Terminalas pirkti naudotą (417)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Mažas skelbimas
Berkel en Rodenrijs
1 328 km
2008 Terberg Dalys terminaliniams traktoriams type rt 222 |Varikliai | automatines pavaru dezes|| pr
TerbergParts for terminal tractors type rt 222 |Engine...
Skambinti
Gamybos metai: 2008, Sąlyga: naudotas, Ano de fabricação: Fevereiro de 2008
Novo: Não
Lrodpfevz S Rljx Af Ijg
Número de série: vários
Temos alguns tratores terminais usados à venda que podem ser utilizados para peças. Os veículos estão em condições de funcionamento.
Aukcionas
Baigiasi po
d
h
min
s
Aukcionas pasibaigęs
Województwo wielkopolskie
506 km
Tarpinė
Christ Car Wash SystemsQuantus C 165
Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 00034717-00-0010-01, The original price of the system was 93,000 EUR!
Washing system with the following configuration:
Grey water recycling equipment (QU00370)
Articulated mechanism (QU01210), clearance height 2,250 mm
SENSOFIL + (QU01410), clearance height 2,250 mm
Splash guard roof roller (QU00142)
Wheel washing unit with brush & linear technology (QU00151)
Side high-pressure system (QU00152), 2 RD, 1 overflow: 20 l/min, 85 bar
Side high-pressure system (QU00169), 8 OD, 1 overflow: 40 l/min, 50 bar
Active foam system (QU01500)
Special wax application unit (QU01530)
Emergency stop device front left (QU00320)
Emergency stop device front right (QU00330)
Emergency stop device rear left (QU00340)
Emergency stop device rear right (QU00350)
Positioning device, LED, fixed, left (QU00388)
Positioning device, LED, fixed, right (QU00389)
Fresh water supply separation, pipe separator (EZ00000)
Energy chain (EZ00020)
Control terminal, VARIO-L, wall mounting (EZ02500)
Wheel guide rails (EZ00700)
Signs DIN A3
Documentation, PWA, standard, DE
VDA conformity certificate, PWA, DE
Basic chemistry set, PWA
Electrical data
Rated voltage: 400 V
Mains connection: 3/N/PE
Frequency: 50 Hz
Ledpfx Afox Rzw Eo Iorg
Power consumption: 19.0 kW
Rated current: 38 A
Mažas skelbimas
Częstochowa
579 km
Pakavimo mašina
PacksizeEM6-50MT
Skambinti
Sąlyga: labai geros būklės (naudotas), Modelis: EM6-50MT
Pagaminimo metai: 2008
Lsdpfx Afoxqm Nke Iorg
Serijos numeris: 58060
Matmenys: 600 x 300 x 550
Gofruoto kartono pjovimo mašina su pjaustymo ir vyniojimo įrankiais, išvyniotuvu, darbo stalu, valdymo spinta ir operatoriaus terminalu.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Częstochowa
579 km
Pramoniniai robotai
Universal RobotsUR10-CB3.1
Skambinti
Sąlyga: labai geros būklės (naudotas), Year of manufacture: 2018
Reach: 1300 mm
Payload: 10 kg
Lrodpfswtp Tmjx Af Ijg
Robot weight: 28.9 kg
Repeatability: ±0.1 mm
Gripper: Schunk RH 907
Force sensor joint: AXIA80-ZC22
Software for controlling the above-mentioned devices and cameras (cameras not included)
Control unit: handheld terminal + control cabinet
Table not included
Mažas skelbimas
Częstochowa
579 km
Įpurškimo liejimo mašina
ARBURGAllrounder 270-S-400-70
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamintojas: ARBURG
Modelis: Allrounder 270-S-400-70
Pagaminimo metai: 2010
Serijos numeris: 214269
Lodex Eirwspfx Af Isrg
Valdymo sistema:
Valdymo sistema: Arburg Selogica Direct
Operatoriaus pultas: operatoriaus terminalas
Valdymo spintos: pilnos valdymo ir maitinimo spintos
Uždarymo bloko parametrai:
Uždarymo jėga: 400 kN
Įpurškimo bloko parametrai:
Sraigtas skersmuo: 18 mm
Detalių paėmimo sistema (handling):
Gamintojas: ARBURG
Tipas: Multilift
Ašių skaičius: 3 ašių paėmimo robotas
Išlietų detalių transportas:
Ciklinis konvejeris – ilgis/plotis: 2 000 × 800 mm
Mažas skelbimas
Łaziska Górne
655 km
Transportinis traktorius
KalmarTR6181 4X4 - 1 OWNER
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2013, veikimo valandos: 11 200 h, keliamoji galia: 20 100 kg, kuro tipas: dyzelinas, variklių gamintojas: Sisu Diesel, pavaros tipas: automatinis, tuščias svoris: 11 360 kg, spalva: raudona, Įranga: apšvietimas, hidrauliškai stumdomas kabina, kabina, oro kondicionavimas, pilna techninės priežiūros istorija, priekabos jungtis, sėdynės šildytuvas, visų varančiųjų ratų pavara, For sale: Terminal tractor imported from Sweden, operated by its first and only owner on private premises for loading and unloading Ro-Ro ships.
