Suvirinimo Kabelis pirkti naudotą (3 707)

Sąlyga: geras (naudotas), Earth cable for MIG/MAG welding machine, electrode welding unit, stud welding device Nkjdpfxoutuv Rs Agiju -Welding cable: Extension / connection lead -Length: 10.0 m -Connector: 14/8-pin, see photos -Cable coupling: DIX SK 70 -Transport dimensions: 460/450/H80 mm -Weight: 9.2 kg

Sąlyga: geras (naudotas), Mass cable for shielding gas welding machine, electrode welder, stud welding unit Nedpfx Agjlbdlpeisku -Welding cable: Extension / connection cable for stud welding unit -Length: 25 m -Cross-section: 1x50 mm² -Transport dimensions: 570/480/H130 mm -Weight: 17.8 kg

Sąlyga: naudotas, Mass cable for shielding gas unit, electrode welding machine, stud welding machine -Welding cable: extension / connection lead for stud welding unit Nkodpfjkx Srxex Agiou -Length: 24 m -Connector: 4-pin -Transport dimensions: 600/600/H100 mm -Weight: 18 kg

Sąlyga: naudotas, Ground cable for shielding gas welding machine, electrode welding machine, stud welding machine, MIG/MAG hose package Njdpfxskx Sr Rj Agioku -Welding cable: MIG/MAG hose package extension -Length: 30 m -Connector: 10-pin -Gas hose -Cooling water hoses -Transport dimensions: 760 x 760 x H400 mm -Weight: 47 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 90 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras aukštis: 1 100 mm, bendras plotis: 500 mm, bendras ilgis: 1 200 mm, Orbital-Schweißung von Rohren vor Ort (mit oder ohne Oszillation, je nach Rohrwandstärke) inklusive Montage! Rohrdurchmesser: 25–115 mm Wandstärke: 1–8 mm Nkedpfx Agev Di S Ejisu Im Lieferumfang enthalten: Rohrschneider, Schweißarm, Fernbedienung, Ausrüstung mit Kühlsystem – alles wie abgebildet. Abmessungen (L x B x H): 1200 × 500 × 1100 mm

Sąlyga: naudotas, Gamybos metai: 2009, siurbimo galia: 16 000 m³/val, neigiamas slėgis: 2 500 Pa, Dust extraction unit, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-operated, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Nsdpfxjrk Itce Agioku The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Fan power: 15 kW Capacity: 16,000 m³/h Vacuum: 2,500 Pa Filter cartridges: 13 pcs. Filtration surface: 260 m² Inlet diameter: 2 x 560 mm Year of manufacture: 2009 Device dimensions: Height: 2.70 m Width: 5.70 m x 1.85 m Weight: 2,600 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, negative pressure unit suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned by pulses of compressed air during operation, ensuring high device efficiency. The unit is equipped with a pre-separator and a mechanical spark arrester. The fan is positioned on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of manufacture: 2012 Filtration cartridges: Donaldson Torit Ultra WEB – 12 pcs Filtration surface area: 215 m² Fan power: 18.5 kW Njdpfx Aeiypxiogioku Capacity: 11,000 m³/h Negative pressure: 3,900 Pa Inlet diameter: 500 mm New filtration cartridges tailored to the device’s application are also available on request. Dimensions: height: 5.00 m length: 3.50 m width: 1.70 m weight: 2,200 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Beveik nauja mašina iš įmonės likvidacijos Nkjdsyl R U Iopfx Agisu

Sąlyga: naudotas, Gamybos metai: 2008, įvesties srovės tipas: trifazis, filtravimo plotas: 10 m², siurbimo galia: 1 000 m³/val, neigiamas slėgis: 3 000 Pa, rankos pasiekiamumas: 3 000 mm, Mobilus suvirinimo dūmų nutraukėjas, dulkių ištraukėjas, savaime išsivalantis, pneumatinis, vakuuminis KEMPER filtras. Skirtas suvirinimui, šlifavimui ir visų rūšių sausoms dulkėms. Filtras išsivalo pneumatiškai, suspaustų orų impulsais darbo metu, kas užtikrina aukštą įrenginio efektyvumą. Modelis: Filter-master XL Ventiliatoriaus galia 1,5 kW. Našumas: 1000 m3/h Nkedpfxoymkq Se Agiou Vakuumas: 3000 Pa Kasetės tipo filtras. Sandėlio nr. - 1110

