Thermostat pirkti naudotą (214)

Būklė: geras (naudotas), Vacuum oven, chamber oven Ihedpfxsif Sbio Agfew - Vacuum oven: equipped with vacuum pump - Chamber size: L500/W400/H400 mm - Thermostat: up to max. 320°C - Vacuum pump: power 1.1 kW - Overall dimensions: 890/800/H1785 mm - Weight: 180 kg - Control: Two-point control via program controller

Būklė: naudotas, Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling compressor, compressor, filter drier shell, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange Isdjfyh D Tjpfx Agfjhw - Manufacturer: Alco, filter drier, unused in original packaging - Type: ADK-084/PCN 003610 - Connection: 12 mm flare - Package dimensions: 175/70/H70 mm - Weight: 0.6 kg

Būklė: geras (naudotas), electric heater, electric radiator, heating coil, electric heating unit, panel storage heater, panel heater -Manufacturer: Wibo, panel heater type thermatic 1000 with thermostat -Power rating: 1000 watts Iodpsudqcyefx Agfshw -Voltage: 220 V -Quantity: 2 heaters available -Price: per unit -Dimensions: 800/110/H620 mm -Weight: 20 kg/unit

Būklė: naudotas, Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat Ijdpfx Asqlgu Ijgfshw -Manufacturer: Danfoss, unused thermostat temperature switch in original packaging -Type: KP 75 060L1137 -Differential: 2.5–10 K -Quantity: 1x thermostat available -Carton dimensions: 190/140/H45 mm -Weight: 0.5 kg

Būklė: labai geros būklės (naudotas), Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange, dual pressure switch -Manufacturer: Johnson Controls, dual pressure switch, unused in original packaging -Type: P78MCS-9300 -Price: per unit Ihsdpfsfyfw Tsx Agfow -Quantity: 2 units -Package dimensions: 130/130/H70 mm -Weight: 0.7 kg/unit

Būklė: labai geros būklės (naudotas), Šaldymo kompresorius, šaldymo aparatas, šaldymo kompresorius, šaldymo agregatas, šaldymo kompresorius, kompresorius, filtrinio džiovintuvo korpusas, uždarymo vožtuvas, rutulinis uždarymo vožtuvas, temperatūros jungiklis, termostatas, išsiplėtimo vožtuvas, saugos vožtuvas - Gamintojas: Hansa, saugos vožtuvas, nenaudotas originalioje pakuotėje - Tipas: KSV 28 bar 2442280050 Isdpsfyfxbefx Agfshw - Jungtis: G1/2" - Kaina: už vienetą - Kiekis: 7 vnt. - Pakuotės matmenys: 150/80/H55 mm - Svoris: 0,6 kg/vnt.

Gamybos metai: 2017, būklė: labai geros būklės (naudotas), TOOL-TEMP TT-142 N – pilna komplektacija & Isdpfxjx E Uqbo Agfehw

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 22-009, Rotary Spray Parts Cleaning Machine YM-850 The YM-850 rotary spray cleaning machine is designed for the efficient cleaning of industrial components using hot pressurized water and biodegradable detergents. This unit boasts exceptionally low operating costs and minimal consumption. The machine frame and body are manufactured from high-grade, corrosion-resistant stainless steel. It is the ideal solution for removing oil, grease, and production residues from the surfaces of workpieces, as well as for corrosion protection applications. The YM machine comes standard with a stainless steel pump, spray nozzles, heating elements, and a motorized basket assembly. - Spray cleaning system for small to medium batch sizes - Suitable for workshops, maintenance, and interim cleaning processes - Cleaning with hot water Isdpfx Astwmxyegfohw - Top-loading spray cabin Technical Specifications: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating power: 7.5 kW Max. loading weight: 120 kg Connection: 220-380 Volt, 3-phase Timer: 0-30 min Thermostat: 0-60 °C Stainless steel body: 430 AISI Filter cups: 2 pcs, 2-3 mm perforation Internal filter: 100 µ

Būklė: labai geros būklės (naudotas), CTS 3G C 400* – Hot Water Boiler for Superheated Water, Manually Fed with Wood Waste Thermal capacity: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Fitted with control thermostat, safety thermostat, and thermometer. Fuel type: wood waste. Iedpfxjw Ev Twe Agfehw Exhaust system: cyclone separator, forced draft fan, connection ductwork. Steaming Chamber Net Capacity: 100 m³/batch. Type DVK-I 100 m³ – 1 pc, dimensions: 8.5 x 9 m, height 4.3 m. Control unit: Baschild Italy. Sliding door. Oxyvent overpressure system. Stainless steel tanks and radiators on three sides. Includes turnkey connections between boiler and steamer, and complete boiler room equipped with distributor, manifold, pumps, expansion tank, etc.