Ledpfxoxq Avyj Af Ijrg
Regularly serviced, fully operational, and ready for immediate use.
The well-maintained cab offers multiple features for operator comfort, including heated driver’s seat, radio, air conditioning, and a swiveling seat.
Basic data:
Make / Model: Kalmar TR618i
Year of manufacture: 2013
Type: Terminal tractor / Ro-Ro (Roll-on/Roll-off)
Drive: 4×4
Condition: Very good, fully functional
Engine: Sisu Diesel 74 CTA
Engine power: 180 kW @ 2200 rpm
Torque: 987 Nm @ 1500 rpm
Transmission: Dana RTE 15822 – 8 forward / 8 reverse gears
Drivetrain: 4×4 (Sisu SSDP12S front / SRDP30S rear)
Fifth-wheel lifting capacity: 32,000 kg
Unladen weight: approx. 11,100 kg
Dimensions (L×W×H): 5350 × 2,500 × 3,140 mm
Equipment and technical condition:
Cab with full visibility, ROPS, air-suspended operator seat
Fully functional hydraulic system
Fifth wheel with ±10° tilt
Power steering, CAN-Bus system
Pneumatic braking system, twin-cylinder compressor
Tyres in good condition (315/80 R22.5)
Air conditioning, heating, radio, heated driver’s seat
Hydraulically tilting cab – easy service access
180-degree swiveling seat
Tractor saddle boom
Additional information:
Operated in a port terminal – used exclusively within closed premises
No leaks, no play in joints
Ready for pickup, on-site testing possible
Complete tractor documentation available
User manual and parts catalog on CD.
Listed price is net and applies to export and companies.
Attractive discount possible for private buyers –
Please contact us directly by phone to get your best offer :)
Mažas skelbimas
Tammiku
509 km
Sraigtinis siurblys
BornemannHC-232-100
Skambinti
Sąlyga: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 72588, darbinis slėgis: 4 juosta, Sraigtinis siurblys su BrookHansen 132 kW varikliu, tipas 7-ud315sn, Bornemann siurblys, tipas HC-232-100, 4,5 bar, 498-507 m3/h. Naudotas mazuto perpumpavimui kuro terminale. Papildomai prie šio variklio yra dažnio keitiklis. Visus turimus siurblius galite peržiūrėti kataloge.
Lrsdpevvlrrjfx Af Ijg
Mažas skelbimas
Bremen
1 009 km
8000 litrų izoliuota V2A talpa su šoniniu propeleriniu maišytuvu
9469
Skambinti
Sąlyga: naudotas, bakelio talpa: 8 000 l, GENERAL INFORMATION
Equipment: Spray head
Design: Upright/vertical
Remarks: Minor differences in execution between the two tanks (e.g., outlet positions); manway diameter approx. 510 mm; one former manway and 1 connection in the lower cylinder area have been welded shut by the previous operator; 1 tank has a small dent in the insulated jacket; see photos
Speed: 900 rpm
External diameter: 1,800 mm
Internal diameter: 1,690 mm
Overall height: 4,550 mm
Insulation: available
Power: 0.55 kW
Agitator: propeller
Location: Bremen
Volume: 8,000 liters
Product-contact material: V2A 1.4301 (AISI304)
Condition: used
Cylindrical height: 3,500 mm
Previous use: Dairy
TANK
Support type: Feet
Number of feet: 4 pieces
INSULATION
Ledeyckrhjpfx Af Isrg
Insulation jacket: hermetically welded
Insulation jacket material: Stainless steel
EQUIPMENT
Manhole / dome: on top head
Outlet: DN65 DIN 11851
MATERIAL DETAILS
Material of feet: Stainless steel
AGITATOR
Agitator manufacturer: Stelzer
Voltage: 220/380 Volt
Agitator position: side-mounted on cylinder
Agitator additional info: On one agitator, the propeller is missing and the motor terminal box is damaged (see photos)
Mažas skelbimas
Oldenburg
1 040 km
Nešantis įtvaras
Kalmar18000 kg Adjustable Coil Dorn
Skambinti
Gamybos metai: 2026, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 1 500 mm, keliamoji galia: 18 000 kg, Tragedorn
Ljdpfx Asycm Hbsf Ierg
Krovos centras: 1200
ISO klasė: Terminal West
Būklė: Kaip naujas
Techninė būklė: Nauja
Aprašymas: 254 mm skersmuo plieno ritinių tvarkymui
Mažas skelbimas
Oldenburg
1 040 km
Nešantis įtvaras
Kalmar18000 kg Coil Dorn
Skambinti
Gamybos metai: 2026, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 1 500 mm, keliamoji galia: 18 000 kg, Pakėlimo strypas
Krovos svorio centras: 1200
ISO klasė: Terminal West
Būklė: Kaip naujas
Lsdpfxoycm E Ro Af Isrg
Techninė būklė: Nauja
