Trys Žandikaulio Chuck Gręžimo pirkti naudotą (7 440)

Sąlyga: labai geros būklės (naudotas), Katalogo numeris: 7689 Gsdow Eluqopfx Adpjtt TECHNINIAI DUOMENYS - Įrankio skersmuo: 16 mm - Maksimali skylės gylis: 160 mm - Maksimalus frezavimo ilgis: 160 mm - Gręžimo įrenginio reguliavimas: pirmyn/atgal, aukštyn/žemyn ir į šonus - Darbo stalo matmenys: 600x320 mm - Medžiagos spaudimas - Variklio galia: 2,2 kW - Matmenys (ilgis/plotis/aukštis): 950x740x1330 mm - Svoris: 283 kg PRIVALUMAI – Pagaminta Lenkijoje – Labai gera būklė – Naudotas gręžimo staklės Grynoji kaina: 6300 PLN Grynoji kaina: 1500 EUR, remiantis 4,2 EUR kursu (Kainos gali keistis esant didesniems svyravimams)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 000 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 2 000 mm, stalo apkrova: 6 000 kg, ašies skersmuo: 110 mm, veleno greitis (min.): 5 aps./min, veleno greitis (maks.): 1 120 aps./min, bendras aukštis: 4 300 mm, bendras ilgis: 7 200 mm, bendras plotis: 4 600 mm, stalo ilgis: 1 600 mm, stalo plotis: 1 400 mm, padavimo ilgis W ašis: 800 mm, įvesties srovės tipas: Oro kondicionierius, spindelio eiga: 800 mm, bendras svoris: 26 000 kg, paskutinio kapitalinio remonto metai: 2020, For sale is a Union Gera BFT 110/6 horizontal boring mill. The machine was manufactured around 1980 and was completely overhauled by us in 2009/2010. Since then, it has been under our professional service and care. Scope of the overhaul included, among others: - Electrical system almost completely renewed - New control cabinet including Siemens S7-200 PLC system - New Siemens Simodrive 611 drive technology, feed motors Siemens 1FK7 - Heidenhain TNC 124 position controller + electronic handwheel - Heidenhain linear measuring systems on X, Y, and Z axes - Heidenhain rotary encoder on B axis (rotary table) - Spindle drive: three-phase asynchronous motor with DC braking electronics - Replacement/overhaul of all hydraulic components - New ball screw drives (KGT) on X and Y axes - Overhaul of the drive systems of all feed axes - All axes have been newly scraped - Refurbishment of lubrication systems for axes and spindle head - New bearings and overhaul of gearbox components in the spindle head For further technical details, please refer to the photos or contact us directly. Gtedeu U Hvwspfx Adpjt Machine features: - Heidenhain TNC 124 position controller + electronic handwheel - Facing slide (U axis) - Electric tool clamping system SK 50 The machine is being sold due to capacity reasons. The system is fully operational and immediately available. It meets the machining accuracy as per the manufacturer's protocol. Technical documentation is available. The machine is fully functional and can be inspected under power by prior arrangement. This offer is non-binding and subject to our terms and conditions of sale and delivery. Errors and prior sale excepted. As warranty is excluded when purchasing used machinery, we recommend that customers inspect the machine prior to finalizing any purchase. Payment must be made in advance by bank transfer, as is customary for used machinery. Dismantling, relocation, installation, commissioning, and geometric alignment at the new site can be provided by us upon request. We are happy to submit a separate quotation for this. Delivery within the EU is possible on request.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Machine is on display and has only been used for demonstration purposes. Optimill F 150 E CNC milling machine directly from the manufacturer. F 150 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. - Carousel tool changer with 16 tool stations - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - SIEMENS servo drives in all axes (closed-loop control) - Belt-type chip conveyor for efficient chip removal - Chip bin - Max. spindle speed 10,000 rpm - Work area machine light - Portable electronic handwheel with enabling button and emergency stop switch for easy program setup - Coolant system with 190-liter coolant tank - Tool changes performed automatically or by push-button - Heavy-duty, precision-milled, large milling table - Exceptionally large access doors minimize cleaning and maintenance time - Software package "SINUMERIK 808D on PC" included (hands-on training software for offline programming and simulation of workpieces on PC; free download available) SINUMERIK 808 ADVANCED – CNC technology from the technology leader, combined with revolutionary user interface The SINUMERIK 808D ADVANCED control is a panel-based CNC controller. This compact and user-friendly entry-level solution is used for simple milling applications. Features such as easy operation, commissioning, and maintenance make it the perfect base for equipping CNC machines. With its technology-specific configuration, the SINUMERIK 808D ADVANCED is perfectly preconfigured for milling. Through hardware and software extensions, the 808D ADVANCED also provides sufficient performance for basic mold and toolmaking requirements. Compact and Robust Thanks to its panel-based CNC design with few interfaces and an operator panel compliant to IP65 protection class, the SINUMERIK 808D ADVANCED is ideally suited for use in harsh environments. Its compact dimensions allow installation in small-footprint machines. INCLUDED: - RJ45 Ethernet Port Gtjdew Ea Dgepfx Adpet - 8.4” color LCD with 800 x 600 resolution - Remote maintenance ready - AST function for easy optimization to meet higher requirements for dynamics and accuracy - Absolute encoder / no reference run required - Higher accuracy Travel: X = 750 mm Y = 500 mm Z = 500 mm Dimensions and Weights Length approx. 3420 mm Width/Depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling/Milling Performance Maximum facing mill diameter: 80 mm Maximum end mill diameter: 38 mm Electrical Data Supply Voltage: 400 V Mains Frequency: 50 Hz Electrical connection Total connected load: 15 kW Horizontal Milling Table Length: 900 mm Width: 500 mm Vertical spindle - table distance min.: 100 mm Vertical spindle - table distance max.: 600 mm T-slot size: 18 mm Number of T-slots: 5 T-slot spacing: 80 mm Maximum load capacity: 350 kg Accuracy Repeatability: ±0.005 mm Positioning accuracy: ±0.01 mm