Būklė: geras (naudotas), Elektrinė kepimo plokštė su atvira apatiniu rėmu Su 2 šildymo zonomis, po 4,2 kW kiekviena Kiekvienos šildymo zonos darbo temperatūra termostatiškai reguliuojama nuo 120 iki 280°C Kepimo paviršius, riebalų nutekėjimo palengvinimui, palenktas 1,5° kampu į priekį Priekinė ir viršutinė plokštė iš 1,5 mm storio CNS, šonai ir galas iš nerūdijančio plieno Ihedsxvy Hyspfx Agfsw Scotch-Brite apdaila, apvalinti kampai iš visų pusių IPX4 – apsauga nuo vandens purslų Standartiškai komplektuojama su riebalų surinkimo talpa ir 3-jų pusių nerūdijančio plieno purslų apsauga Reguliuojamo aukščio kojos (+50 mm) Išoriniai matmenys (P x G x A): 800 x 700 x 850 mm Plokštės matmuo (P x G): 730 x 540 mm Spintelė (P x G x A): 680 x 640 x 420 mm Svoris: 80 kg Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos – pagal užklausą!

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, galia: 7,63 kW (10,37 AG), bendras plotis: 2 300 mm, bendras ilgis: 4 000 mm, bendras aukštis: 3 000 mm, įvesties srovės tipas: trifazis, slėgis: 6 juosta, įėjimo įtampa: 400 V, nominali šilumos galia: 950 kW (1 291,64 AG), darbinis slėgis: 6 juosta, Įranga: Tipinė plokštelė prieinama, karštas vanduo, The Pyrtec boiler system features an underfeed stoker with an internal grate and burnout grate designed for universal application, making it particularly suitable for a wide range of fuels, from dry wood waste to wet forest wood chips. Max. water content w = 50% corresponds to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED SCREW WITH BARRIER LAYER: The feed screw conveys the fuel into the firebed and grate area of the combustion block. The robust screw flights in the firebed area are made of heat-resistant chrome steel. The feed pipe is equipped with mounts for the back-burn thermostat and thermal extinguishing valve. Above the screw is the metering hopper with photoelectric sensor for level control of the fuel barrier layer, as required by TRD 414. The drive is provided by a maintenance-free helical gear motor with chain drive and dustproof chain guard. Accessories: Extinguishing valve with dirt trap. COMBUSTION BLOCK: The massive combustion block is multiply insulated with high-quality fireclay lining. The fuel feed and grate section consists of the firebed, degassing grate, and descending burnout grate. All these parts are made of highly heat-resistant cast steel (material no. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion has proven itself especially for challenging fuels (moist sawmill residues, high bark content, etc.). Ash and foreign objects that fall through the grates can be easily removed from the outside via openings with sealed covers. The horizontal combustion chamber is optimally shaped for complete burnout and offers a large ash space. The furnace door is solidly built, very well insulated, and can be swung out for maintenance thanks to the heavy-duty double hinge. BOILER: Horizontal hot water boiler with three-pass design, mounted on the combustion block, insulated and elegantly clad. The insulated boiler front door allows for the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed as an axial cyclone, fully insulated and attached to the boiler. Includes 2 insulated cleaning covers, quick-release ash container, and attachment flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Also of axial cyclone design, fully insulated, free-standing for optimal placement. Includes 2 insulated cleaning covers, attachment flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Iedpoxwhw Ajfx Agfjhw Fan specifically designed for wood combustion operation, very quiet, motor constructed in a robust, heat-resistant version with spring-mounted heat-dissipating hub. The fan housing can be infinitely rotated at the intake nozzle, outlet nozzle is round.

