate L:1260 x W:760 x H:100mm - With drawing device, force 250 kN, stroke approx. 83mm - Operation via control panel No UVV (accident prevention regulations) As is (i.D.).

Sąlyga: naudotas, Gamybos metai: 1980, Techninės detalės: Slėgis: 160 t Eigos ilgis: 20-160 mm Įtraukos gylis: 400 mm Stūmoklio reguliavimas: 120 mm Smūgių skaičius: 71 smūgis/min Įrengimo aukštis: stalas/stūmoklis viršuje: 720 (esant 160 mm eigai) mm Įrengimo aukštis: stalas/stūmoklis apačioje: 560 (esant 160 mm eigai) mm Stūmoklio paviršius: 900 x 660 mm Praėjimas tarp stulpų: 500 x 450 mm Stalo matmenys: Ilgis x Plotis x Skersmuo: 1200 x 750 x 100 mm Bendras galios poreikis: apie 23,0 kW Mašinos svoris apytiksliai: apie 15,0 t Mašinos matmenys apytiksliai (Ilgis x Plotis x Aukštis): 2,7 x 1,5 x 3,45 m Valdymo spintos matmenys (Ilgis x Plotis x Aukštis): 2,0 x 0,65 x 2,15 m Valdymas per valdymo pultą/pjedestalą/pedalą ir rankinį valdymo įrenginį. Presas siūlomas pagal dvi parinktis. 1 parinktis: Parduodama esamos būklės, neprijungta, neišsami, neveikianti. Podju N A U Iepfx Af Nsgg 2 parinktis: Presas bus pilnai atnaujintas – visi komponentai bus pakeisti, atnaujinti ir patikrinti. Presas bus paruoštas naujam naudojimui. Prašome užklausose dėl šio preso nurodyti pageidaujamą pasiūlymo variantą!

Sąlyga: naudotas, Gamybos metai: 1995, Technical Details: Load capacity: 3.2 t Lift: - mm Span: 5300 mm Lifting speed: 5.0 m/min Rope diameter: 6.5 mm Creeping speed: 0.80 m/min Electrical controls: yes Max. hook height: 6 m Hook travel: 6000 mm Total power requirement: 13.6 kW Approx. machine weight: 5.3 t Transport dimensions (LxWxH): approx. 6.8 x 2.35 x 1.5 m (with 4 pallets) Crane classification: DIN 15018 H2 B3 Crane end carriage: - Drive unit number: GE 1348 - Mechanism group: 1Am - 4x wheels, wheel diameter: 100 mm - Micro-travel speed: 5.0 m/min - Travel speed: 20.0 m/min - Disc brake Trolley drive: - Speed: 20.0 / 5.0 m/min - Power: 0.12 / 0.03 kW Hoisting unit Abus - FDB GM 800.3H06/S12873E – Load capacity: 3200 kg - Speed: 5.0 / 0.80 m/min Psdpfx Aswm Ivtef Nogg - Power: 3.20 / 0.45 kW (50% ED) - Hook travel: 6.0 m - Rope Ø 6.5 mm Floor operation via pushbutton control, electric As per specification.

Sąlyga: naudotas, Techninės detalės: Spaudimas: 90 t Iškyša: 320 mm Smūgių skaičius: 90 smūg./min Įrengimo aukštis: Stalas/stūmoklis viršuje: apie 380 mm Stūmoklio reguliavimas: maks. 65 mm Pgedou Nfg Hopfx Af Nsg Stūmoklio paviršius: 600x55 mm Tvirtinimo plokštė ant stalo: 800x640x80 mm Pereinimas: 260x160 mm Eigos reguliavimas: 60 fiksuota mm Bendras galios poreikis: 5,5 kW Mašinos svoris apie: 4500 kg Reikalinga erdvė apie: I:1,8xP:0,82xA:2,42 m - Vienkartinis/pastovus eigos režimas - Atliktas reguliarus patikrinimas, restauruota 2010 m. - Šiuo metu be valdymo skydelio, be valdymo sistemos, be suslėgto oro bako

