Traub Tnl 12 pirkti naudotą (94)

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 86 157 h, The machine was manufactured in 1999 and underwent an 8,000-hour maintenance service last year. Total production hours: 86,157 h. Turret 1 has 14 stations (with Y-axis) Psdpjwur N Tjfx Adxsgu Turret 2 has 10 stations (without Y-axis)

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 Podpfx Aeuhadzjdxjgu - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2x HAINBUCH

Sąlyga: geras (naudotas), Gamybos metai: 1996, CNC turning center TRAUB Type: TNC65 DG Year: 1996 Control: TRAUB TX8F Pedpfeu Eug Iex Adxsgu Comes with extensive accessories.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x powered tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, part gripper, bar loader Iemca Master 880MP-E. Condition Podpjwi I Eysfx Adxegu Very well maintained, good condition, serviced. Machine geometry has been checked and adjusted/set up. The machine can be inspected under power – video also available. Warranty 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the spare parts, not for downtime or labor hours, travel time. The warranty expressly does not cover any parts other than those mentioned above, e.g. wear parts, electrics, electronics, hydraulics, etc.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Multi-spindle & bar automatic lathe Psdpfxowc Aqws Adxjgu TRAUB TD 26 Year: 1991 * Power at spindle: 2.2 kW * Number of spindles: 4 * Spindle bore: 26 mm * Speeds: 1.18 – 4,750 rpm * Total power: 3.2 kW * Length (L – R): 1,800 mm * Width (F – R): 1,000 mm * Height: 1,400 mm * Weight: 800 kg * Toolholder positions: 6 tools Additional information * Max round stock: 26 mm * Max square stock: 18 mm * Max hexagonal stock: 22 mm * Bar feeder included

Sąlyga: naudotas, Gamybos metai: 2006, veikimo valandos: 37 000 h, Funkcionalumas: visiškai funkcionalus, TRAUB TNX65 with Bar Loader and Accessories Year of manufacture: 2006 Operating hours: 37,000h Control system: TX8i - Both tool turrets newly resealed - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer's tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see pictures) - Breuer bar loader (1200mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 [kW] - Spindle speed: 5,000 [rpm] - Max. bar diameter: 65 [mm] - Max. main spindle chuck diameter: 175 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel range: 700 [mm] LEFT UPPER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] RIGHT LOWER TURRET HEAD Pedpfjwm Igfox Adxegu - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 95 [kW] WEIGHT AND DIMENSIONS - Required space: 5,450 x 2,318 [mm] - Machine height: 2,258 [mm] - Machine weight: 10,000 [kg]

Sąlyga: geras (naudotas), Gamybos metai: 1989, 1 x automatic lathe Traub TD 16 Year of manufacture: 1989 Pedpfx Aovga A Tjdxegu with hydraulic single bar feeder LNS Hydrobar 3.16 -HS 4.4 Year of manufacture: 1989 Equipment: 6-position star turret Quick-release collet system Long turning device Vogel central lubrication system Accessories: see photos The machine can be inspected under power.

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1994, veikimo valandos: 8 000 h, Funkcionalumas: nepatikrintas, Machine in good condition. Pedpev Im Sdefx Adxogu

Gamybos metai: 2005, Sąlyga: geras (naudotas), 7 Driven Tool Holders suitable for CNC lathe Manufacturer: TRAUB TNA 480, Tool Mount Size: VDI 40. Also fits SAUTER tool turrets with VDI 40 interface. 7 Horizontal units No. 3/4/5/6/7/8/9 for drilling and milling, price per unit: €550 2 Horizontal units No. 1 and No. 2 for thread tapping, price per unit: €600 1 NC drill chuck VDI 40, clamping range 1-13 mm, price: €100 1 NC drill chuck VDI 40, clamping range 2.5-16 mm, price: €150 Pgedjhwnfkepfx Adxou

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-station turrets with live tooling drive VDI30 • C-axis on main and counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank Pgodpfx Aowi Izhodxju • Spare parts list, wiring diagram, ATC sensor system Very good condition. Machine can be inspected under power. Machine geometry has been checked and adjusted/set.

Sąlyga: labai geros būklės (naudotas), Multi-spindle & bar automatic lathes TRAUB TK 42 * Spindle drive power: 5.5 – 9 kW * Maximum workpiece length: 206 mm * Spindle bore: 42 mm * Length (L–R): 2500 mm * Width (F–B): 900 mm * Height: 1700 mm * Tool turret: 4 slides Pgsdpfx Adewc Aqdoxju

Sąlyga: naudotas, Gamybos metai: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm (2-step) Feed rate: 10,000 mm/min Tool turret - number of stations: 8 Operating hours (power-on hours): 8,834 h Tailstock quill taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Pgodpou Rqabsfx Adxsu Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions (LxWxH) approx.: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment: 200 mm hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setting