Būklė: naudotas, rida: 782 291 km, galia: 228 kW (309,99 AG), pirmoji registracija: 02/2008, kuro tipas: dyzelinas, sėdimų vietų skaičius: 61, pavaros tipas: automatinis, emisijos klasė: Euro 4, spalva: balta, stabdžiai: retarderis, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas,

Būklė: naudotas, Šis pasiūlymas skirtas Thermo Scientific Vanquish UHPLC sistemai. Įrenginys yra visiškai veikiantis ir paruoštas naudojimui iš karto. Apžvalga: Thermo Scientific Vanquish UHPLC sistemos 1. Automatinis mėginių paėmėjas (autosampleris) Paskirtis: Automatiškai įveda mėginį į judančios fazės srautą. Ihsdpfx Agoxhfkzjfew Paima mėginius iš vialų, plokštelių arba mėgintuvėlių. Tiksli injekcija (dažniausiai nL–µL diapazone). 2. Siurblio modulis Paskirtis: Paduoda judančią fazę (tirpiklį) dideliu slėgiu per sistemą. Dvejetainis siurblys: Maišo du tirpiklius aukštu slėgiu – idealus greitiems gradientams. Ketvirtinis siurblys: Maišo iki keturių tirpiklių žemu slėgiu – didesnis lankstumas, bet lėtesni gradientai. Reguliuoja srauto greitį (pvz., 0,001–5,000 ml/min). Suteikia galimybę gradientinei eliučijai (keitimas tirpiklio sudėties laikui bėgant). 3. Detektoriaus modulis (x2) Paskirtis: Nustato ir matuoja analizatus, pasirodančius iš kolonos. Diodinės matricos detektorius (DAD/UV-Vis) – dažniausiai naudojamas; aptinka UV sugeriančias medžiagas. Fluorescencinis detektorius – skirti fluorescuojantiems junginiams. Kraičio aerozolio detektorius (CAD) – universalus UV nesugeriančių junginių nustatymas. Lūžio rodiklio detektorius – tinkamas cukrams, polimerams. MS (masių spektrometras) – pažangus, itin jautrus aptikimas. Thermo Fisher Vanquish platformoje yra kelios versijos, pritaikytos įvairiems analitiniams poreikiams – nuo įprastinės HPLC iki itin aukšto našumo ir mažo srauto LC–MS sričių: Vanquish Flex UHPLC: Lankstus HPLC/UHPLC metodų kūrimui ir darbui iki 1000 bar slėgio. Palaiko dvejetainius, ketvirtinius ir dvigubus siurblius, tirpiklio lygio stebėjimą ir pasirenkamą jutiklinį ekraną. Vanquish Horizon UHPLC: Išskirtinai našus – iki 1500 bar slėgis, itin mažas gradientinės delsos tūris, biologiškai suderinami takai, išskirtinis laikų ir detektorių jautrumo stabilumas. Vanquish Neo UHPLC: Sukurtas naujos kartos mažo srauto LC‑MS darbams (nano‑, mikro‑srautui), užtikrina didelį jautrumą ir darbo patikimumą. Vanquish Analytical Purification LC: Skirtas tiksliam frakcionavimui – aukštas slėgis (700–1500 bar), reguliuojamas srautas (iki 10 ml/min), integruotas frakcijų kolekcionierius, įvairialypis aptikimas, išplėstinė automatizacija. Pagrindinės platformos savybės: Modulinė konstrukcija: Pasirinkite komponentus (siurbliai, mėginių paėmėjai, detektoriai, termostatiniai įrenginiai), kad sukonfigūruotumėte sistemą pagal poreikį. Dauguma modelių turi biokompatibilius srauto takus bei Viper beįrankius jungiklius itin mažai negyvam tūriui. Temperatūros valdymas: Didelio našumo kolonų skyreliai su aktyviu/pasiviu šildymu, prieššildymu ir po kolonos aušinimu – frikcinės šilumos kontrolei bei atkuriamumui pagerinti. Aptikimo pasirinkimai: Tiekiami diodiniai matricos (su LightPipe optika didesniam jautrumui), kraičio aerozolio (CAD) beveik universaliam aptikimui, fluorescenciniai, daugiabangiai, lūžio rodiklio ir masių spektrometrijos detektoriai. Programinės įrangos integracija: Pilnai suderinama su Chromeleon CDS (su SII greitam MS integravimui), taip pat Xcalibur ir TraceFinder LC‑MS darbams. MS integracija: Vanquish sistemos tiesiogiai sujungtos su Thermo MS platformomis – Triple Quadrupole ir Orbitrap – didelio jautrumo ir tikslumo masių analizėms. Eksploatacinė grąža (ROI): Thermo pažymi mažesnes neplanuotas remonto išlaidas, geresnį produktyvumą ir tvarumą naudojant atsinaujinančiąją energiją gamyboje.

