Tos Fn 20 pirkti naudotą (99 596)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Grandininis frezavimo/grandininių kaltų įrenginys KF20, su keliomis grandinėmis, labai geros būklės, 1,7 kW, 380 V. Mašina taikoma diferencinė apmokestinimo tvarka. Hodpfsxf Hziox Acujfn

Sąlyga: naudotas, Vise Jaw width: 200 mm Hfsdpfxsdd Tpie Acusn Jaw height: 80 mm Base plate: width (bottom) 250 mm Base plate: length (under) 500 mm Opening width: 250 mm Weight: 72 kg

Sąlyga: naujas, Shelf load capacity: 6600 kg Load capacity per level: 1100 kg Number of storage levels: 6 pcs Recommended material length: 6000 mm Frame spacing: 2 x 2000 mm Rack height: 2440 mm Compartment width: 800 mm The most suitable solution for storing long materials with 3 columns. - Each compartment can be swivelled outward, allowing loading and unloading with an overhead crane at any time. Hjdofgyhispfx Acuofn - Single-sided version. - Compartment depth: 800 mm

Sąlyga: geras (naudotas), gabaritai 2700x2400x2000 mm; Hsdeq A T Ugjpfx Acusfn indas 200 ltr; maitinimas 400 V, 50 Hz; bendra galia 66,15 kW, 133 A; 2 peilių greičiai 1500/3000 aps./min., 60,2/45,6 kW; 2 indo sukimosi greičiai; 1 maišymo greitis 130 aps./min., 1,1 kW; kėlimo įtaisas; iškrovimo įtaisas; hidraulinė sistema 0,75 kW; svoris ±3700 kg.

Gamybos metai: 2002, Sąlyga: geras (naudotas), With Heidenhain TNC 124 X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Spindle taper: SK40 Spindle speed range: 63–3150 rpm Table size: approx. 900 x 500 mm Hsdpfxjinukme Acuofn Weight: approx. 2500 kg Machine fully checked before delivery – spare parts service available.

Sąlyga: naudotas, High-current EMC filter SCHAFFNER type FS 20364-1200-99 3-phase, 3 x AC pre-mains unit, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz Rated current: 3 x 1200 A Dimensions (W x H x D): 135 x 260 x 235 mm Weight: 27.5 kg Hfsdped D Dh Aefx Acusn Very good condition, from warehouse clearance, unused 2 units available, price per unit

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 700mm/500mm/500mm, Feed rate X/Y/Z: 5000mm/5000mm/2500mm/min, Feed force X/Y/Z: 20kN/20kN/30kN. Spindle power: 7kW, Speed: 3150rpm, Spindle torque: 250Nm, Spindle mount: ISO40. Vertical table: Dimensions X/Z: 500mm/320mm, T-slot width: 14H8, Slot spacing: 50mm, Number of slots: 5. Swivel table: Dimensions X/Y: 900mm/500mm, T-slot width: 14H8, Slot spacing: 50mm, Number of slots: 10. Machine dimensions X/Y/Z: approx. 1820mm/2050mm/2175mm, Weight: approx. 2500kg, Control: Heidenhain TNC 310. Measuring probe included. Documentation available. On-site inspection possible. Hfodpfeulzliex Acusn

Sąlyga: geras (naudotas), Gamybos metai: 2004, Universal milling machine with HEIDENHAIN TNC 124 positioning control mechanical handwheels swivel tilting table ±45° hydraulic tool clamping half-cab enclosure coolant tank manual Technical details: X travel: 600 mm y travel: 400 mm z travel: 400 mm Spindle speed: 63 – 3,150 rpm Infinitely variable feed: 12–3,000 / 6–1,500 (Z) mm/min Quill stroke: 100 mm Head swivel range: ±90° Spindle taper: ISO SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Hfsdpfx Acsigm Tcoujn Machine weight approx. 2.2 t Space requirement approx. 2 x 1.9 x 1.95 m

Sąlyga: naujas, Load capacity per rack: 30,000 kg Load capacity per level: 3,000 kg Number of storage levels: 2 x 5 pcs. Recommended material length: 6,000 mm Column spacing: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): m The most suitable solution for storing long materials with 3 columns. - Each compartment can be swung outwards, enabling loading and unloading with an overhead crane at any time. - Double-sided design. Galvanized tray made of 2 mm steel sheet, length 4,000 mm: €344 Hodpfx Acefgyhbsusfn Galvanized tray made of 2 mm steel sheet, length 4,000 mm, with cut-out: €387 Divider for tray, steel: €54 Divider for arm, steel: €54 Divider for tray, stainless steel: €69 Divider for arm, stainless steel: €69

Sąlyga: naudotas, End mill, shank cutter, milling cutter - Six-flute - Finishing cutter Hedob A Rbaepfx Acuefn - Diameter: 32 mm - Usable length: 200 mm - Type: HSSE N30 - Quantity: 9 pieces - Sale: only as complete lot - Weight: 12 kg

