Vibo Varžtas pirkti naudotą (82)

Sąlyga: labai geros būklės (naudotas), Ball screw with nut, roller screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded bar -Manufacturer: WARNER ELECTRIC -Screws are unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm Gedpfx Aced Iqqieuokc -Overall length: 680 mm -Quantity: 2 pieces available -Price: per piece -Weight: 6.8 kg

Sąlyga: geras (naudotas), WSM Stationary Screwdriving Unit / Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is enclosed by a protective housing. The service doors are equipped with monitoring switches and interlocks (locking mechanisms). The doors are locked during automatic operation and can only be opened during an automatic stop or in manual mode after pressing the door release button on the control panel. When the door is open, automatic operation cannot be started. Functional Sequence: The station is loaded via the transfer belt with the pre-assembled unit. Below are the operating steps of the automatic station during the processing of a workpiece carrier (WT). In normal operation, all 3 stations operate in parallel. - Positioning of the WT with the pre-assembled unit in St.2.1 Gkedpjibichefx Acuec - Lowering the carrier with the scanner and vision sensor - Scanning of 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the conveyor - Positioning the WT with the pre-assembled unit in St.2.2 - Positioning the screwdriver and screwing the front PCB - Lowering the WT onto the conveyor - Positioning the WT with the pre-assembled unit in St.2.3 - Lowering the light protection hood and contacting, positioning the carrier with the test sensors from below - Type-dependent testing of the lighting for SD and CD slots and buttons - Functional test of the CD eject button - Lowering the WT onto the conveyor > continue If errors occur during testing, they are displayed on the screen and can be rectified if possible. To do this, switch to manual mode and open the doors. After repair and restarting the automatic mode, the WT in the station is tested again. If a repair is not possible (e.g. screwdriving error), the WT is marked as NOK in the control system and is not further processed. Manual NOK marking and ejection is also possible. Additional assembly stations, new and used, can be found in our shop! International shipping costs on request!

Sąlyga: naudotas, Hexagon bolt DIN 933 with full thread up to the head Godpfx Aovimtdjcujkc M36 x 300 mm overall length – zinc-plated Property class 10.9 Hex head – width across flats 55 mm Thread pitch 4 mm – metric ISO thread Weight 2.5 kg *- 110 pieces in stock – unit price -* Sale in lots of 10 pieces

Sąlyga: naudotas, Gericke dosing machine, dosing screw Manufacturer: Gericke Type: DIW - U - 132 - 150 Equipped with weighing system and control cabinet (operational status unknown) Comes with stainless steel frame suitable for big bag or container with butterfly valve See our other advertisements Gsdpfowyfvwjx Acuokc VMA Wekerom

Gamybos metai: 1980, Sąlyga: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 2489, Stock No. 2489 1 used, function-tested single-screw extruder, ready for demonstration Manufacturer: KUHNE Germany Type: ES 60-24 Screw diameter: 60 mm – 24 L/D Feed zone cooled Screw speed up to 100 rpm Drive: 25.5 kW – 63 A – DC 4 cylinder heating zones with blower cooling 3 head heating zones Control cabinet and operator panel Geded Sg Hcspfx Acuekc The machine is ready for demonstration; a test run with your material can be arranged at short notice at our Wuppertal facility upon agreement. Accessories such as screen changers, pelletising equipment, etc. are available at extra cost; details on request. Further extruders available from stock—visit us or request our current machine stock list.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Cretors Flothru FTCC12 Schraubenüberzugsmaschine Gkedowvbtqopfx Acuec Seriennummer: 17031051 Baujahr 2017, Edelstahl-Schraubenüberzugsmaschine, Schneckenlänge 3200 mm, Schneckenbreite 300 mm, Schnecke befindet sich in einem doppelwandigen Behälter, zuvor in einer Karamell-Popcorn-Linie eingesetzt, 3-phasig

Sąlyga: naudotas, Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, ball screw drive, linear bearing, precision ball screw, ball-rolling spindle - Manufacturer: Blis, ball screw drive, ball-rolling spindle - Thread length: 1075 mm - Thread: Ø 25 mm / pitch 4 mm - Dimensions: see photos Gkedpfxjm U A E Ho Acujc - Overall dimensions: Ø 70 x 1235 mm - Weight: 4.7 kg

Gamybos metai: 2016, Sąlyga: beveik kaip naujas (naudotas), Screw Vacuum Pump Gsdpsfbmnajfx Acuokc Manufacturer: Busch Model: Cobra NC 0400 B Condition: As New Warranty: 6 months

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Erdungspfahl Gkodpewbu Nvofx Acujc Erdschraube Schraubfundament Solar-Erdschraube Helixpfahl

Sąlyga: dilaminuotas dirbtuvėje (naudotas), unidad completa de plastificación para DEMAG 2.300 con husillo y cilindro de 80 mm Gksdpofwcttsfx Acuec

Sąlyga: naudotas, Ball screw with nut, roller screw, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw drive from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos -Overall dimensions: 870/140/H130 mm Gkodekvrqiepfx Acujc -Weight: 18 kg

Gamybos metai: 2008, Sąlyga: labai geros būklės (naudotas), Screw pump Manufacturer: Busch Gjdpfx Acsd Rafbsuokc Model: Cobra DS 600 E Condition: Very good Delivery time: ex stock

Sąlyga: geras (naudotas), Lubrication pin for rope sheave, steel rope sheave, rope deflection sheave, crane rope, four-rope clamshell grab, polyp grab, mechanical multi-shell grab, clamshell grab, ship unloading grab, scrap grab, refuse grab, rope grab, digging grab, pin, crane pin, lubrication pin Gksdpfov Ikniex Acusc - Lubrication pin: crane pin type d=90x2+8 M48 - Shaft: Ø 69.5 mm - Ref. no.: 1031 4143 - Quantity: 5x crane pins available - Price: per piece - Dimension: Ø 90 x 248 mm - Weight: 6.9 kg/piece