Sąlyga: naudotas, Gamybos metai: 1983, Technical Details: Pressing force: 100 t Stroke: 20 mm fixed Strokes per minute: 55 Table size: 900 x 640 mm Throat depth: 355 mm Pgjdpfx Aou Nfi Usf Njg Ram adjustment: 150 mm Ram bore diameter: Ø 36 mm Ram clamping surface: 500 x 415 mm Height above floor: 800 mm Maximum distance between table and ram: 390 mm Passage opening in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions (LxWxH): 1.9 x 1.6 x 3.1 m The press is supplied without machine control panel / switchgear cabinet. (Optional installation possible) Complete separate electric drive for 3x 380 Volt, 50 Hz Belt and ram guards PRESSMATIC friction clutch and brake unit

Sąlyga: naudotas, Technical details: Pjdpfxsu U D I Ro Af Nogg Pressing force: 25 t Clearance between uprights: 360 mm Stroke: 500 mm Installation height, table/ram at top: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.200 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Ram clamping surface: 450 x 360 mm Pin hole in ram: Ø 32 x 72 mm Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control console (single-hand operation possible in setup mode) Continuous and single stroke modes TÜV certified until 05/2024 i.D. *

Gamybos metai: 1992, Sąlyga: naudotas, Technical Details: Load capacity: 12.5 t Span: 9000 mm Lifting speed: 5 / 0.8 m/min Rope diameter: 14 mm Lifting height (max. hook position): 10,000 mm Total power requirement: 13.6 kW Approx. machine weight: 5.2 t Dimensions (L x W x H): Bridge: approx. 10.3 x 2.2 x 2.3 m (3.15 t) Dimensions (L x W x H): End carriage No.1: approx. 4.38 x 0.8 x 0.7 m (1.01 t) Dimensions (L x W x H): End carriage No.2: approx. 4.38 x 0.8 x 0.7 m (0.99 t) Dimensions (L x W x H): Accessory pallet: approx. 4.2 x 0.8 x 0.4 m (0.16 t) Crane classification according to DIN 15018 H2B3 Crane chassis: DEMAG designation RF 400; Type KBF 100 A8/2; travelling speed 12.5 / 50 m/min; wheel diameter Ø 200 mm (16 pcs.) Trolley main hoist EKDH 532 H20 KV3-4/1 F6; Type KBF 90 A8/2; travelling speed 5 / 20 m/min; wheel diameter Ø 160 mm (4 pcs.) Hoist DEMAG DH5 32; lifting height 10,000 mm; braked with traversing runner; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety catch Podovbh Rhspfx Af Nsgg Rope Ø 14 mm; Rope length: 46 metres; mechanism group 1Bm Bridge Running gear and electric conductor rail Pendant control and radio remote control The crane is stored dismantled. *

Sąlyga: naudotas, Gamybos metai: 1986, Technical details: Pressure: 63 t Stroke rate: 65 / 130 strokes/min Throat depth: 315 mm Pgedpfou N Dafsx Af Neg Ram adjustment: 60 mm Ram stroke: 10 - 105 mm Distance table / ram: 335 mm Clearance between uprights: 355 mm Clamping plate: 800 x 610 x 85 mm Ram surface: 450 x 280 mm Compressed air: 9 bar Control voltage: 24V / 50Hz Total power requirement: 7.5 kW Approx. machine weight: 5.9 t Approx. machine dimensions LxWxH: 1.42 x 1.8 x 2.6 m Press equipped with a tilting frame (25°) and combined single and stroke safeguard (overload protection). Available operating modes: Single stroke by foot pedal (slow/positioning mode) and/or by hand control (slow) Continuous stroke by foot pedal (slow and fast) and/or by hand control (slow and fast)

Sąlyga: naudotas, Technical Details: Pressing force: 25 t Pedpfx Afjvc Awxo Nsgg Stroke: 500 mm Installation height: table/ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Table opening: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Machine weight approx.: 2.2 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and single-hand operation in setup mode) Continuous and single stroke operation

Sąlyga: naudotas, Gamybos metai: 1969, Techninės detalės: Slėgis: 55 t Gylio ilgis: 250 mm Eigos dažnis: 120 eigų/min Podpfx Afjxu Dwmo Negg Įrengimo aukštis (stalas/kumštis viršuje): 380 mm Kumščio reguliavimas: 55 mm Lakštinės medžiagos storis per einamąją eigą: 2,25 mm Kumščio eigos diapazonas: 6 - 90 mm Bendras galios poreikis: 8,8 kW Mašinos svoris apie: 2,75 t Matmenys I x P x A: 1,4 x 1,2 x 2,2 m