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, galia: 121 kW (164,51 AG), tūrio srautas: 7 350 m³/val, nominali šilumos galia: 110 kW (149,56 AG), bakelio talpa: 1 000 l, kuras: dyzelinas, 10 vnt. mobilių šildytuvų, kaip nauji, nenaudoti, originalioje pakuotėje, pagaminti 2022 m. REMKO CLK 120 su alyvos degikliu ir alyvos talpa. Kiekvienas su drėgnų patalpų termostatu, tipas RT-5. Oro paskirstymo galvutė, 2 išėjimai po Ø 400 mm. Po 2 karšto oro žarnas po 7,6 m kiekvienam įrenginiui, su uždarymo diržu, Ø 405 mm. Vieno vamzdžio alyvos paėmimo komplektas 1000 litrų talpai. Įeina greitos jungtys ir įrenginio prijungimo žarna. Alyvos talpa, dyzelino talpa, šildymo alyvos talpa, sandėliavimo talpykla. Dvigubų sienelių kombinuota PE talpa VET, talpa 1000 litrų. Iedpexgn Dzjfx Agfshw

Būklė: naudotas, Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, garantijos trukmė: 12 mėnesiai, įėjimo įtampa: 400 V, bendras aukštis: 1 250 mm, bendras plotis: 1 000 mm, bendras ilgis: 1 080 mm, triukšmo lygis: 65 dB, We offer for sale the PC 60/130 T Parts Washer Catalog number: 1.626-704.0 Year of manufacture: 2016 All devices purchased from us are covered by a 12-month WARRANTY. Equipment included: • Operating hours counter • Stainless steel safety grate • Swiveling caster wheels, 2 lockable • Timer switch • Water level control Technical data: • Pressure: 1.5 / 0.15 bar / MPa • Pump capacity: 4,500 l/h • Power supply: 5.5 kW • Working diameter: 600 mm • Working height: 310 mm • Casing / frame: Stainless steel (1.4301) • CE tested • Heater output: 4.5 kW • Max. temperature: 80°C Ihedpfxswzwuze Agfow • Adjustable washing time: 1 / 30 min • Load capacity: 130 kg • Sound pressure level: 65 dB(A) • Tank volume: 100 l • Number of phases: 3 Ph • Frequency: 50 Hz • Voltage: 400 V • Dimensions (L x W x H): 1080 x 1000 x 1250 mm The washing process is fully automated, and user-friendly operation is ensured by a clear control panel and indicator lights displaying all work stages. The washing liquid temperature is maintained between 35 and 80°C and is controlled via thermostat. Thanks to special housing profiles (mechanical labyrinth seals), the PC 60/130 T does not require short-lived rubber seals. Gas struts (with dampers) guarantee effortless lid opening, and a ball valve makes draining the washing liquid easy. The Kärcher parts washer works in a closed-circuit system (by means of an electric pump) with a water-based, non-solvent cleaning solution, ensuring operators are not exposed to toxic gas emissions.