Aprašymas: 254 mm diametras plieno ritinių tvarkymui
Mažas skelbimas
Vokietija
780 km
Praeinės apdirbimo centras
WeekeOptimat BHX 500
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Weeke BHX 500 – Operator Side Right
Weeke machining center with one processing unit each on the top and bottom
Infeed table with automatic workpiece feeding and positioning
WORKPIECE DIMENSIONS
Min. workpiece length: 200 mm
Max. workpiece length: 2500 mm
Min. workpiece width: 70 mm
Max. workpiece width: 1000 mm
Min. workpiece thickness: 8 mm (2*4 mm)
Max. workpiece thickness: 80 mm
Maximum workpiece stacking: 2 pieces
Machine configuration:
2V21 HIGH SPEED 7500
Vertical drilling unit mounted on both the upper and lower processing supports, each with 21 drill spindles (individually controllable with variable speed range).
2H4X/1Y
Horizontal drilling unit mounted on both the upper and lower processing supports, each with 10 drill spindles individually selectable via program:
8 drill spindles in X direction per support
2 drill spindles in Y direction per support
N2 X-Y 90°
Ljdpfx Afsx S Hzlo Ierg
Grooving saw unit mounted on both the upper and lower processing supports for machining in the X-Y direction, swivels 90°.
Cutting depth: 30 mm
ADDITIONAL SPECIFICATIONS FOR GROOVING SAW BLADE
Saw blade width can be 8.4 mm.
The cutting cross-section must not exceed 70 mm².
F2-ETP-6 KW
Milling unit mounted on both the upper and lower processing supports, suitable for accepting shank tools.
Manual tool change.
Tool clamping: manual, ETP 25 hydro quick-clamping system
Rotation direction: right/left
Spindle speed: 6,000 – 18,000 rpm, infinitely programmable
Machining up to 3,000 mm
Infeed table with automatic workpiece feeding and positioning
Workpiece removal area with cross belt conveyor and pick-up arms
– Integrated workpiece length measurement in the machine
– Movable operator terminal
– Barcode software incl. scanner
Mažas skelbimas
Wiefelstede
1 046 km
Kiaulių skerdykla
Banss, Certus, Itecca. 200 Schweine / Std.
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2002, Pig slaughtering line, approx. 200 pigs/hour.
Location: 26215 Wiefelstede, Germany
The equipment is dismantled into individual parts.
- Comprising the following components:
1) 1x Rider seat retainer with automatic heart/brain stunning, manufacturer Banss, type LVR-8940L
2) 1x Bleeding plate conveyor, manufacturer Banss, type EFB
4) 1x Plate conveyor, type PB-1500
5) 2x Singeing/hygienic flame oven, manufacturer Banss, type BF2
6) 1x Dry whip machine, manufacturer Banss, type T3S
7) 1x Whip washing machine, manufacturer Banss, type AW
8) 1x Pre-wash machine, manufacturer Banss, type V3S
9) 1x Condensation scalding tunnel, manufacturer, type KBT-220
10) 1x Continuous dehairing machine, manufacturer Banss, type 300-2/1
11) 1x Lot of cables
12) 1x Bleeding & scalding tunnel conveyor
13) 1x White offal conveyor
14) 1x Red offal conveyor
15) 1x PLC control system, manufacturer Siemens, type S7-414-2DP
16) 1x Weighing rail conveyor, manufacturer Banss, type WSF560 Li
17) 1x Evaluation terminal, manufacturer Bizerba / Banss, type ST(SWE)
18) 1x Hanging rail scale, manufacturer Bizerba, type ST(NSW)
19) 1x Empty hook conveyor for plate conveyor, manufacturer Höcker
20) 1x Steam generator, manufacturer Certuss, type Universal 1300 Oil
Lredsh Db Hcopfx Af Ieg
21) 1x Intestinal content separator, manufacturer Itec, type 300
22) 1x Rotary lobe pump, manufacturer Itec/Vogelsang, type VX136/186Q
23) 1x Gut transport pump
24) 1x Taifun vacuum packaging transport system for raw meat, manufacturer MariMatic, type E0800-150-200FB
25) 1x Ejector, manufacturer MariMatic, type TF852
26) 1x Separator, manufacturer MariMatic, type 200 L
27) 6x Suction points with slide valve, manufacturer Stafsjö, type DN150
28) 1x Shaft cabinet, manufacturer MariMatic, type S5-200
29) 1x Auto marker, manufacturer Carometec Food Technology
30) 1x Lot of holding pens
31) 1x Lot of overhead tracks
32) 1x Lot of drawings, operating manuals, and circuit diagrams
34) 1x Supporting structure
Sale of individual components is possible—please inquire.