Sąlyga: naudotas, Techninės detalės: Spaudimas: 160 t Iškyša: 760 mm Stūmoklio eiga: 32...140 mm Atstumas tarp stalo ir stūmoklio: 400 mm Stūmoklio reguliavimas: 100 mm Eigos dažnis: 50 eigų/min Stalas: 760x1000x95 mm Pralaidumo anga stale: 400x350 mm Stūmoklio tvirtinimo paviršius: 630x850 mm Tvirtinimo plokštė: 760x1010x92 mm Bendras galios poreikis: 15 kW Apytikslis mašinos svoris: 6,2 t Pjdpfx Afou Nfhqo Nsgg Mašinos matmenys (IxPxA): 2,9x1,2x3,4 m Valdymo spintos matmenys (IxPxA): 0,8x0,45x2,1 m Valdymas per dviejų rankų valdymą Mašiną galima demonstruoti gyvai. i.D. *

Sąlyga: naudotas, Gamybos metai: 1991, Technical specifications: Pressure: 40 t Installation height: Table/ram upper position: 450 mm Throat depth: 375 mm Ram stroke: max. 300 mm Pgedpfju Nfp Isx Af Nog Table size: 900 x 500 x 85 mm Table opening: Ø 120 mm Height above floor: 900 mm Total power requirement: 15.0 kW Machine weight approx.: 5.8 t Machine dimensions (LxWxH) approx.: 2.3 x 1.45 x 2.40 m The press features a welded frame and is designed according to static calculations. (Information provided by manufacturer) The pump unit is equipped with a three-stage pump system (high pressure pump, low pressure pump, and control pump). Additional technical data: - Ram plate dimensions (W x D): 900 x 500 mm - Pin hole in ram: Ø 40 x 75 mm - Hydraulics: Tank capacity approx. 500 liters; operating pressure 275 bar; pump capacity 22.9 l/min. - Overrun distance: 7 mm - Overrun time: 58 ms - Single stroke and automatic cycle - Light barrier (can be overhauled as an option) Two-hand control and/or control panel

Sąlyga: naudotas, Gamybos metai: 1960, Technical Details: Pressure: 10 t Throat depth: 255 mm Maximum ram stroke: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height (table/ram up): 630 mm Installation height (table/ram down): 230 mm Table clamping surface: 420 x 400 mm Table through-hole: 220 mm Ram clamping surface: 200 x 200 x 65 mm Pgjdsu Nfudopfx Af Njg Total power requirement: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions approx. (LxWxH): 1.1 x 0.5 x 2.1 m

Sąlyga: naudotas, Gamybos metai: 1992, Technical Details: Load capacity: 2.0 t Lifting height at highest hook position: 2.3 m Hook travel: max. 3000 mm Wheelbase: 520 mm Total power requirement: 2.3 kW Pgedpfx Aeu Nvgdof Nsg MONORAIL system with electric trolley incl. pendant control Crane with girder and electrified rail: - Double T-beam 200 x 200 mm, length approx. 10,100 mm, travel distance 9,000 mm - Hoist, steel, capacity 2000 kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, gauge 200 mm, axle distance 520 mm, chain hoist, hook - Pendant control panel - Various mounting brackets

Sąlyga: naudotas, Technical details: Pressing force: 100 t Installation height (table/ram top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size: 750 x 560 x 90 mm Table opening (diameter): Ø 26 mm Ram clamping surface (WxD): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor: 720 mm Total power requirement: 17.0 kW Podpfx Afovc Ax Nj Negg Machine weight approx.: 5.5 t Approx. machine dimensions (LxWxH): 1.8 x 1.2 x 3.2 m