Sąlyga: geras (naudotas), Gamybos metai: 1975, Funkcionalumas: visiškai funkcionalus, Used Table-Type Boring Mill / Horizontal Boring Machine TOS Varnsdorf W9 – including technical data Manufacturer: TOS Varnsdorf Model: W9 Machine type: Table-type boring mill / Horizontal boring machine Condition: Used Availability: Immediately Machine Description For sale is a used, robust table-type boring mill / horizontal boring machine TOS Varnsdorf W9 – ideal for drilling, boring, milling, and threading operations on medium-sized workpieces in machinery and plant construction. The machine was last in functional operation and is excellently suited for productive manufacturing or as a replacement machine. Technical Data Spindle & Drive Working spindle diameter: 90 mm Spindle extension (W-axis) diameter: approx. 710 mm Spindle taper: Morse 5 (MT-5) Spindle speed: 0 – approx. 1400 rpm (depending on gearbox/version) Main motor power: approx. 7.5 kW Travels Cross travel (X-axis): 1000 – 1250 mm Vertical travel (Y-axis): 900 – 1120 mm Longitudinal travel (Z-axis): 800 – 1400 mm Spindle stroke (W-axis): approx. 710 mm Table & Load Table size (clamping surface): approx. 1000 x 1120 mm Max. workpiece weight / table load: approx. 3000 kg Gtsdpfx Ajx U Dd Aedpjt Machine Dimensions & Weight Machine L × W × H: approx. 3900 × 2500 × 2650 mm Machine weight (net): approx. 9000 – 11500 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2001,

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Restauruotas, perdažytas stiklo gręžimo įrenginys. Išbandytas su Bentele gamintoju. Šiuo metu išardytas sandėly. Gtjdpfxjxz Ez Hs Adpot

Sąlyga: naudotas, Gamybos metai: 2004, Purpose: Construction Serial number: 04085xxxx Please contact ATS Norway for more information. Please quote reference number upon inquiry: 15082 Specifications: Model year: 2004 Operating hours: Approx. 10,000 hours (hour meter is not functioning) Chassis: see photos Track width: approx. 40 cm Equipped with winch Dynaset generator included Serviced: Both by owner and in a workshop Available immediately Dimensions: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tonnes Description: The hour meter is not working. However, the owner estimates the machine has approx. 10,000 operating hours. The engine was replaced 2 years ago, and has only run for 500 hours since replacement. Drills holes of 193 mm. Delivery includes an auger and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine, which after replacement has only 500 operating hours. It is ready for shipment and operational immediately. Please contact us for further information or to arrange a viewing! Operating hours: 10,000 Own weight: 12,600 kg Model: 55S Gtjdpfx Ajvg Nt Iedpjt

Sąlyga: geras (naudotas), WMW BR 40/2 x 1250 radialinė gręžimo staklė Gręžimo galia pliene (skersmuo): 60 mm Konsole išsikišimas: 1250 mm Didžiausias ruošinio aukštis: 820 mm Apsisukimų per minutę: 20–1200 aps./min. Veleno tvirtinimas: MK 5 Veleno eiga: 400 mm Padavimas: 0,063–0,63 m/min Konsolės vertikali eiga: 950 mm Elektra: 380 / 50 V / Hz Pagrindo plokštės spaudimo plotas: 1400x800 mm Bendra galingumo paklausa: 5 kW Staklių svoris apie: 3 t Užimamas plotas apie: 2,2 x 1,0 x 2,8 m Gsdex U Ectopfx Adpott