Būklė: paruoštas naudoti (naudotas), Der Thermo ALPS 30 manuelle Heißsiegler schützt Ihre Proben während der PCR oder Lagerung zuverlässig vor Verdunstung und Kontamination. Der manuelle Heißsiegler ALPS30 eignet sich ideal zum Versiegeln kleiner Plattenchargen bei Anwendungen mit geringem bis mittlerem Durchsatz und ist so kompakt, dass er bequem auf der Laborbank Platz findet, ohne übermäßig viel Raum einzunehmen. Mit dem Thermo Mikrotiterplatten-Heißsiegler lassen sich Proben mühelos vor Kontamination und Verdunstung schützen. Der Thermo ALPS 30 Heißsiegler ist mit nahezu allen Höhen von Mikrotiterplatten, Blöcken und PCR-Platten kompatibel. Der ALPS30 kann mit einer großen Auswahl an Thermo Siegelfolien verwendet werden, darunter durchstechbare, optisch klare und permanente Siegel, um den maximalen Schutz für Ihre Proben zu gewährleisten. Zusätzlich ist der Thermo Mikrotiterplatten-Siegler mit einem integrierten Thermostat für präzise Temperaturregelung ausgestattet und verfügt über eine LED-Anzeige, die signalisiert, wenn das Gerät eingeschaltet und aufgeheizt ist. Wichtige Merkmale des Thermo ALPS30 Heißsiegler: - Kompaktes Tischgerät - Manuelle Bedienung - Adapter erhältlich - Kompatibel mit den meisten Höhen von Mikrotiterplatten, Blöcken und PCR-Platten - Kompatibel mit einer großen Auswahl an Thermo Siegelfolien - Durchstechbare Siegel - Optisch klare Siegel Ihedsx Rhr Aopfx Agfjw - Permanente Siegel - Verhindert Kontamination - Verhindert Verdunstung - Integrierter Thermostat - LED-Anzeige: Betrieb & Aufheizen Gebrauchten Thermo ALPS30 Heißsiegler kaufen.

Būklė: naujas, Gamybos metai: 2025, bendras aukštis: 4 000 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, garantijos trukmė: 24 mėnesiai, temperatūra: 80 °C, oro poreikis: 36 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 345 kW (469,07 AG), galia: 40 kW (54,38 AG), kuras: suskystintos naftos dujos (LPG), energijos suvartojimas: 40 kWh, izoliacinė medžiaga: Mineralwolle, izoliacijos storis: 50 mm, nominali galia: 345 kW (469,07 AG), Įranga: apšvietimas, MAIN STANDARD Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes in the booth are managed via a PLC system, ensuring that the desired parameters are consistently maintained. FUNCTIONAL PRINCIPLES OF THE BOOTH The processes within the booth are operated using a control panel that manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at external temperature. The air is then expelled through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before release. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this process, fresh outside air continues to circulate in the booth. Ihjdpfjwzmcbsx Agfow DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and introduced to the booth via a distributor. As 20% of solvent is released during drying, it is expelled together with this exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted via the control panel as required. COOLING PROCESS After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates within the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices installed in the booth. The panel is constructed from durable galvanized sheet and steel profiles, and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel includes essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. • Operating equipment runs on 380 V 50 Hz, while control units use 220 V. • Booth operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time settings for paint flashing, intermediate drying, and final drying can be easily adjusted via the digital display on the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Būklė: geras (naudotas), Agilent HPLC sistema – įskaitant kompiuterį ir programinę įrangą Sąrašo kaina apima šiuos 1100 serijos modulius: - mėgintuvėlių padėklas - dujų pašalintojas (degasser) Ihodpfx Agjvk U Ncofjw - siurblys - automatinis mėginių įvediklis (autosampler) - kolonų termostatas (column oven) - VWD detektorius Pagal Jūsų poreikius galime komplektuoti beveik bet kokią HPLC sistemą. Dėl tikslios kainos kreipkitės atskirai. Turimi moduliai: Gamintojas Serija Modelis Tipas Kiekis Agilent 1100 G1310A ISO siurblys 1 Agilent 1100 G1311A Keturių kanalų siurblys (Quat pump) 4 Agilent 1100 G1313A Automatinis mėginių įvediklis (ALS) 1 Agilent 1100 G1314A VWD detektorius 7 Agilent 1100 G1315A DAD detektorius 1 Agilent 1100 G1315B DAD detektorius 4 Agilent 1100 G1316A Kolonų termostatas 1 Agilent 1100 G1318A Kolonų termostatas 6 Agilent 1100 G1329A ALS 1 Agilent 1100 G1330A ALS termostatas 1 Agilent 1100 G1330B ALS termostatas 1 Agilent 1100 G1361A Preparatyvinis siurblys 2 Agilent 1100 G1367A Mikroplokštelių automatinis mėginių įvediklis 4 Agilent 1100 G1376A Kapiliarinis siurblys (CAP pump) 1 Agilent 1100 G1379A Dujų pašalintojas (degasser) 4 Agilent 1100 G1379B Dujų pašalintojas (degasser) 4 Agilent 1100 G2260A Preparatyvinis ALS 1 Agilent 1200 G1315D DAD detektorius 1 Agilent 1200 G1330B Frakcionavimo kolektorius/ALS termostatas 1 Agilent 1200 G1364C Analitinis frakcionavimo kolektorius 1 Agilent 1200 G1367B Mikroplokštelių ALS 1 Agilent 1260 G1314F VWD detektorius 1 Agilent 1290 G1330B Termostatas 2 Jei turite klausimų – kreipkitės. Taip pat peržiūrėkite kitus mūsų pasiūlymus.