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Šis HONESS V250-3000 buvo pagamintas 2002 m. Tai vamzdžių ir profilių perforavimo staklės, turinčios savaime centruojantį gaminio spaustuvą ir keičiamus spaustuvus įvairių tipų vamzdžiams. Ji gali apdoroti iki 100 mm pločio ir 80 mm aukščio vamzdžius, o didžiausias perforavimo skersmuo yra 40 mm. Idealiai tinka greitam perforavimui, kai vežimėlio važiavimo greitis yra 40 m/min. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. • Ruošinio prispaudimas: • Savaime centruojantis gaminio spaustukas, užspaudžiantis vamzdį iš išorės • Keičiamos spaustuvinės žnyplės skirtingiems vamzdžių / profilių tipams • Reguliuojama spaustuvo padėtis, kad būtų galima tiksliai išlyginti • Ruošinio matmenys: • Didžiausias gaminio plotis (vienpusis perforavimas): 100 mm • Didžiausias gaminio aukštis (vienpusis perforavimas): 100 mm: 80 mm. • Didžiausias gaminio aukštis (per skyles): 60 mm • Didžiausia gaminio spaustuvų eiga: 3 100 mm • Mažiausias atstumas nuo vamzdžio galo iki pirmosios perforuojamos skylės: 30 mm • Perforavimo pajėgumas: 1: • Didžiausias perforavimo skersmuo (tiekiamas, per skyles): Ø40 mm. Psdpfoycfytjx Af Nogg • Perforavimo stotis: Vieno vertikalaus perforavimo cilindro • Didžiausia perforavimo jėga: 250 kN, esant 220 bar darbiniam slėgiui • Maksimali vertikali perforavimo cilindro eiga: 80 mm • Našumas: 1: • Maksimalus smūgių skaičius per minutę: Priklauso nuo cilindro eigos nustatymo ir skylės žingsnio. • Griebtuvo vežimėlio važiavimo greitis: apie 40 m/min. • Pozicionavimo pasikartojamumas: ±0,1 mm • Mašinos dydis ir diapazonas: • Perforatoriaus darbo nuotolis: > 3,10 m • Atraminio stalo ilgis: 3,00 m

Sąlyga: naujas, galia: 110 kW (149,56 AG), bendras svoris: 6 000 kg, kuro tipas: dyzelinas, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 6, krovinių skyriaus plotis: 1 800 mm, krovimo vietos ilgis: 3 000 mm, krovos erdvės aukštis: 400 mm, Gamybos metai: 2025, bendras plotis: 1 700 mm, bendras aukštis: 2 000 mm, sėdimų vietų skaičius: 3, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), oro kondicionavimas, suodžių filtras,

Sąlyga: naudotas, Gamybos metai: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clearance between frame uprights: 590 mm Podpfsvuun Tex Af Negg Shut height: 690 mm Table size: 1500 x 880 mm Pass-through opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading operations and automatic operation in accordance with CE standards Equipped with infinitely variable drive, safety light curtain (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic drawing cushion in the table (20 t), motorized central lubrication, operator panel with two-hand control Clear space between tie rods: 940 mm Side opening: 900 mm

Sąlyga: naudotas, Gamybos metai: 2007, Pressure: 63 t Stroke: 8 - 120 mm Stroke rate: 40 - 120 strokes/min Pjdpfx Afjwc U Ine Nsgg Throat depth: 280 mm Clearance between frame walls: 325 mm Shut height: 440 mm Table size: 820 x 580 mm Pass-through hole in table: 200 mm Table height above floor: 830 mm Ram surface: 470 x 340 mm Ram adjustment: 100 mm Drive power: 4.0 kW Weight: 5.2 t Space requirements (W x D x H): 1.3 x 1.8 x 2.8 m Approved for manual insertion in accordance with CE standards Equipped with infinitely variable drive, pneumatic clutch/brake combination, light barrier (Sick), hydraulic overload protection, pneumatic ram counterbalance, manual stroke adjustment, manual ram adjustment, central lubrication, fixed table, two-hand and foot operation

Sąlyga: naudotas, Gamybos metai: 1978, Pressure 050 t Reach 250 mm Stroke 8 - 120 mm Strokes per minute 100 /min Distance table/ram, large stroke at top, adjustment at top 400 mm Table size 650 x 515 mm Pjdovut E Dspfx Af Nogg Through hole in table 115 mm Table height above floor 790 - 1020 mm Table adjustable 230 mm Ram surface 390 x 180 mm Ram adjustment 70 mm Drive power 2.0 kW Weight 2.6 t Space required (W x D x H) 1.1 x 1.4 x 2.2 m Only approved for use with safety tools or fixed guards in accordance with German accident prevention regulations (UVV) with motor, flywheel clutch, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot pedal operation Can be inspected in running condition at our warehouse