Sąlyga: labai geros būklės (naudotas), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed per unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight approx. 130 kg Nedpfx Aov Nrfxegieku SMC Technology - Smart Machine Control A unique step-switch device regulation concept developed by Rehm: Arc length is regulated not only through measurement of voltage and current, but also digitally via wire feed speed setting. This enables exceptional welding results and ensures operation is easy and safe. - SDI – Stepless Dynamic Induction A steplessly adjustable coil automatically ensures excellent arc strike characteristics and high arc stability during welding. Fine adjustment can be made manually using the SDI knob. This enables control over heat input, which can reduce required post-weld finishing work. - RSC – Realtime Speer Control Digital monitoring and regulation of wire feed speed with high precision in real time. Thanks to RSC, fluctuations in arc length are compensated more quickly and effectively. - CCM – Characteristic Curie Memory The device features an integrated welding parameter database, containing expert knowledge. By selecting the wire type, diameter, and welding voltage, pre-set synergic welding parameters are automatically chosen. During welding, actual parameter values are compared with set values and corrected instantly if necessary. - RMI – Rehm Machine Interface The control panel is extremely user-friendly, minimizing the risk of incorrect selection. Simple parameter selection streamlines the welder's work, reduces errors, and minimizes device setup time.

Sąlyga: beveik kaip naujas (naudotas), Hersteller: Merkle (Deutschland) Modell: mobiarc 284 Technologie: IGBT-Inverter Schweißverfahren: MMA (Elektrode), TIG DC (Lift-Arc) Eingangsspannung: 400 V, 3-phasig, 50/60 Hz Produktbeschreibung Die Merkle mobiarc 284 ist eine moderne, tragbare Inverter-Stromquelle für professionelle Schweißarbeiten in Werkstätten, auf Baustellen, bei Montageunternehmen sowie in der industriellen Instandhaltung. Dank kompakter Bauweise und einem geringen Gewicht von nur 19 kg ist das Gerät äußerst mobil und ideal für Schweißarbeiten vor Ort und in beengten Arbeitsbereichen. Das Gerät bietet ausgezeichnete Schweißeigenschaften, eine stufenlose Stromregelung und fortschrittliche Lichtbogenregelungsfunktionen. Die mobiarc 284 ist für Arbeiten in engen Bereichen freigegeben und mit dem Sicherheitszeichen “S” gekennzeichnet, wodurch sie für anspruchsvolle und sicherheitskritische Einsätze geeignet ist. Hauptmerkmale • Fortschrittliche IGBT-Inverter-Technologie – effizient, kompakt und zuverlässig • Stufenlose Einstellung des Schweißstroms – präzise Regelung für hochwertige Nähte • Digitalanzeige – übersichtliche Darstellung aller Schweißparameter • Fernregelungsbuchse – 10-poliger Anschluss mit Polarisationsumschaltung • MMA-Schweißen mit Zelluloseelektroden – stabiler Lichtbogen, für Fallnaht geeignet • TIG-DC-Schweißen (Lift-Arc) – TIG-Schweißen ohne Hochfrequenz-Zündung • Geprüft für beengte Räume (S-Zeichen) – sicheres Arbeiten in engen Bereichen • Leichtes und tragbares Design – ideal für Montage- und Reparatureinsätze vor Ort MMA(Elektrodenschweißen) Die mobiarc 284 ist ausgelegt für das Verschweißen aller gängigen Stabelektroden im Durchmesserbereich von 1,6 bis 6,0 mm. Besondere Funktionen sind: • Lichtbogenregelung (Arc-Force): Automatische Stromerhöhung zur Vermeidung von Elektrodenklebungen • Hot-Start: Einstellbarer Anfangsstrom und -zeit für sichere Zündung • Anti-Stick: Sofortige Stromabsenkung bei Kleben der Elektrode, einfaches Wiederzünden • Exzellente Ergebnisse mit Zelluloseelektroden TIG-Schweißen (DC, Lift-Arc) Die Stromquelle ist ebenfalls bestens geeignet für das Gleichstrom-TIG-Schweißen mit Drahtelektrode und Lift-Arc-Zündung. Ein separates WIG-Brenner-Set mit Gasventil, Druckminderer und Schutzgasflasche wird benötigt. Einsatzgebiete • Reparatur und Instandhaltung • Hoch- und Tiefbau • Reparatur landwirtschaftlicher Geräte • Montage- und Installationsbetriebe • Industrie- und allgemeiner Stahlbau Geeignete Werkstoffe Njdpsyhddujfx Agioku • Legierter und unlegierter Stahl • Edelstahl • Gusseisen Technische Daten • Netzspannung: 400 V, 3-phasig, 50/60 Hz • Schweißstrombereich: 15 – 280 A • Schweißspannungsbereich: 20,6 – 31,2 V • Einschaltdauer (ED) bei 40°C (10 min): o 35% – 250 A o 50% – 250 A o 60% – 240 A o 100% – 210 A • Leerlaufspannung: 90 V • Stromaufnahme (MMA / TIG): 14 A / 12 A • Leistungsaufnahme (MMA / TIG): 9,7 kVA / 8,3 kVA • Maximaler Eingangsstrom (MMA / TIG): 21 A / 16 A • Elektroden-Durchmesser: 1,5 – 6,0 mm • Leistungsfaktor: 0,98 cosφ • Schutzart: IP23 • Isolationsklasse: H • Fernbedienungsschnittstelle: 10-polig mit Polumschalter • Anschlussbuchse: 50 mm² • Normen: EN 60974-1, CE, S-Kennzeichnung • Abmessungen (L × B × H): 495 × 210 × 450 mm • Gewicht: 19,0 kg