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is on display. Optimill F 110 HSC Premium CNC Milling Machine directly from the manufacturer. F 110 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and high durability. · Heavy-duty construction · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Linear guideway with ball screw drive for high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Massive, precision-ground milling table with three T-slots, large dimensions · Portable electronic handwheel with enabling switch and emergency-off impact switch greatly simplifies program setup · Coolant system with chip flushing and cleaning gun · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 connection and 230 V power supply · Enclosed control cabinet with integrated heat exchanger for optimal temperature and prevention of ingress of dirt particles · Machine light in working area · SIEMENS extended warranty for materials and free online/on-site service (OSS Plus) · 1 year of basic maintenance contract included in Germany/Austria/Switzerland Milling Spindle: Inline spindle Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 duty: 9 kW Torque drive motor S1 duty: 57 Nm Drive motor S6-30% duty: 21.2 kW Torque drive motor S6-30% duty: 135 Nm Spindle mount: SK 40 / DIN 69871 Option: Internal spindle cooling Drive motor S1 duty: 10.5 kW Torque drive motor S1 duty: 50 Nm Drive motor S6-30% duty: 26.4 kW Torque drive motor S6-30% duty: 125 Nm Coolant System Coolant pump power (2 units): 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Cleaning Pump Cleaning pump power: 530 W Milling Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (with adjacent stations free): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool: 2.5 seconds Travel X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z: 48 / 48 / 32 m/min Motor torque X, Y, Z: 11 Nm / 11 Nm / 20 Nm Feed Forces X, Y, Z: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Speeds*: 12,000 rpm Pneumatics Air pressure: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 600 mm Table length x width: 850 x 400 mm Gtsdpjw Ea Rgsfx Adpot T-slot size/number/spacing: 18 mm / 3 / 100 mm Max. load: 400 kg Dimensions L x W x H: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg

Sąlyga: geras (naudotas), Description: Robust industrial pillar drilling machine from Soviet production. The STANKO 2H118-1 is designed for workshop use and is suitable for drilling, reaming, countersinking, as well as for basic thread cutting tasks. Very solid construction, mechanical gearbox, durable design. Technical data (typical configuration) - Drilling capacity in steel: approx. 23 mm - Spindle taper: Morse taper MT2 - Spindle speeds: 9 steps - Speed range: approx. 90 – 1,400 rpm - Feed: manual - Feed stages: mechanically adjustable - Motor power: approx. 1.5 – 2.2 kW Godpfjx U Agcex Adpjtt - Connection: 380–400 V / 50 Hz - Forward/reverse rotation: yes - Spindle brake: mechanical - Depth stop: included - Machine weight: approx. 400 – 500 kg (estimated) - Space requirements: approx. 700 × 800 × 2,100 mm Equipment: - mechanical gearbox - heavy-duty machine table - depth stop with scale - tool ejector - main switch Condition: Machine is used and appropriate for its age. Function tested. Visual signs of use present, technically sound.

Gamybos metai: 2011, Sąlyga: paruoštas naudoti (naudotas), bendras svoris: 7 300 kg, bendras aukštis: 3 245 mm, ašies variklio galia: 5 500 W, gaminio ilgis (maks.): 3 080 mm, Bendrieji duomenys Staklių svoris: 7300 kg Aukštis: 3245 mm Matmenys Staklių ilgis: 3080 mm Pagrindinis pavara Godpfx Adjx D Ilaspstt Veleno variklio galia: 5,5 kW Šios WAGNER PRC 60 pagamintos 2011 m. Jos gręžimo galimybė pliene – 60 mm, stalo matmenys – 630 × 800 mm, veleno kūgis – MK 5. Staklės turi 400 mm veleno eigą ir 400–2000 mm pasiekiamumą. Kolonos skersmuo – 450 mm, vertikalios sijos reguliavimas – 800 mm. Tai tvirtos ir universalios staklės. Dėl daugiau informacijos kreipkitės į mus. Panaudojimo tipai Kitos metalo apdirbimo staklės

Sąlyga: geras (naudotas), HANG 114-00/4 papierbohrmaschine Das Gerät befindet sich in einem sehr guten Zustand. Es handelt sich um das neueste Modell der Marke HANG. Die höchste Maschinenklasse unter den Bohrmaschinen. Abfall wird in einen externen Behälter geleitet. Gesteuert über einen elektrischen Fußschalter. Godpfx Aot N R Nrodpott Jeder Bohrkopf ist unabhängig verstellbar, sodass Bohrer unterschiedlicher Länge verwendet werden können. Technische Daten: Anzahl der Bohrköpfe: 4 Bohrerdurchmesser: 3–10 mm Stapelhöhe: 65 mm Bohrabstand max.: 260 mm Drehzahl: 1.500 U/min Zwei Hubgeschwindigkeiten des Tisches Tischmaße: 600 × 480 mm Stromversorgung: 400 V Gewicht: 400 kg Die Maschine wird mit Dokumentation, Bedienwerkzeug und Bohrern geliefert.