Mažas skelbimas
Friedrichsdorf
1 160 km
Dyzeliniai krautuvai
BobcatD 80 S - 9
Skambinti
Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, veikimo valandos: 20 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 4 800 mm, laisvas kėlimas: 1 570 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 780 mm, galia: 59 kW (80,22 AG), šakių laikiklio plotis: 2 240 mm, šakių ilgis: 2 400 mm, pavaros tipas: Diesel, Dyzelinis krautuvas
Kėlimo centro taškas: 600
Šakių plotis: 180 mm
Šakių storis: 75 mm
ISO klasė: Terminal West
Ljdpfxjxr R Efo Af Ierg
Stiebo tipas: Triplex
Pavarų dėžė: Hidrotransformatorius
Greičio klasė: 20
Būklė: Naujas įrenginys
Techninė būklė: Nauja
Priekinės padangos tipas: Superelastinės
Priekinės padangos būklė: Naujos
Galinės padangos tipas: Superelastinės
Galinės padangos būklė: Naujos
Šoninis poslinkis, šakių išskėtimo įrenginys, 3-iasis vožtuvas, 4-asis vožtuvas, galiniai ir priekiniai darbo žibintai, šildytuvas, pilna kabina, pilnas laisvas kėlimas, CE sertifikatas, vidinis veidrodis, išorinis veidrodis, signalinė švyturė, sėdynė, priekinė ir galinė kamera.
Mažas skelbimas
Topole
444 km
Sorteris OPTIMUS WS 45200
OPTIMUSWS 45200
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, For sale, we offer a used, double-sided Optimus sorting system. This is an Optisorter, model WS 45200.
The system is fully dismantled and prepared for transport.
Technical data:
Year of manufacture: 2011
Terminal board: 3F + N + PE
Control voltage: 24 VDC
Power supply: 400 V, 25 A (max.)
Product dimensions: min. 150x150x5 mm, weight 0.1 kg; max. 400x280x40 mm, weight 2 kg
Capacity: 4,500 containers per hour
Total length: 38 m
Width: 7 m
Number of infeed stations: 3 pcs.
Number of carriers: 114 pcs.
Lredpfsixl S Rox Af Iog
Total number of discharge points: 201, of which 120 on one side and 81 on the other
Number of motors: 2 pcs.
Machine location: 89-600 Chojnice, Poland
The machine is dismantled, stored dry and ready for dispatch.
If interested, please contact us.
Mažas skelbimas
Nattheim
1 177 km
Briaunų klijavimo staklės
HebrockAKV 3006 DK-F
Skambinti
Sąlyga: naudotas, Gamybos metai: 2016, AKV 3006 DK-F: 1 unit edge banding machine AKV 3005 DK-F with jointing/milling aggregate, including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station, radius R 2.5 mm.