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: Merkle (Vokietija) Modelis: LiteTIG 300 AC/DC Technologija: IGBT keitiklis (inverteris) Suvirinimo procesai: TIG AC/DC, TIG DC pulsas, MMA (lankinis su elektrodu) Maitinimo įtampa: 400 V, 3 fazės, 50/60 Hz Produkto aprašymas Merkle LiteTIG 300 AC/DC yra kompaktiškas, aukštos klasės profesionalus TIG suvirinimo šaltinis, sukurtas remiantis modernia inverterine technologija, užtikrinančia puikias lanko savybes ir išskirtinį funkcionalumą. Įrenginys palaiko tiek AC, tiek DC suvirinimą, todėl puikiai tinka aliuminio, plieno, nerūdijančio plieno bei įvairių spalvotųjų metalų suvirinimui. Skirtas profesionalams, LiteTIG 300 AC/DC derina paprastą valdymą priekinėje panelėje su galingu Expert režimu, leidžiančiu patyrusiems suvirintojams maksimaliai tiksliai reguliuoti visus parametrus dėl aukščiausios kokybės suvirinimo siūlių. Valdymas ir naudotojo sąsaja • Skaitmeninis ekranas (standartas) – aiškus srovės, laiko, dažnio ir parametrų stebėjimas • Standartinis ir Expert režimai – programuojami įvairiems naudotojų lygiams • Daugiakalbis meniu • Valdymo panelės užraktas su PIN kodu • Rotacinis valdymo ratukas – spartus ir intuityvus parametrų reguliavimas • Atminties funkcijos – galima išsaugoti ir iškviesti iki 28 pilnų suvirinimo programų Pažangi TIG technologija • TIG AC/DC suvirinimas – tinka aliuminiui, magneziui, variniui ir kitiems spalvotiesiems metalams • HF ir Lift-Arc uždegimas – švarus bei patikimas lanko uždegimas • Aukšto dažnio DC pulsas iki 12 kHz – užtikrina itin siaurą ir fokusiruotą lanką maksimaliai kontrolei ir mažesnei šilumos įnešai • AC dažnio valdymas (50–200 Hz) – reguliuojama lanko forma bei įsiskverbimas • AC balansavimas – optimalus oksido nuvalymas ir įsiskverbimo paskirstymas • Reguliuojamos AC bangos formos – kvadratinė, minkšta, sinusinė • Pulsavimo režimai: lėtas, greitas ir aukšto dažnio pulsas • Taškinio suvirinimo funkcija – reguliuojama nuo 0,01 iki 2,5 s ____ MMA (lankinis suvirinimas su padengtomis elektrodais) LiteTIG 300 AC/DC taip pat palaiko MMA suvirinimą su elektrodais nuo 1,6 iki 4,0 mm (elektrodų laikiklis reikalingas, jei nepridedamas): • Hot Start – reguliuojamas patikimam lanko uždegimui • Arc Force – apsauga nuo elektrodo prikibimo • Anti-Stick – automatinis srovės atjungimas prikibus elektrodui Papildomos funkcijos • Dvi suvirinimo srovės (I1 / I2) – perjungiamos per Merkle TIG degiklį • 2T / 4T darbo režimai • Palaikomas pedalinis valdymas • Temperatūrinis aušinimo ventiliatorius • Degiklių aušinimas oru arba vandeniu • Tinkama naudoti uždaroje erdvėje ("S" žymėjimas) • Galimas papildomas vandens aušinimo blokas Pritaikymas • Profesionalus TIG suvirinimas • Pramoninė gamyba ir metalų apdirbimas • Techninė priežiūra ir remonto darbai • Auto ir motociklų remontas • Plonų medžiagų precizinis suvirinimas Techninės specifikacijos • Maitinimo įtampa: 400 V, 3 fazės, 50/60 Hz • Išėjimo srovės intervalas: 5 – 300 A • Išėjimo įtampa (TIG / MMA): 10 – 22 V / 20 – 32 V • Darbo ciklas esant 40 °C (10 min): o 50% – 300 A (TIG) o 60% – 280 A (TIG) / 270 A (MMA) o 100% – 250 A (TIG) / 230 A (MMA) • TIG DC pulso dažnis: 0,2 Hz – 12 kHz • Tuščios eigos įtampa: 70 V • AC dažnis: 50 – 200 Hz Njdpfx Aeyhdbaegisku • AC bangos formos: kvadratinė, minkšta, sinusinė • Elektrodo diametras (MMA): 1,5 – 4,0 mm • Galios faktorius: 0,95 cosφ • Apsaugos klasė: IP23 • Izoliacijos klasė: H • Degiklio jungtis: Merkle TCG, 5 kontaktai • Maitinimo jungtis: 50 mm² • Aušinimas: oru arba vandeniu • Matmenys (I × P × A): 600 ×