Būklė: reikia remonto (naudotas), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Product Description: For sale is a HAAKE RheoStress 6000 rotational rheometer from Thermo Scientific – a high-precision measuring instrument for the rheological characterization of a wide range of materials. Ideally suited for use in research, development, or quality control. Please note: The device is not operational as the air bearing is defective. Technical Specifications: - Angular resolution: 12 nrad (internal resolution) - Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 min⁻¹ - Speed range (CS mode): 10⁻⁷ to 1500 min⁻¹ - Torque range: max. 0.20 Nm / min. 200 nNm (rotational & oscillatory) - Frequency range (oscillation): 10⁻⁵ to 100 Hz - Normal force: 0.01 – 50 N (resolution: 0.001 N) - Temperature range: –60 °C to +400 °C (with appropriate thermostat) - Dimensions (W × D × H): 400 × 400 × 780 mm - Weight: approx. 42 kg Special Features: - Very high measuring accuracy due to low moment of inertia - Precision lifting device (0.5 µm adjustment accuracy) - Modular upgrade options (High Shear, RheoAdaptive Control) - Compatible with various thermostats Scope of Delivery: - HAAKE RheoStress 6000 base unit - Power cable - Software Condition: used Ijdpfowv Nrhox Agfjhw Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have any questions, we would be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Huber Model: 030TW Ihedpfew S Efbjx Agfow Huber Unichiller 030TW – Recirculating Chiller / Cooling Thermostat For sale is a Huber Unichiller 030TW, a powerful and efficient recirculating chiller for laboratory and industrial applications. The unit is designed for continuous operation and provides consistent cooling performance with high energy efficiency. Features & Functions: - Modern touchscreen control with favorites, timer, data logging, and remote control options - Robust, closed cooling system for reliable continuous operation - Environmentally friendly refrigerant - Suitable for ambient temperatures up to +40 °C - Ideal for laboratory, chemical, technical, and process cooling applications Technical Data: - Temperature range: –20 °C to +40 °C - Temperature stability: ±0.5 K - Cooling capacity: 3 kW at +15 °C 2.75 kW at 0 °C 2 kW at –10 °C 1 kW at –20 °C - Circulation pump: max. 30 l/min at 4.1 bar - Controller: Pilot ONE touchscreen controller (5.7″ color display) - Connections: Ethernet, USB, RS-232, Pt100 - Refrigerant: R449A (CFC- and HCFC-free, environmentally friendly) - Dimensions (W × D × H): 400 × 440 × 1230 mm - Weight: approx. 137 kg - Condition: used Scope of delivery: (see picture) - Huber Unichiller 030TW - Power cable (Specifications and details subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Būklė: naujas, IPETRONIK Interior Simulation Box We offer you an IPETRONIK Interior Simulation Box. Ihjdolypy Ejpfx Agfew Technical data and system description: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It features a variable internal volume from 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. With the interior simulation box, only rear evaporators installed in the passenger compartment are tested. The insulated enclosure is mounted on an aluminum profile frame with casters. A light is installed inside the chamber. The box is protected against overheating by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed and the system is stopped. (TRIP TEMPERATURE: 80°C) Technical data of the insulation chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm polyurethane rigid foam, CFC-free foaming, U-value 0.27 W/m2K, Building material class B1 according to DIN 4102 System technical data and description: Connection: tongue and groove system with foamed-in eccentric latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM-pattern, slip-resistant, Floor perimeter angled 