Technical Description:
Lrsdoycuknopfx Af Ieg
- EVA hotmelt glue application for edge material up to 3 mm
- 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit
- Maintenance-free, coated glue pot
- HF end trim station (16,000 rpm) for front and rear edge overhang
- HF milling station (16,000 rpm) with interchangeable insert cutter (combo version) and fine cutter adjustment from operator side
- Free slots for additional processing units (Hebrock system)
- Feed rate approx. 10 m/min
- Adjustable cut depth for end trimming saw
- Signal lamp for workpiece sequence
- Robust chain feed system
- Ergonomically positioned control panel
- Double roller top pressure beam
- Viewing window for aggregates from the rear and operator side
- PLC control including touchscreen
Technical data:
- Feed speed: 10 m/min
- Panel thickness: 8 - 40 mm
- Weight: depending on configuration, approx. 1,550 kg
- Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm
Airtronic system including cooling and anti-static spray device, year 2014. 1 unit hot air aggregate for producing optical zero-joint when using specially designated edge materials. Includes:
- Pneumatic glue pot positioning
- Cooling and anti-static spray equipment
- 2 additional quick-change edge channels
- Special corner rounding milling unit for max. workpiece thickness 60 mm and min. length 200 mm (for Hebrock 3000 series edge banders only)
- Retrofits possible – extra costs upon request
Technical data for hot air unit:
- Max. panel thickness: 40 mm
- Edge thickness: 1.2 – 2.0 mm
- Feed speed: 7 – 10 m/min
- Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled
- Ready to operate in approx. 2 min
Special version minimum workpiece thickness 8 mm
1 unit Airtronic retrofit for PLC machines (on request)
1 unit retrofit only possible at the Hüllhorst – Oberbauerschaft factory
Upgrade to 8 mm edge thickness, 1 unit up to max. 40 mm workpiece thickness, including pneumatic saw adjustment
Special infeed fence for multi-layer/double-stacked panels, 1 unit for 16 mm and 19 mm thickness, max. top layer overhang 8 mm
Separate pneumatic milling cutter adjustment, 1 unit, operator control panel (straight/radius)
Buffing unit (polishing/swab), 1 unit
Corner rounding milling unit, 1 unit incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm
Ball bearing 24.1 mm for corner radius cutter, 1 unit
Ball bearing 24.2 mm for corner radius cutter, 1 unit
Corner rounding milling for 60 mm workpiece thickness, 1 unit
Quick-change device for corner mill, 1 unit
Exchange motor 0.37 kW for corner radius cutter, 1 unit including terminal box with attached electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or alternatively Siko counter; includes radius cutter R 1.0 mm, ball bearing 24.1 mm for corner cutter, 1 unit; ball bearing 24.2 mm for corner cutter, 1 unit
Radius scraper, 1 unit with pneumatic lift device, radius R 2.0 mm
Radius scraper, 1 unit with pneumatic lift device, radius R 1.0 mm
Flat scraper, 1 unit with pneumatic engagement control
Glue station quick-change system incl. glue discharge device downwards in preparation, 1 unit without 2
Aukcionas
Baigiasi po
d
h
min
s
Aukcionas pasibaigęs
Nordrhein-Westfalen
1 188 km
Bokštelinės perforavimo staklės
AMADAEMZ-3610 NTZ + LKI MP SheetCat 3015
Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2010, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 173, perforavimo jėga: 30 t, X ašies eiga: 2 500 mm, Y ašies eiga: 1 525 mm, X ašies padavimo greitis: 100 m/min, valdiklio modelis: AMNC-F (FANUC 180i-PB), No reserve price – guaranteed sale to the highest bidder!
Auction of an AMADA EMZ-3610 NTZ including LKI MP SheetCat 3015 manipulator!
Bidding obligates the buyer to collect the equipment on time between 23/03/2026 and 27/03/2026!
AMADA EMZ-3610 NTZ
TECHNICAL DETAILS
Punching force: 300 kN
Turret tool capacity: 45 stations
Maximum material size: 1,525 × 5,000 mm
Maximum material thickness (mild steel): 4.5 mm
Maximum sheet weight (F1): 50 kg
Maximum sheet weight (F4): 150 kg
X-axis travel: 2,500 mm
Y-axis travel: 1,525 mm
Feed rate
X-axis: max. 100 m/min
Y-axis: max. 80 m/min
Strokes per minute
1 mm pitch (5 mm stroke): 780 rpm
25.4 mm pitch (5 mm stroke, X-axis): 500 rpm
25.4 mm pitch (5 mm stroke, Y-axis): 330 rpm
Max. stroke length: 37 mm
Turret rotation speed: 30 rpm
Positioning accuracy: 0.07 mm
MACHINE DETAILS
Electrical connection power: 27 kVA
Ljdpfx Ajycqm Sjf Ierg
Compressed air requirements
Base machine functions & air blow: 250 l/min
POWER VACUUM (EMK) / AIR JET VACUUM (EMZ): 250 l/min
Operating pressure: 5 bar
Control
Control system: AMNC-F (FANUC 180i-PB)
Controlled axes: 4 axes (X, Y, T, C) + A-axis
Programming: metric or inch
Dimensions & Weight
Approx. dimensions (L x W x H): 5,422 x 5,120 x 3,241 mm
Height without leveling wedges: 2,317 mm
Height with mirror: 3,241 mm
Machine weight: approx. 24.5 t
LKI MP SheetCat 3015
TECHNICAL DETAILS
Max. sheet size: 3,050 × 1,525 mm
Min. sheet size: 1,000 × 300 mm
Sheet thickness: 0.5–6.0 mm
Max. sheet weight: 300 kg
Max. load per pallet: 3,000 kg
Max. pallet stack height: 300 mm
Max. stack table load: 4,000 kg
Cycle time (continuous operation): approx. 37 s
Max. movement speed, loading unit: 60 m/min
Max. movement speed, unloading unit: 30 m/min
MACHINE DETAILS
PLC: Mitsubishi Q-Series
Operator terminal: Beijers E1032
Dimensions & Weight
Approx. dimensions: 5,775 x 3,775 x 3,100 mm
Approx. weight: 4,100 kg
Max. compressed air requirement: 750 l/min
EQUIPMENT
2x chip bins, Bauer EXPO 150, year: 2023
34 vacuum suction pads
3 separation magnets/pallets
Double sheet detection with thickness monitoring
Note: The control parameters are missing.