Sąlyga: naudotas, Gamybos metai: 2018, Serijos numeris: 4xxxx Dėl daugiau informacijos kreipkitės į ATS Norway. Užklausos metu nurodykite nuorodos numerį: 20805 Specifikacijos: - 2018 metų modelis - Variklio darbo valandos: apie 3500 - Kūjo darbo valandos: apie 19000 - Svoris: 11 100 kg Gedpfswvzrmex Adpett - Važiuoklė (žiūrėkite nuotraukas) - Juostos plotis: 25 cm - Bendras plotis: 220 cm - Strypų perjungimo svirtis - Naujas gylio matuoklis - Dulkių siurblys - Gervė - Techninės priežiūros istorija - Prieš pardavimą bus pakeistos 2 bėgių kreipiančiosios - Pristatoma iš karto Aprašymas: Gerai prižiūrėtas gręžimo įrenginys Sandvik DINO 400. Įrenginys – 2018 metų, su apie 3500 variklio darbo valandų. Įrengtas strypų keitiklis bei naujas gylio matuoklis. Pristatomas iš karto. Savasis svoris: 11100 Modelis: Dino DC400RI

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, The machine is on display and has only been used for demonstration purposes. Final sale of the last Optimill F 120X CNC milling machine directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design High productivity Linear guideways for high rapid traverse speeds in all axes 21-position tool changer magazine High reliability Cast base made of quality Meehanite cast iron Precision ground cross table with 3 T-slots Strongly ribbed, torsion-resistant machine base Precision-ground, preloaded, high-performance ball screws in all axes High-torque servo drives directly on the ball screws in all three axes Electronic handwheel Chip conveyor Cleaning pistol RJ45 connector, USB port, and power connection (230V) Coolant system with 210-liter coolant tank Heat exchanger Included options: PPU 290 touch panel 16,000 rpm inline spindle with oil cooler Belt conveyor with chip cart Machine leasing possible through Siemens Finance. Sufficient liquidity required. Dimensions and Weights Length approx. 2,315 mm Width/Depth approx. 2,194 mm Height approx. 2,325 mm Weight approx. 3,800 kg Drilling/Milling Capacity Maximum cutter head diameter: 80 mm Feed/Rapid Traverse Speed X-axis: 40,000 mm/min Y-axis: 40,000 mm/min Z-axis: 40,000 mm/min Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Line frequency: 50 Hz Electrical connection Total connected load: 45 kVA Distance Vertical Spindle – Milling Table min.: 150 mm Distance Vertical Spindle – Milling Table max.: 450 mm T-slot size: 14 mm Number of T-slots: 3 Godpfxsw Ea Rmj Adpott T-slot spacing: 125 mm Maximum load capacity: 250 kg Precision Repeatability: ± 0.006 mm Positioning accuracy: ± 0.005 mm Coolant System Coolant pump(s) Drive power per coolant pump: 370 W Tank capacity: 120 l Control Type: Sinumerik 828D PPU 290 System software: SW 28x CNC memory: 8 MB Block change time: 2 ms Look Ahead: 150 Number of tools: 512 Travel X-axis (automatic): 500 mm Y-axis (automatic): 400 mm Z-axis (automatic): 300 mm Vertical Spindle Spindle taper: BT 30 Speed range: 10 – 16,000 rpm Drive motor power S1 continuous: 12 kW Drive motor power S6-30% duty: 22.8 kW Drive motor torque S1 continuous: 38 Nm Drive motor torque S6 30% duty: 116 Nm Feed Motor Torque X-axis S1 continuous: 6 Nm Y-axis S1 continuous: 6 Nm Z-axis S1 continuous: 11 Nm Servo Tool Changer Design: Carousel in front of spindle Number of tool stations: 21 tools