90° (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, 1,500 N / rubber wheel load capacity (support area > 4 cm²), 30,000 N/m² surface load, floor joints fully welded, welded stainless steel pipe as floor drain, directed downwards through the floor Chamber door: Hatch door, single-leaf, 800 x 1200 mm clear opening, DIN left, heated door frame (230 V), Silicone-free heating tapes, four-sided EPDM gasket, Pressure lever lock, lockable, emergency release, Heated inspection window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled on-site, silicone-free edge band Movable wall: 1680 x 1180 mm, 80 mm polyurethane rigid foam, both sides 0.8 mm stainless steel sheet 1.4301, ground, grain 320, with protective film, enclosed by sheet metal all around (The rear wall can be adjusted manually and steplessly to change the volume) Recirculation system: For temperature control, a heat exchanger (Systemair) is integrated in the recirculation duct for indirect temperature regulation. Air circulation is provided by a radial inline fan (Cosmo), heating is supplied by an electric heater (Türk and Hillinger) integrated in the brine circuit. The heaters are continuously monitored by temperature sensors and limiters (Türk and Hillinger, Johnson Controls). Cooling is achieved via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electric heating power: 1 x 6kW. Mixing ratio: 50% water / 50% ethylene glycol. Feed from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Main fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data and information!) If you have further questions, we will be happy to assist you by phone.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, darbinis slėgis: 250 juosta, aukšto slėgio žarnos ilgis: 10 000 mm, kuras: super 95, bendras svoris: 56 kg, garantijos trukmė: 24 mėnesiai, Technical Specifications: - Pump performance (l/h): 900 - Operating pressure (bar): 250 - Maximum pressure (bar): 300 - Water connection: R 3/4″ - Drive type: Petrol - Engine type: G390FA - Mobility: High - Colour: anthracite - Weight with accessories (kg): 56.8 Ihsdpfx Agjwiwv Ijfew - Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of Delivery: - Spray gun - High-pressure hose length: 10 m - Power nozzle - Water filter Equipment: - Protective frame - Crankshaft pump with ceramic pistons Independence: - Independent of external power sources. Complies with EU Stage V emission standards. Convenient manual start. High Mobility: - Large inflatable wheels for comfortable use on difficult terrain. The compact and small unit can be easily manoeuvred even in the tightest spaces. Fits in a car. Robust and Durable Machine: - The sturdy tubular frame protects the pump from damage. Thermal valve protects the pump from overheating during circulation mode. Crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic cold water high-pressure cleaner is the ideal entry-level choice for those looking to use petrol-powered equipment. The machine can be easily transported in a car and enables successful completion of even the most demanding cleaning tasks, for example on construction sites or in municipal applications. The unit offers an operating pressure of up to 250 bar and is equipped with a durable crankshaft pump with a flow rate of 900 litres per hour. User-friendly operation is ensured by the integrated petrol engine (EU STAGE V) which allows operation independent of external power sources, inflatable wheels which provide the necessary mobility on site, an ergonomic handle for easy transport, and practical onboard storage for accessories. Key components are easily accessible for maintenance and effectively protected by thermal and safety valves. The robust steel frame of the HD 9/25 G Classic also prevents external and mechanical damage. The unit does not have the capability to draw water from alternative sources.