Mažas skelbimas
Oldenburg
1 040 km
20/40' hidraulinis barstytuvas
ElmeSvetruck hydr. Spreader 20/40 568
Skambinti
Gamybos metai: 2004, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 3 900 kg, keliamoji galia: 10 000 kg, 20/40' hidraulinis skirstytuvas
ISO klasė: Terminal West
Techninė būklė: gera
Aprašymas: Twistlock skirstytuvas, Terminal West
Ledpfx Ajx U Hh Rof Ierg
Twistlock skirstytuvas, Terminal West
Mažas skelbimas
Nattheim
1 177 km
CNC apdirbimo centras
MorbidelliUniversal 3615 TV
Skambinti
Sąlyga: naudotas, Gamybos metai: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Traverse length X-Y: 4,200 x 2,000 mm Description of units and accessories (basic version) The main body structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed by welded-in triangular plates, providing exceptional stability. The use of triangles—with a wide base—for all load-bearing components ensures lasting precision and stability. The machine layout allows for optimal workflow with minimal space requirements. This construction provides the processing unit with a balanced and secure foundation, ensuring superior load distribution. The mobile unit carrier, designed as a gantry, is constructed as a solid monoblock. It is moved in the X-direction along precision-ground prismatic guides via recirculating ball carriages. The working unit is also mounted onto this mobile carrier using precision-ground prismatic guides and recirculating ball carriages. Axis movement: The Y and Z axes are driven by precision-ground recirculating ball screws of the highest accuracy class. The X axis drive employs a backlash-free preloaded precision rack-and-pinion system, ensuring balanced load distribution during positioning—critical for smooth movements, even in complex operations. The axes are driven by brushless AC servomotors. These provide excellent positioning speeds due to very low acceleration/deceleration times. Furthermore, these motors include fully integrated measurement systems, making this drive system entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (base version) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Base NC control: ESA-GV KVARA 6.0 · Cable remote control with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a high-performance NC controller. The integrated office PC provides the CNC with an unmatched degree of user-friendliness: the software operates on Windows XP and allows for swift and straightforward programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drive, sound card, barcode scanner, modem, printer, scanning systems, etc. Additionally, the installation of all standard network systems as well as all off-the-shelf CAD programs is possible. To save space, the control cabinet is placed beneath the machine table, and the operator works at a separate, mobile terminal that can be positioned freely. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in operator's native language (available for I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral on the selected plane - supported programming - Calculator for direct transfer of computed data - Graphic and syntax helpers for drilling and milling operations - Parametric programming, to perform identical panel machining on different p
Lrodpfx Aovvi Nzef Ijg
Mažas skelbimas
Nattheim
1 177 km
CNC apdirbimo centras
MorbidelliUniversal 3615 TV 4-Achs
Skambinti
Sąlyga: naudotas, Gamybos metai: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The structure of the machine base is a monolithic construction made of thick-walled steel. It is reinforced through the entire machine bed with welded triangular plates, providing exceptionally high stability. The triangular shape with a wide base used for supporting parts is the key to ensuring long-lasting precision and stability. The design of the machine allows the user to maintain an optimal workflow, even with minimal space requirements. This machine base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile unit carrier, designed as a gantry, is constructed as a solid monoblock. It is positioned in the X-direction on prismatically ground rails using recirculating ball carriages. The machining unit is again mounted on the mobile carrier on prismatically ground rails and recirculating ball carriage. Axis movement: The drive system in the Y and Z axes is via ground recirculating ball screws of the highest precision class. The drive in the X axis is via a backlash-free, preloaded precision rack-and-pinion drive. This ensures balanced load distribution during the positioning process. Such a characteristic is crucial to ensure smooth movement, even during more complex operations. The movement of the various axes is achieved by brushless AC servomotors. These provide excellent positioning speeds due to very short ramp-up times. Additionally, the measurement systems are fully integrated into these motors. These features make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (Basic) · Vacuum