Sąlyga: geras (naudotas), Hang 117-01 paprill Das Gerät befindet sich in einwandfreiem Zustand, 100% funktionsfähig. Maschine der Spitzenklasse unter den Bohrmaschinen. Jeder Bohrkopf ist einzeln einstellbar, sodass Bohrer unterschiedlicher Länge verwendet werden können. Der Bohrtisch ist in jeder Ebene verstellbar und mit einer Arretierung versehen. Der Abstand der Bohrköpfe ist mittels Kurbel verstellbar. Gtodpfxevac Hhe Adpst Späne werden in einen externen Behälter geleitet. Zwei Arbeitsgeschwindigkeiten: 950 und 1900 U/min Technische Daten: Anzahl der Bohrköpfe: 2 Bohrdurchmesser: 3–10 mm Stapelhöhe: 60 mm Bohrkopf-Abstand min: 45 mm / max: 160 mm Tischabmessungen: 780 x 430 mm Gewicht: 100 kg Stromversorgung: 380 V Die Maschine verfügt über Dokumentation, Wartungswerkzeug, Bohrer und eine neue Säule.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The machine is currently on display. Optimill F 300 HSC Premium CNC milling machine, directly from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control features powerful performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • Exceptional reliability • Rigid machine base reinforced with ribbing, distortion-free • Profile rails with recirculating roller guides on all axes for high load capacity • High-torque servo drives, directly coupled to ball screw drives in all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guides on all three axes • Main spindle SK40 with speeds up to 15,000 rpm featuring inline spindle • Solid, precision milling table, oversized with five T-slots, precision-ground • Portable electronic handwheel with enable button and emergency-stop switch greatly simplifies program setup • Automatic tool changer with double-arm gripper for 30 tool pockets • Coolant system with chip flushing and cleaning gun • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor provides efficient chip removal • Chip trolley • Oil separator • LED work light in the machining area • Siemens additional package: material defect liability and free online/on-site service OSS Plus • 1-year Basic maintenance contract included within Germany/Austria/Switzerland • Control System • 15.6” color display • 16:9 format • Complete Package • Safety Integrated • Residual material detection and processing • ShopMill work-step programming • Network drive management • 3D simulation • Graphic programming • Siemens OSS PLUS extra package • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 • Equipment Details • Inline spindle • SK 40 / DIN 69871 interface • Spindle speed: 15,000 rpm • Dimensions and Weight • Length: approx. 2856 mm • Width/Depth: approx. 2300 mm • Height: approx. 2850 mm • Weight: approx. 6500 kg • Rapid traverse speeds • X-axis: 36 m/min • Y-axis: 36 m/min • Z-axis: 32 m/min • Electrical Data • Connection voltage: 400 V • Mains frequency: 50 Hz • Electrical connection • Total connected load: 30 kVA • Horizontal milling table • Length: 1200 mm • Width: 600 mm • T-slot size: 18 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Max. load capacity: 800 kg • Accuracy • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm • Travel Range • X-axis automatic: 1000 mm • Y-axis automatic: 620 mm • Z-axis automatic: 630 mm • Vertical Spindle • Spindle interface: SK 40 DIN 69871 • Speed range: 15,000 rpm • Continuous drive motor power S1: 20 kW • Drive motor power S6-30% duty cycle: 52.4 kW • Continuous torque S1: 96 Nm • Torque at 30% duty S6: 250 Nm • Feed Force • Feed force X-axis: 6.68 kN • Feed force Y-axis: 6.68 kN • Feed force Z-axis: 12.01 kN • Feed Motor Torque • X-axis S1 continuous: 20 Nm • Y-axis S1 continuous: 20 Nm • Z-axis S1 continuous: 36 Nm • Tool Changer • Double-arm gripper • Number of tool pockets: 30 • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Tool change time tool-to-tool: 2.5 s Gtedew Ea Ifjpfx Adpet