Sąlyga: naudotas, Gamybos metai: 2005, įvesties srovės tipas: trifazis, filtravimo plotas: 286,8 m², siurbimo galia: 12 000 m³/val, Dulkių nutraukėjas, suvirinimo dūmų ištraukiklis, savaime išsivalantis, pneumatinis, vakuuminis filtras nenutrūkstamam darbui, žinomo prekės ženklo Donaldson Torit. Tinka naudojimui su plazma, lazeriu, smėliavimu, sodos srove, suvirinimu ir visų rūšių sausoms dulkėms. Ventiliatorius įrengtas už filtro, švarioje pusėje, todėl sprogimo rizika sumažinama iki minimumo. Ultra Web filtro kasečių valymas atliekamas pneumatiškai suspausto oro impulsais darbo metu, todėl įrenginys pasižymi dideliu efektyvumu. Ventiliatorius: 15 kW Našumas: 12 000 m3/h Nkjdpfx Agjxxkzmeiju Antgalio diametras: 315 mm Filtravimo kasečių kiekis: 12 vnt. Filtravimo plotas: 286,8 m2 Pagaminimo metai: 2005 Įrengtas kibirkšties gaudytuvas „SparkTrap“ Sandėlio numeris: 1044

Sąlyga: labai geros būklės (naudotas), For sale: TIG welder, L-TEC 200 DC, in very good condition. Price is per unit. Nsdpfx Aeud R T Ssgisku

Sąlyga: labai geros būklės (naudotas), Simultaneous welding and plasma cutting capability. Output power: at 60% duty cycle 400A/36V, at 100% duty cycle 310A/32V. Nkodpfxeud Rl Uj Agisu

Sąlyga: labai geros būklės (naudotas), Parduodu naudotą Klauke K18 presą. Profesionalus mechaninis presas ENERGOTYTAN KLAUKE K18 sukurtas sunkiausiems elektros instaliacijos darbams. Stabili konstrukcija, tinkama naudoti tiek viduje, tiek lauke, užtikrina patikimą darbą Nsdpfx Agow Slkdoijku

Sąlyga: labai geros būklės (naudotas), For sale: Rowatec Genesis 160 welding machine. Nkedpfxovzb Tve Agisu