pump: 100 m³/h · Power: 2.5 kW · Max. vacuum (connection) 0.9 bar Control / Control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control system with an unparalleled level of user familiarity: the software runs on Windows XP, allowing fast and easy programming that can be learned quickly, even by inexperienced users. The system is open and allows the connection of a CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Furthermore, installation of all commercially available network systems as well as any CAD programs available on the market is possible. To save space, the control cabinet is placed under the machine table, and the operator works at a separate wheeled terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the chosen plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax help for drilling and milling operations - Parametric programming to perform the same panel machining on different
Lredpevvi Rfofx Af Iog
Mažas skelbimas
Oldenburg
1 040 km
Dyzelinis sunkiasvoris krautuvas
KalmarDCE160-12
Skambinti
Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: T331051593, Gamybos metai: 2006, veikimo valandos: 5 323 h, keliamoji galia: 16 000 kg, kėlimo aukštis: 3 980 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 920 mm, galia: 147 kW (199,86 AG), šakių laikiklio plotis: 2 950 mm, šakių ilgis: 2 400 mm, tuščias svoris: 24 300 kg, pavaros tipas: Diesel, statybos plotis: 2 950 mm, Sunkiasvoris dyzelinis šakinis krautuvas
Važiuoklės numeris: T331051593
Krovinio svorio centras: 1200
Šakių plotis: 250 mm
Lrsdpfx Ajxpy Rrsf Ijg
Šakių storis: 100 mm
ISO klasė: Terminal West
Stiebo tipas: Standartinis
Pavarų dėžė: Dana Clark 342TE13310-20
Būsena: Paruoštas naudojimui ir visiškai funkcionalus
Techninė būsena: gera
Priekinės padangos tipas: orinės
Priekinės padangos dydis: 12.00-20
Priekinės padangos būklė: 40 - 60%
Galinės padangos tipas: orinės
Galinės padangos dydis: 12.00-20
Galinės padangos būklė: 20 - 40%
Aprašymas: 2.950 mm pločio šakių laikiklis
Šoninis poslinkis, šakių išskėtimo įtaisas,
3-iasis vožtuvas, 4-iasis vožtuvas, priekiniai darbo žibintai, šildymas, pilna kabina.
Mažas skelbimas
Oldenburg
1 040 km
Dyzelinis sunkiasvoris krautuvas
HysterH30XMS-9
Skambinti
Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H008E03536T, Gamybos metai: 2019, veikimo valandos: 9 800 h, keliamoji galia: 30 000 kg, kėlimo aukštis: 4 000 mm, laisvas kėlimas: 1 870 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 3 900 mm, galia: 194 kW (263,77 AG), šakių ilgis: 2 440 mm, tuščias svoris: 44 280 kg, pavaros tipas: Diesel, Heavy-Duty Forklift - Diesel
Chassis Number: H008E03536T
Load Center: 900 mm
Fork Width: 300 mm
Fork Thickness: 105 mm
Mast Type: Duplex
Transmission: ZF WG211
Condition: Ready for operation and fully functional
Technical Condition: Good
Ljdpfxjxzv Hts Af Isrg
Front Tires Type: Pneumatic
Front Tires Size: 16.00-25
Front Tires Condition: 20 - 40%
Rear Tires Type: Pneumatic
Rear Tires Size: 16.00-25
Rear Tires Condition: 60 - 80%
Description: In addition to this MAKE - MODEL, we have approximately 150 more heavy-duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase & financing under fair conditions are always available from us. We are also happy to buy your used equipment outright, even without a purchase from our side. Feel free to call me, Marco Levermann, I will be happy to provide you with detailed information on this MAKE - MODEL. By the way: Our specialist forklift workshop is geared towards the repair and servicing of large equipment from 8 tons and up. We can also offer your vehicle for consignment sale at our premises.
Side shifter, fork positioner,
Full cab, air conditioning,
electric cabin lifting
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Oldenburg
1 040 km
Dyzelinis sunkiasvoris krautuvas
SMVSMV16-1200C
Skambinti
Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M12094*18976, Gamybos metai: 2019, veikimo valandos: 6 000 h, keliamoji galia: 16 000 kg, kėlimo aukštis: 4 000 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 650 mm, šakių ilgis: 2 400 mm, tuščias svoris: 23 500 kg, bendras ilgis: 5 200 mm, pavaros tipas: Diesel, statybos plotis: 2 550 mm, Heavy-duty forklift - diesel
Chassis number: M12094*18976
Load center: 1200 mm
Fork width: 200 mm
Fork thickness: 100 mm
Mast type: Standard
Condition: Ready for operation and fully functional
Technical condition: Good
Description: In addition to this MAKE - MODEL, we have around 150 other heavy-duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing on fair terms can be arranged at any time. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Please call me, Marco Levermann – I will be happy to provide a detailed consultation regarding this MAKE - MODEL. By the way: Our specialist forklift workshop is focused on repair and servicing of large machines from 8 tons upwards. We can also list your vehicle for consignment sale at our facility.