Sąlyga: geras (naudotas), Durselen PB 16A keturgalvis popieriaus gręžtuvas Įrenginys nepriekaištingos būklės, kaip naujas! Tai naujausias, šiuo metu gaminamas modelis. Pagaminta Vokietijoje. Keturios gręžimo galvos su reguliuojamu atstumu tarp jų. Įrengta pneumatinė grąžtų aušinimo sistema. Stumdomas darbinis stalas. Automatinė kolonėlių sistema – diržas persukamas į kitą padėtį susidėvėjus. Gjdpfx Adju A Rr Ijpstt Techniniai duomenys: Gręžimo skersmuo: 2–16 mm, Pakuotės aukštis: 50 mm, Svoris: 300 kg, Maitinimas: 380 V. Automatinis gręžimo ciklas, valdomas kojiniu pedalu. Spindulių greičio ir galvų nuleidimo greičio nuoseklus reguliavimas naudojant dažnio keitiklius. Tvirta, ant postamento sumontuota konstrukcija. Atliekos nukreipiamos į integruotą talpyklą. Gręžimo stalas reguliuojamas visose plokštumose, priekinės ir šoninės paraštės. Komplekte yra eksploatavimo įrankiai ir grąžtai.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine is on display and has only been used for demonstration purposes. Optimill F 80 CNC milling machine, directly from the manufacturer. • Machine with column construction made of cast iron for high rigidity • Carousel tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication system • Siemens main spindle motor • Siemens servo drive on all axes (closed control loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop switch significantly facilitates program set-up SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC • Controller-identical software package, further simplifying the operation of the machine tool Compact and robust • Due to the panel-based CNC design with few interfaces and an operator panel with IP65 protection rating, the SINUMERIK 808D ADVANCED is ideally suited for operation in harsh environments Communicative • Front panel USB (IP65) • Serial interface RS232C • Rear RJ45 Ethernet port • Technology-specific keyboard layout • Hard keys with protective membrane Dimensions and Weights Length approx. 1995 mm Width/Depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid Traverse Speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical Data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal Milling Table Length 800 mm Width 260 mm Vertical spindle – table distance min. 100 mm Vertical spindle – table distance max. 550 mm T-slot size 16 mm Number of T-slots 5 T-slot spacing 50 mm Max. load capacity 200 kg Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant System Coolant pump drive power 450 W Tank capacity 80 l Pneumatic Connection Operating pressure 7 bar Travel X-axis automatic 450 mm Y-axis automatic 260 mm Z-axis automatic 450 mm Spindle – column distance max. 370 mm Gsdpfxsw Ea Rts Adpstt Vertical Spindle Spindle taper BT 40 Speed range 50 – 10,000 rpm Continuous duty motor power S1 3.7 kW Motor power S6-30% duty 5.5 kW Continuous torque S1 24 Nm Torque for 30% duty cycle S6 36 Nm Feed Motor Torque X-axis continuous duty S1 6 Nm Y-axis continuous duty S1 6 Nm Z-axis continuous duty S1 11 Nm Tool Changer Type Carousel Number of tool stations 12 tools Max. tool diameter 95 mm Max. tool length 300 mm Max. tool weight 8 kg Tool change time Span to span (C to C)07 s

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is on display. Optimill F 110 E CNC milling machine direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control is distinguished by its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Rigid, torsion-free machine base with strong ribbing · Profile guideways with ball circulation for high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Spindle oil cooler · Massive, precise milling table with three T-slots, large dimensions, and precision-ground · Portable electronic handwheel with enable switch and emergency stop button vastly simplifies program setup · Coolant system with chip wash and cleaning pistol · Chip conveyor, screw design · Chip trolley · RJ45 socket and 230 V power supply · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of contaminants · Machine light, providing over 500 lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Remote maintenance ready AST function: enables easy optimization for high dynamic and accuracy requirements Absolute encoder / no homing required Higher precision Travel: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Gjdpow Ebv Rjfx Adpott Length approx. 2100 mm Width/depth approx. 2300 mm Height approx. 2750 mm Weight approx. 4100 kg Drilling/milling capabilities Maximum cutter head size: 90 mm Electrical data Connection voltage: 400 V Power frequency: 50 Hz Total connected load: 20 kW Horizontal milling table Length: 850 mm Width: 400 mm Vertical spindle to milling table (min): 100 mm Vertical spindle to milling table (max): 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load: 400 kg Accuracy Repeatability: ±0.005 mm Positioning accuracy: ±0.005 mm

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine currently on display. Optimill F110 ECO Premium CNC milling machine directly from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 operation: 7.5 kW Torque drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant system Coolant pump power: 900 W Max. delivery rate: 35 l/min. Tank capacity: 116 liters Cleaning pump Milling precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent tool stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool-to-tool): 2.5 seconds Travel distances X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed drives Rapid traverse X, Y, Z: 48 / 48 / 32 m/min Motor torque X / Y / Z: 11 Nm / 11 Nm / 20 Nm Feed forces X / Y / Z: 3.67 kN / 3.67 kN / 6.68 kN Spindle speed range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling table Distance spindle to table: 100 – 600 mm Table length × width: 800 × 400 mm T-slot size / number / spacing: 18 mm / 3 / 100 mm Maximum payload: 400 kg Dimensions Length × width × height: 2,100 × 2,300 × 2,750 mm Total weight: 4,300 kg Equipment Linear guides with recirculating ball screws for high rapid traverse speeds on all axes Telescopic way covers on all three axes Automatic lubrication Portable electronic handwheel with enabling button and emergency stop button RJ45 port and 230 V power outlet Machine lamp in working area Cleaning gun Gjdpfx Ajw Edbpjdpott Ball screws and linear guides from THK Chip flush Spindle head cooling (machining area) Electrical cabinet Arm-type tool changer SW24 CE *Additional options available