Sąlyga: naudotas, Gamybos metai: 1999, automatic feed on all axes ACU-RITE 3-axis position display hydraulic tool clamping coolant system workplace lighting year of manufacture: 1999 Specifications Working area: - Horizontal longitudinal travel of the table (X-axis): 600 mm - Horizontal transverse travel of the milling head (Y-axis): 400 mm - Vertical travel of the table (Z-axis): 400 mm Clamping surface of the vertical table: - Length x Height: 500 x 320 mm - T-slot quantity/spacing/size: 5 / 50 mm / 14H8 Clamping surface of fixed angle table: - Length x Width: 800 x 400 mm - T-slot quantity/spacing/width: 8 / 50 mm / 14H8 Feed and rapid traverse: - Motor power/speed: 1.5 kW / 940 rpm - Number of feed rates: 18 - Feed range X and Y axes: 16 - 800 mm/min - Feed range Z axis: 8 - 400 mm/min - Rapid traverse X and Y axes: 2000 mm/min - Rapid traverse Z axis: 1000 mm/min - Max. feed force X and Y axes: 8 + 4 kN - Max. feed force Z axis: 10 + 5 kN Drive and speed horizontal spindle: - Motor power/speed: 4 kW / 1400 rpm - Number of speed ranges: 18 - Speed range: 63 - 3150 rpm - Max. permissible torque at spindle clamping: 500 Nm - Taper in spindle: SK40 Hydraulic unit: - Operating pressure tool clamping circuit: 10 MPa - Pump motor power/speed: 0.55 kW / 1395 rpm - Tank capacity: 15 l - Pump delivery rate: 2.3 l/min Coolant system: Hfedpfxjvtzkxj Acusn - Pump motor output: 0.09 kW - Pump operating pressure: 0.04 MPa - Max. fluid delivery by pump: 25 l/min - Max. fluid throughput at outlet: 7 l/min - Tank capacity: 40 l Required power supply: - Operating voltage/frequency: 3x 400V / 50 Hz - Power consumption: 8.0 kW - Nominal fuse rating (user side): 20 A - Control voltage: 24 V Machine dimensions: - Dimensions W x H x D: 1975 x 1910 x 1810 mm - Machine weight incl. angle table and vertical milling head: 2200 kg

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 115090324, Three-jaw power chuck Manufacturer: AUTOStrong, similar to KITAGAWA, size approx. ø 200 mm. Type N208; Bore diameter approx. ø 50 mm Jaw interface 1.5 x 60° Flange size A2-6, cone diameter approx. 106 mm ----- Suitable for use on CNC lathes such as OKUMA, MAZAK, MORI, and many others. The chuck has been cleaned, inspected, and serviced. Cylindrical mount for spindle flange KK6 - approx. ø 108 mm Hsdpfx Acei Hqhqsujfn with thread for drawtube M60x2.0 mm Jaw interface: 1.5 x 60° Weight without clamping jaws approx. 30 kg.

Sąlyga: naudotas, used Manufacturer: Haffner Model: KF20 Wall-mounted machine Workpiece support Lubrication device Total connected load: 1.5 kW Location: 97447 Gerolzhofen Hfedpfx Acovwf T Esuen Transfer in as-is condition as inspected. No repair work carried out. Collection on short notice. – loaded free of charge –

Sąlyga: naudotas, Gamybos metai: 2000, x-travel: 600 mm y-travel: 400 mm Hfedpfx Aceux Agieujn z-travel: 400 mm Clamping surface of table: 800 x 400 mm Spindle taper: SK 40 Control: HEIDENHAIN TNC 310 Spindle speeds: 10 - 3150 rpm Spindle motor: 5.5 kW Feed rates - longitudinal & cross: 1 - 5000 mm/min Feed rates - vertical: 0.5 - 2500 mm/min Rapid traverse: 6 / 6 / 3 m/min Total power requirement: 10 kVA Machine weight approx.: 2.5 t Machine dimensions (L x W x H): 2.16 x 1.70 x 2.0 m Accessories: fixed table, swiveling vertical head with hydraulic tool clamp and extendable quill, electronic handwheel, coolant device

Sąlyga: naujas, Load capacity per rack: 36,000 kg Load capacity per level: 3,000 kg Number of storage levels: 2 x 6 units Recommended material length: 6,000 mm Hfodofgyhcjpfx Acusn Upright spacing: 2,000 mm Rack height: 2,440 mm Shelf width: 500 mm Dimensions (L x W x H): 4.8 x 2.55 x 2.5 m The optimal solution for storing long materials with 3 uprights. - Each shelf swings outwards, allowing for easy loading and unloading with an overhead crane at any time. - Double-sided design.