Būklė: naujas, darbinis slėgis: 150 juosta, aukšto slėgio žarnos ilgis: 10 000 mm, kuras: super 95, bendras svoris: 44 kg, garantijos trukmė: 24 mėnesiai, Technical Data: Pump performance (l/h): 600 Operating pressure (bar): 150 Maximum pressure (bar): 200 Water connection R 3/4″ Drive type: Petrol Engine model: G200FA Mobility: High Colour: anthracite Weight with accessories (kg): 42.5 Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of delivery: Spray gun: Standard High-pressure hose length: 10 m Power nozzle Features: Protective frame Crankshaft pump with ceramic pistons Ihjdpfxsv Txaws Agfjw Independence: Independent of external power sources. Complies with EU Stage V emission standards. Convenient hand start. High mobility: Large inflatable wheels, perfect for rough terrain. The compact and lightweight unit is easy to manoeuvre even in very confined spaces. Fits in a car. Robust and durable equipment: The sturdy tubular frame protects the pump from damage. Thermovalve protects the pump from overheating during recirculation. Crankshaft pump with ceramic pistons. The compact Kärcher HD 6/15 G Classic cold water high-pressure washer is the ideal choice for beginners using petrol-powered equipment. The unit can be easily transported in a car and enables efficient completion of even the most demanding cleaning tasks, such as on construction sites or in municipal applications. It allows operation at up to 150 bar working pressure and is equipped with a durable crankshaft pump with a flow rate of 600 litres per hour. User-friendly features include an integrated petrol engine (EU STAGE V), enabling fully independent operation wherever you are, inflatable wheels for excellent jobsite mobility, an ergonomic handle for easy transport, and practical storage space for accessories. Key components are easily accessible for maintenance and effectively protected by thermostat and safety valves. The robust steel frame of the HD 6/15 G Classic also provides protection against external and mechanical damage. Note: This device does not have the capability to suck water from alternative sources.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, darbinis slėgis: 200 juosta, aukšto slėgio žarnos ilgis: 10 000 mm, tuščias svoris: 43 kg, kuras: super 95, garantijos trukmė: 24 mėnesiai, Technical specifications: Pump capacity (l/h): 700 Operating pressure (bar): 200 Maximum pressure (bar): 250 Water connection: R 3/4″ Drive type: Petrol Engine model: G210FA Mobility: High Colour: Anthracite Weight with accessories (kg): 43 Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of delivery: Kärcher Classic spray gun – M22 thread High-pressure hose: 10 m Kärcher Classic lance 850 mm 25° power nozzle Water filter Equipment: Isdpfx Aew Exv Ijgfshw Protective frame Crankshaft pump with ceramic pistons Independence: Operates independently of external power sources. Complies with EU Stage V emission standards. Convenient manual start. High mobility: Large inflatable wheels for easy transport over difficult terrain. The compact and small device can be easily manoeuvred even in confined spaces. Fits into a car. Robust and durable: The sturdy tubular frame protects the pump from damage. A thermal valve protects the pump from overheating during recirculation. Crankshaft pump with ceramic pistons. The compact Karcher HD 7/20 G Classic high-pressure cleaner without water heating is the ideal entry-level solution for those new to petrol-powered equipment. The unit is very easy to transport in a car and enables effective cleaning even for demanding tasks, for example on construction sites or in municipal services. The device offers an operating pressure of up to 200 bar and is equipped with a long-life crankshaft pump and a pump capacity of 700 litres per hour. User-friendly operation is ensured by an integrated petrol engine (EU STAGE V), enabling use without external power, inflatable wheels for easy mobility on-site, an ergonomic handle for transport, and practical accessory storage. All essential components are easily accessible for maintenance and effectively protected by thermostat and safety valves. The sturdy steel frame of the HD 7/20 G Classic also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Būklė: naujas, - User-friendly operating concept - Efficient design for economical and safe operation - Cooling fan with 0 - 100% variable speed control, eliminating the need for the usual pressure switch and thermostat for fan control - Fewer wear parts while maintaining a constant pressure dew point - Control system displays five different alarm conditions and stores them in memory - Refrigeration compressor switches off below 15°C ambient temperature if there is no compressed air flow - Clarity and good accessibility of all serviceable components - Equipped with built-in automatic condensate drain Key Advantages at a Glance - High cost-effectiveness - Excellent price-performance ratio - No unnecessary compressed air losses thanks to the integrated electronic condensate drain - Connected tools and machines are optimally protected Ihjdpfxeu T Hrvs Agfew - User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Airflow rate l/min: 1200 l/min - Airflow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and Weights: - Length (product) approx.: 325 mm - Width/Depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Weight (net) approx.: 24 kg