Sąlyga: naudotas, Ball screw with nut, Transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded bar -Manufacturer: Rexroth -Type: R150257086 -Type: 69115 40H -Thread diameter: 48 mm Gkedocp Anpspfx Acuoc -Thread pitch (two-start): 20 mm -Overall length: 1995 mm -Weight: 26 kg

Sąlyga: geras (naudotas), Grease pin for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope clamshell grab, orange peel grab, mechanical multi-shell grab, clamshell grab, ship unloading grab, scrap grab, waste grab, rope grab, grab bucket, bolt crane pin, grease pin Gkodsv Ikrujpfx Acusc - Grease pin: Crane pin type M48 - Shaft: Ø 69.5 mm - Quantity: 8x crane pins available - Price: per piece - Dimensions: Ø 92 x 280 mm - Weight: 9.3 kg/pc.

Sąlyga: naudotas, Thread cutting head with chaser jaws, thread cutting die head, cutting head, thread chaser - Manufacturer: Bucki, thread chaser thread restorer - Type: 61060 Gksdpjm Dyh Hsfx Acuec - Outer diameter: 1 3/4" to 4" - Dimensions: 350/125/27 mm - Weight: 1.7 kg

Sąlyga: naudotas, Ball screw with nut, rolled screw, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyer, precision ball screw -Shaft: Ø 20 mm Gsdefngxdopfx Acuokc -Thread length: 525 mm -Dimensions: 680/100/H70 mm -Weight: 4.6 kg

Sąlyga: geras (naudotas), Grease pin for rope pulley, wire rope pulley, deflection pulley, crane rope, four-rope clamshell grab, polyp grab, mechanical clamshell grab, clamshell bucket, ship unloading grab, scrap grab, waste grab, rope grab, grab bucket, pin crane pin, grease pin -Grease Pin: Crane pin type 75x145 M48 Gjdpfxov Illcs Acuskc -Shaft diameter: Ø 59.6 mm -Quantity: 7 pins available -Price: per piece -Dimensions: Ø 80 x 170 mm -Weight: 3.9 kg/pc.

Sąlyga: geras (naudotas), Grease pin for rope pulley, steel rope pulley, deflection pulley, crane rope, four-rope clamshell grab, polyp grab, mechanical multi-shell grab, clamshell grab, ship unloading grab, scrap grab, waste grab, rope grab, digger grab, crane pin, grease pin - Grease pin: thread M30 - Shaft: Ø 39.6 x 80 mm Gksdpfx Acjv Ilqxsuoc - Quantity: 9 pins available - Price: per piece - Dimensions: Ø 60 x 125 mm - Weight: 1.3 kg/each

Sąlyga: naudotas, Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, hanger bolt M10 x 200, 50 pcs/box -Type: Type 2 SW 7 -Material: Stainless steel A2-70 -Quantity: 13 boxes available Gedpfx Acoipapbeuekc -Price: per box -Box dimensions: 220/220/H90 mm -Weight: 6.2 kg/box

Sąlyga: naudotas, Ball screw with nut, Transroll spindle, ball screw nut, leadscrew, threaded rod, threaded bolt, threaded bar Gkeded Iqqhepfx Acuoc - Manufacturer: WARNER ELECTRIC - Spindles are: unused - Type: - Thread diameter: 39 mm - Thread pitch: 5 mm - Thread length: 405 mm - Total length: 580 mm - Quantity: 17 spindles available - Price: per piece - Weight: 5.9 kg

Sąlyga: geras (naudotas), Grease pins for sheave wheels, wire rope sheaves, deflection pulleys, crane ropes, four-rope clamshell grabs, orange peel grabs, mechanical multi-shell grabs, shell grabs, ship unloading grabs, scrap grabs, waste grabs, rope grabs, grab buckets, pin, crane pin Grease Pin: Crane Pin Type M48 - Shaft: Ø 69.5 mm - Quantity: 3 crane pins available - Price: per piece - Dimensions: Ø 92 x 345 mm Godpfsv Ikt Ejx Acuskc - Weight: 13.2 kg/piece

Sąlyga: naudotas, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 rotary filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 filling valves) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1,800 bph (5 L) Gedpfsu I N Npsx Acuokc 2) ZALKIN 4 PET bottle capping machine - number of capping heads: 4 pcs - capacity: approx. 2,000 bph Used machines, in working condition at the time of dismantling. Complete original technical documentation included. In other offers: also available are semi-automatic blow molding machines for 5 L PET bottles, compressors, and bottle labelling machines.

Sąlyga: naujas, Adept Technology 10332-00655 EVI Board, serial number as shown in photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Godpfoi D Ttwex Acuskc

Sąlyga: geras (naudotas), Polar Mohr 92XT popieriaus pjaustymo giljotina Gjdpfx Asxgbcdscuskc Šis įrenginys yra labai geros būklės, paruoštas darbui, atliktas aptarnavimas. Tai pripažintas giljotinų prekinis ženklas, flagmaninis produktas. Pagaminta 2009 m. Techniniai duomenys: Pjovimo plotis: 920 mm Sluoksnio aukštis: 130 mm Valdiklis su 15″ spalvotu jutikliniu ekranu Oro stalas Šviesos užtvaros Chromuotos stalo dangos Rutulinis varžtas galinei šukinei pavarai Optinė pjovimo linija Padidinti šoniniai stalai Peilio keitimas per valdiklį Svoris: 2000 kg Maitinimas: 380 V Komplekte: dokumentacija, įrankių komplektas, spaudimo blokas, atsarginis peilis ir vienas peilis įrenginyje.