Sąlyga: naudotas, Indexable insert drill, high-performance drill with indexable inserts, solid drill, end mill, shank cutter, milling cutter, indexable insert milling cutter, shank cutter with internal cooling, indexable insert shank cutter - End mills: Indexable insert shank cutters with internal cooling, 8 pieces Hjdork S Dqopfx Acuefn - Mount: Ø 32 mm - Diameter: 32 to 43 mm, see photos / item list - Sale/price: complete - Transport dimensions: 400/200/H60 mm - Weight: 8.7 kg

Sąlyga: geras (naudotas), Technical data: Motor: 1.5 kW Voltage (three-phase): 220/380 V / 50 Hz Speed: 2800 rpm Max. mortising depth: 150 mm Max. slot length: approx. 170 mm Hfodpfx Ajwm Dlkscuen Max. chain width: 40 mm Max. longitudinal table travel: 160 mm Max. transverse table travel: 90 mm Tilting angle: 5 degrees Weight, machine: 72 kg Weight, stand: 35 kg Approx. dimensions (HxWxL): 190 x 54 x 60 cm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 5 h, Pass-through injector blasting machine for sweeping profiles and pipes, equipped with roller conveyors on both the left and right sides. Hodpfxswkd Tie Acusfn

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed range: 63 - 3,150 rpm Infinitely variable feed: 12-3000 / 6-1500 (Z) mm/min Hjdpek Hdu Djfx Acusfn Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with path control, mechanical handwheels, rotatable tilting table +/- 45°, hydraulic tool clamping, semi-enclosure, coolant tank, manual

Sąlyga: naujas, Shelving unit load capacity: 42,000 kg Hedpfsfgyhdjx Acuefn Load capacity per level: 3,000 kg Number of storage levels: 2 x 7 pcs Recommended material length: 6,000 mm Frame width: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): __ m The most suitable solution for storing long materials with 3 uprights. - Each tray can be swung outwards, allowing for loading and unloading with the overhead crane at any time. - Double-sided design.

Sąlyga: naudotas, Indexable insert drill, high-performance drill with indexable inserts, solid drill, end mill, shank cutter, milling cutter, indexable insert milling cutter, shank cutter with internal cooling, indexable insert shank cutter - Delivery: as-is condition as inspected - Indexable insert: 1 piece missing - End mill: indexable insert shank cutter with internal cooling Hsdperk S D Aefx Acusfn - Mount: Ø 30 mm - Diameter: 16 mm - Dimensions: 133/40/H40 mm - Weight: 0.4 kg

Sąlyga: naujas, Load capacity rack: 15,000 kg Load capacity per level: 3,000 kg Number of storage levels: 5 pcs Recommended material length: 6,000 mm Frame spacing: 2 x 2,000 mm Rack height: 2,440 mm Dimensions (L x W x H): m The optimal solution for storing long materials with 3 uprights. - Each compartment can be swung outward, allowing loading and unloading with an overhead crane at any time. - Single-sided design. Galvanized tray made of 2mm steel sheet, length 4,000mm: €344 Galvanized tray made of 2mm steel sheet, length 4,000mm, with cut-out: €387 Hjdpfx Ajfgyg Eocujfn Distributor for tray, steel: €54.00 Distributor for arm, steel: €54.00 Distributor for tray, stainless steel: €69.00 Distributor for arm, stainless steel: €69.00

Sąlyga: naudotas, insert drill, high-performance drill with indexable inserts, solid drill, end mill, shank cutter, milling cutter, indexable insert cutter, shank cutter with internal cooling, indexable insert shank cutter Hfedperk S Dxofx Acujn -End mill: indexable insert shank cutter with internal cooling, 2 pieces -Mounting: Ø 25 mm -Diameter: 25 and 30 mm -Offer/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0 kg

Sąlyga: naujas, Load capacity per rack: 18,000 kg Load capacity per level: 3,000 kg Number of storage levels: 6 pcs Recommended material length: 6,000 mm Frame spacing: 2 x 2,000 mm Rack height: 2,440 mm Dimensions (L x W x H): m (please specify value) The most suitable solution for storing long materials with 3 columns. - Each compartment can be swung outwards, allowing for loading and unloading with an overhead crane at any time. - Single-sided design. Galvanized tray made of 2 mm steel sheet, length 4,000 mm: €344 Galvanized tray made of 2 mm steel sheet, length 4,000 mm, with cut-out: €387 Divider for tray, steel: €54.00 Divider for arm, steel: €54.00 Hfedpfx Aefgyg Hocuon Divider for tray, stainless steel: €69.00 Divider for arm, stainless steel: €69.00

Sąlyga: naujas, Rack load capacity 21,000 kg Load capacity per level 3,000 kg Number of storage levels 7 pcs Recommended material length 6,000 mm Frame width 2 x 2,000 mm Rack height 2,440 mm Hodpfx Aofgyg Iscuefn Dimensions (L x W x H) m The most suitable solution for storing long materials with 3 columns. - Each compartment can be swivelled outward, allowing loading and unloading by overhead crane at any time. - Single-sided design. Galvanized tray, 2 mm steel sheet, length 4,000 mm, €344 Galvanized tray, 2 mm steel sheet, length 4,000 mm, with cut-out €387 Distributor for tray, steel €54.00 Distributor for arm, steel €54.00 Distributor for tray, stainless steel €69.00 Distributor for arm, stainless steel €69.00