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Optimum OPTIdrill RD 6 High-precision, robust radial drilling machines in top quality. Ideal for flexible use in both single-part and series production. • Versatile applications such as drilling, reaming, and thread cutting • Electrically braked motor • 24V DC electrics and dual-channel safety circuit according to DIN EN 12717 • Heavy-duty, high-quality cast construction • Large reach thanks to horizontally adjustable machine head • Ergonomically arranged control panel • Smooth-operating swivel and travel axes • Sophisticated column swiveling with optimized clamping for maximum stability with minimal clamping offset • Rigid, torque-resistant arm design • Height adjustment of the arm via powerful motorized drive and lead screw • Drill head gearbox runs in oil bath • Arm guideways are hardened and precision-ground • Gearbox gears made from case-hardened and precision-ground chrome-nickel steel for quiet and smooth operation • Drill head and column can be clamped or released together or separately • Forward and reverse operation • Large, heavy-duty and precise drill table • Hardened and ground clamping table with parallel T-slots • Machine lamp • Overload protection • Thick-walled cast column ensures high smoothness and stability • LED lamp • Coolant system with integrated coolant tank in machine base Gjdpjwa Tc Sjfx Adpett RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter: 320 mm Length (approx.): 2670 mm Width/Depth (approx.): 1120 mm Height (approx.): 2760 mm Weight (approx.): 3200 kg Arm Swivel angle: 180° Drilling Capacity Max drilling capacity in steel (S235JR): 50 mm Continuous drilling capacity in steel (S235JR): 45 mm Drill Table T-slot size: 14 mm Number of T-slots: 4 T-slot spacing: 180 mm Max. distance spindle to drill table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Clamping table T-slot number: 3 Clamping table T-slot spacing: 150 mm Min. distance spindle to clamping table: 0 mm Max. distance spindle to clamping table: 910 mm Min. distance spindle to drill table: 465 mm Speed Range Speed range: 44 – 1023 rpm Number of speed steps: 12 Electrical Data Total connected load: 6.5 kW Mains voltage: 400 V Mains frequency: 50 Hz Machine Base Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor output: 4 kW Arm lift motor output: 1.5 kW Coolant pump drive motor output: 90 W Hydraulic clamping drive output: 0.75 kW Spindle Quill stroke: 270 mm Spindle taper: MT5 Quill feed rate: 0.06 – 0.2 mm/rev Quill feed speed stages: 3 Travels Drill head travel (horizontal): 1250 mm Arm lift travel (vertical): 680 mm Max. distance spindle to column: 1600 mm Min. distance spindle to column: 350 mm

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is on display. Optimill F 200 HSC Premium CNC milling machine directly from the manufacturer. F 200 HSC - The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and high durability. Heavy-duty design · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile rail with roller guideways for high rapid traverse speeds in all axes · High-torque servo drives in all three axes · Telescopic way covers on all three axes · Automatic lubrication · Massive, precision-ground milling table with five large T-slots · Portable electronic handwheel with enabling button and emergency stop shock switch greatly simplifies program setup · Coolant system with chip flushing and cleaning gun · Through-spindle coolant with 20 bar · Belt-type chip conveyor for efficient chip removal · Chip cart · RJ45 port and 230 V power connection · Sealed control cabinet with integrated heat exchanger for optimal temperature and to prevent dirt ingress · Machine light in the work area · Additional SIEMENS warranty package with free online/on-site OSS Plus service · 1 year Basic maintenance contract included for DE/AT/CH Milling spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor (S1 continuous duty): 10.5 kW Torque drive motor (S1): 50 Nm Drive motor (S6-30% duty cycle): 26.4 kW Torque drive motor (S6-30%): 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant system Coolant pump power, 3 units: 1 kW Delivery rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump power: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool-to-tool): 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse X / Y / Z: 48 m/min Motor torque X / Y / Z: 16 Nm / 16 Nm / 20 Nm Feed force X / Y / Z: 5.34 kN / 5.34 kN / 6.68 kN Speed range Spindle speeds: 12,000 rpm Pneumatics Air pressure: 6 - 8 bar Air consumption per hour: 6 - 8 kg/m³ Milling table Spindle-table distance: 100 - 650 mm Godew Ea Avopfx Adpott Table size (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, directly from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. • Machine features a rigid, cast iron column design for high structural stiffness • Carousel-type tool changer with eight tool positions • All linear guides equipped with stainless steel covers • Automatic centralized lubrication system • Siemens main spindle motor • Siemens servo drives in all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with a 70-liter coolant tank • Automatic tool change or at the press of a button (electropneumatic tool clamping system) • Heavy-duty, precision milled table – generously sized and finely ground • Large access doors for minimized cleaning and maintenance times • LED machine lamp for complete workspace illumination • SIEMENS extra package: material defect warranty and free on-site service OSS SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switches for feed and spindle override Absolute encoder / no referencing required • Enhanced accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS extra package • 12 months; Article No. 3589010 • 36 months; Article No. 3589012 Dimensions and weights Length approx. 2030 mm Width/Depth approx. 1600 mm Height approx. 1980 mm Gtedpfxjw Ea Swj Adpjt Weight approx. 1900 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Horizontal milling table Length 690 mm Width 225 mm Distance vertical spindle – table min. 90 mm Distance vertical spindle – table max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel range X-axis (automatic) 330 mm Y-axis (automatic) 220 mm Z-axis (automatic) 320 mm Distance spindle – column min. 280 mm Distance spindle – column max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Continuous-duty drive motor power S1 3.7 kW Drive motor power S6-30% duty cycle 5.5 kW Drive motor torque S1 24 Nm Drive motor torque S6-30% 36 Nm Feed speed X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis S1 3.5 Nm Y-axis S1 6 Nm Z-axis S1 6 Nm Tool changer Design carousel Number of tool positions 8 Max. tool diameter 100 mm Max. tool length 200 mm Max. tool weight 6 kg Tool-to-tool change time 7 s