Sąlyga: naudotas, Gamybos metai: 1990, Techniniai duomenys: Sukimosi skersmuo: 445 mm Sukimosi ilgis: 2000 mm Bendras energijos poreikis: 34 kW Apytikslis staklių svoris: 7,5 t Apytiksliai matmenys: 6 x 2,5 x 2,2 m Sukimosi skersmuo virš lovos vežimo: 660 mm Veleno skylė: 65 mm Pgjdpfx Adow I R Ndjxju Veleno sūkių diapazonas: 16–3150 aps./min. Greitasis pastūmos greitis X kryptimi: 10 mm/min Greitasis pastūmos greitis Z ašyje: 15 m/min Su CNC valdymu TX 8 D C ašis, pavaromi įrankiai Revolverinė galvutė su 14 pozicijų Uodega, SMW SLK 520 N centras kaip NC ašis Drožlių transporterio ir aušinimo įranga

Gamybos metai: 1978, Sąlyga: naudotas, Article: Program-controlled automatic lathe Brand: Traub Model: TF60 / 140 Year of manufacture: 1978 Bar automatic lathe Please contact us for further information and images via email(at) or Psdel Rmqtspfx Adxjgu

Sąlyga: geras (naudotas), Gamybos metai: 2007, Traub TNX 65/42 Centro di tornitura e fresatura Anno di costruzione: 2007 N. di serie: 7060107 Entrata in servizio: 2010 Controllo TX 8i-S (controllo basato su Mitsubishi/Traub con motori e azionamenti Mitsubishi) 15 assi CNC 4 torrette X-Y-Z ciascuna con 10 posizioni. Fino a 20 utensili per torretta Mandrino principale e contromandrino con foro passante da 65 mm (contromandrino con lavaggio refrigerante) Comando a pedale per serraggio/sgancio dei mandrini Ricevitore portale azionato da servomotore Sistema di rotazione idraulica con pinza pneumatica per pezzo finito e residuo barra Nastro trasportatore per pezzi finiti Filtro refrigerante a nastro cartaceo RESY Vasca del refrigerante Knoll con controllo della temperatura mediante gruppo frigorifero BKW Pompe del refrigerante ad alta pressione 20 bar e a bassa pressione 8 bar Evacuatore trucioli Knoll Caricatore di barre FMB Turbo 5-55 (nuovo del 2010) Podpfx Ajq Npqmodxsgu 2 portautensili tornitura singoli 2 portautensili tornitura doppi 1 portautensile di troncatura 1 portautensile motorizzato doppio radiale ER portapinza 1 portautensile motorizzato radiale ER portapinza 4 portautensili motorizzati radiali ER portapinza 1 portautensile motorizzato radiale porta frese cilindriche 1 portautensile motorizzato radiale ER portapinza orientabile 2 portautensili motorizzati radiali porta frese a disco 2 portautensili motorizzati assiali porta frese cilindriche 6 portautensili motorizzati assiali ER portapinza 43 ulteriori portautensili su elenco separato (vedi allegato supplementare) Mandrino principale Hainbuch con autocentrante portapinza Contromandrino Rohm autocentrante a 2 griffe 2 set di viti a ricircolo di sfere asse Z e pacchi cuscinetti di ricambio

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 51 400 h, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of Manufacture: 2011 Control: TX 8i-s Main / Sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Brief loader: Breuning Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Podpfowxc Hkex Adxogu Under power, available for inspection Delivery time approx. 2 weeks, by arrangement

Sąlyga: geras (naudotas), Gamybos metai: 2013, BAR FEEDER TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400–2800 rpm Pgodpfx Adjwc Amxexju Bar loader included!

Sąlyga: naudotas, Gamybos metai: 1993, Techninė informacija: x eiga: 400 mm Pgodpfou Idn Hsx Adxou y eiga: 300 mm z eiga: 400 mm Veleno greitis: 8000 aps./min Valdymas: Fanuc OM Tvirtinimo stalas: 500x300 mm Žurnalų vietų skaičius: 16 vnt. Įrankio tvirtinimas: SK40 Atstumas tarp darbinio veleno ir tvirtinimo paviršiaus maks.: 50-450 mm Padėklų kiekis: 2 vnt./detalė Bendras galios poreikis: 10 kW Mašinos svoris apytiksliai: 2,5 t Mašinos matmenys (IxPxA): 2,4x1,8x2,5 m Transportavimo matmenys: 2,45x1,8x2,5 m - Elektros spinta - Aušinimo įranga - Drožlių transporterio gamintojas META (transportavimo aukštis 1500 mm; plotis 200 mm) Stalo keitimo funkcija neveikia.

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 – 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on hours): 23,495 h Tool turret: 12 tools Pgjdpfxou Ix N So Adxsu Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Tool holder: cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm, hydraulic clamping Operation via dual foot switch and control panel/operator panel. Coolant system The Traub features an integrated chip conveyor with an ejection height of 1,100 mm (currently non-functional). Accessories: various small parts 8 assorted leveling feet without tailstock as is.