Side shifter, fork positioner,
Lredpfx Afox Twpce Iog
3rd valve, 4th valve, rear work light, front work light, heater, full cabin,
Mažas skelbimas
Wiefelstede
1 046 km
Autobuso adapteris
SiemensSimatic ET 200SP 6ES7193-6AR00-0AA0
Skambinti
Sąlyga: geras (naudotas), PLC valdymas, prisijungimo modulis skaitmeniniams elektronikos moduliams, terminalo modulis, magistralės adapteris
Ledox Tznpspfx Af Iorg
-Gamintojas: Siemens, magistralės adapteris Simatic ET 200SP
-Tipas: 6ES7193-6AR00-0AA0 6ES7 193-6AR00-0AA0
-Kiekis: yra 4 moduliai
-Kaina: už vienetą
-Matmenys: 70/60/H20 mm
-Svoris: 0,1 kg/vnt.
Mažas skelbimas
Vokietija
1 017 km
Pramoniniai robotai
Cloos2 Qirox Roboter auf Bodenfahrbahn
Skambinti
Sąlyga: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, System consisting of:
1 Qirox QRC 350-E welding robot incl. QC2 advanced controller, 1 Qirox QRC 410-E welding robot incl. QC2 advanced controller, programming hand-held terminal with 25 m cable, 24 V buffering, 2 GB flash drive
Software extensions per robot:
Gas nozzle sensor, arc seam tracking, multilayer welding technology, point editor, transformation, 15" TFT with touch panel at cabinet, master-slave configuration for robots 1 and 2, RSM software for remote maintenance
2 ICSE LD offline lasers
Robot 1 welding equipment single-wire tandem with automatic torch change system:
2 Qineo Puls 600 (600A) with master operating module, 3 wire feeders, 3 torch hose packages, MRW 510 evo single welding torch, Duo drive CDD 2, single torch gauge as well as with CDD, mechanical single-wire cleaning with external cleaning, pressure booster, 1 ZMW 850 evo tandem torch, Duo drive tandem CDD-T, single torch gauge as well as with CDD, mechanical tandem cleaning with external cleaning
Floor rail system 50 kN, travel path 26 m, 1 C-frame with lifting carriage, travel path 1.5 m for robot 1, 1 fixed C-frame for robot 2
2 WPST-30 kN turning devices, electric shaft, synchronous drive, designed as rhön wheels for holding hall girders (size min. 70x180 and max. 400x900 mm, loading capacity 4,000 kg, on motorized transfer track, max. clamping length approx. 19 m)
1 L-manipulator WPS-TS 20 kN, rotation radius 2,750 mm
Interlocking control, 2 light curtains for floor rail safety, 2 pre-selection start switches, partitions and sliding doors incl. limit switch safety, 2 bumpers for floor rail safety of both trolleys, signal light for system status.
Ljdewgd Hzspfx Af Iorg
Both robots can weld on the hall girders, and robot 2 can also weld on the L-manipulator.
1 Tecau 6000 filter unit with 6,000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction channel
Delivery time: available immediately. Delivery date by arrangement. Inspection possible under power.
Mažas skelbimas
Ennepetal
1 178 km
Elektronika / PLC valdymas
HEIDENHAINUV 105
Skambinti
Sąlyga: labai geros būklės (naudotas), Connection via terminals for up to 20A
with matching cover for ribbon cable
Module width: 50 mm
Supply voltage: 400V~ +/-10%
385V to 750V-
This UV 105 can be used with both Heidenhain and Siemens inverter systems.
Ljdpfoud Ilrsx Af Ijrg
All technical specifications are provided without guarantee.
Palengviname jums paiešką: "terminalas"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Terminalas (417)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo










































































































































































































































































