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine is on display. Optimill F200 ECO Premium CNC milling machine directly from the manufacturer. F200 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is distinguished by its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 9 kW Torque drive motor S1 operation: 57 Nm Drive motor S6 30% operation: 17.1 kW Torque drive motor S6 30% operation: 118 Nm Spindle taper: BT40 Coolant system Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Gtjdpfxoxyh Dbo Adpot Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent tool stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid traverse X-, Y-, Z-axis: 48 / 48 / 48 m/min Motor torque X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed Forces X-/Y-/Z-axis: 5.34 kN / 5.34 kN / 6.68 kN Speed Range Speeds*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Distance spindle to table: 100 – 650 mm Table length x width: 1000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. payload: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg Equipment - Linear guideways with ball screws for high rapid traverse speeds on all axes - Telescopic guideway covers on all three axes - Automatic lubrication - Portable electronic handwheel with enable and emergency stop buttons - RJ45 connection and 230 V power outlet - Machine light in work area - Cleaning gun - Ball screws and linear guides by THK - Chip flushing system - Headstock cooling (machining area) - Electrical cabinet - Arm type tool changer - SW24 - CE *More options available

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training model) direct from the manufacturer. F 3 PRO – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. All linear guides with stainless steel covers Automatic central lubrication SIEMENS servo drive on all axes (open loop) Max. spindle speed 4000 rpm Work area equipped with machine light Portable electronic handwheel with enabling button and emergency stop switch. Greatly simplifies program setup Tool change at the press of a button Generously dimensioned access doors to minimize cleaning and maintenance time Software package "SINUMERIK 808D on PC" included (practical training software for offline programming and simulation of workpieces on a PC. Software can be downloaded free of charge.) SINUMERIK 808 ADVANCED – CNC technology from the industry leader, combined with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC controller. This compact and user-friendly entry-level solution is suitable for straightforward milling applications. Features such as easy handling, commissioning, and maintenance offer the perfect basis for equipping CNC machines. Compact and robust Thanks to its panel-based CNC design with minimal interfaces and an operator panel rated at IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. Its small dimensions allow integration into compact machines. INCLUDED RJ45 Ethernet port 8.4” color LCD display with 800 x 600 resolution Prepared for remote maintenance Dimensions and Weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Gjdpjw Ea R Hofx Adpott Drilling and Milling Performance Max. cutter head diameter 50 mm Max. shank cutter diameter 25 mm Electrical Data Connection voltage 400 V Line frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal Milling Table Length 620 mm Width 180 mm Distance vertical spindle – milling table min. 50 mm Distance vertical spindle – milling table max. 295 mm T-slot size 12 mm Number of T-slots 3 T-slot spacing 50 mm Max. table load 30 kg Accuracy Repeatability ±0.02 mm Positioning accuracy ±0.01 mm Coolant System Coolant pump drive power 95 W Tank capacity 30 l Travel X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical Spindle Spindle taper BT 30 Speed range 4000 rpm Note on speed range: Please note that the maximum spindle speed must be reduced by approximately 20% during continuous operation Drive motor power S1 (continuous operation) 1.5 kW Drive motor power S6-30% duty cycle 2.2 kW Drive motor torque S1 (continuous operation) 9.5 Nm Drive motor torque S6 (30% duty cycle) 14 Nm Feed Rate X-axis 10,000 mm/min Y-axis 10,000 mm/min Z-axis 10,000 mm/min Feed Motor Torque X-axis S1 (continuous) 1.9 Nm Y-axis S1 (continuous) 3.5 Nm Z-axis S1 (continuous) 3.5 Nm