Sąlyga: labai geros būklės (naudotas), For sale: Esab LTG150 welding machine in very good condition. Nkedpou Sun Esfx Agisu

Sąlyga: labai geros būklės (naudotas), Rowatec MM 33 - Transformer welding machine - Heavy-copper transformer - Power rating: 330A at 60% duty cycle, 250A at 100% duty cycle Njdpfx Agjuyg Imeijku - Voltage range: 15.8V–33V - Circuit protection: 22A, 400V - Stepwise voltage adjustment (10 fine positions, 2 coarse positions) - Stepless wire feed speed control - 4-roll wire feeder - Welding modes: 2-stroke, 2-stroke spot, 2-stroke timed, 4-stroke, 4-stroke spot, 4-stroke timed - Stepless adjustment of pause duration and welding duration - Adjustable post-weld wire burnback time

Sąlyga: naujas, Gamybos metai: 2026, Main features, functions, and advantages of the welding positioner include: Functions: 1. Rotation direction switch-off: Enables control of the direction of the turntable's rotation. 2. Rotation direction selector switch: Allows changing the turntable's rotation direction. 3. Stepless adjustment of turntable rotation speed: This function allows you to set the rotation speed to match specific operational requirements. 4. Compact, robust design: The solid construction ensures the device's durability and resilience. 5. Foot pedal control: Facilitates precise operation of the positioner. 6. Thermal fuse: Provides additional operational safety. 7. Brushed motor: The brushed DC motor is suitable for a wide range of applications. 8. Tilt range of the turntable 0 - 90°: The turntable can be tilted from 0 to 90 degrees, which is essential for welding in various positions. 9. Mounting option for centering chuck: Allows for additional alignment of components. Advantages: 1. Increased work efficiency: The positioner enhances productivity in assembly and welding processes. 2. Reduced production costs: Automating or simplifying the rotation process helps lower production expenses. 3. Repeatability of welds: The device ensures consistent quality and accuracy for welds. 4. Operational flexibility: Adjustable speed and rotation direction make the positioner adaptable to diverse tasks. 5. Improved welder working conditions: Enables the welder to work more comfortably and adopt ergonomic positions during welding. Set includes: Nodporigmgofx Agisku 1. PS-500 positioner unit. 2. Foot pedal control. 3. Power cable. 4. User manual. 5. Welding torch holder mast. The CORMAK PS-500 positioner is a valuable tool for industries requiring the rotation and positioning of workpieces, especially during welding processes. It helps increase workflow efficiency, reduce production costs, and improve overall work quality. Technical specifications: - Maximum load: 300 kg - Table diameter: φ500 mm - Tilt angle: 0° ~ +90° - Rotation speed: 0.2 ~ 2.5 rpm - Drive power: 200 W - Tilt adjustment: manual - Voltage: 220V-1PH-50HZ - Torch support: included - Dimensions: 700 x 650 x 710 mm - Weight: 97 kg *3-jaw chuck is not included in the set

Sąlyga: naujas, Gamybos metai: 2026, Functions: 1. Rotation direction switch: This switch allows the operator to control the direction of the turntable’s rotation, which is crucial for precision welding tasks. 2. Rotation direction control switch: With this control, the operator can easily change the rotation direction of the turntable, enabling flexible adaptation of the device to various tasks. 3. Stepless speed control of the turntable: Speed adjustment allows the equipment to match different materials and welding processes, increasing precision and job quality. 4. Compact design: The device’s compact construction saves space in the workshop and makes it easier to move the unit between workstations. 5. Foot pedal controller: The foot pedal enables precise operation of the positioner, which is essential during welding and assembly of components. 6. Thermal fuse: The thermal fuse protects the device from overheating, improving operational safety and machine durability. 7. Brushed motor: The brushed motor ensures stable and effective operation, which is important for welding applications. 8. Table tilt range 0 - 90°: The possibility to tilt the turntable from 0 to 90 degrees allows working in the optimal position, improving the quality of welds and operator comfort. 9. Option to mount a centering chuck: This allows precise and stable workpiece clamping, essential for accurate assembly and welding tasks. Advantages: 1. Increased work efficiency: The ability to rotate cylindrical components makes assembly and welding operations more efficient. 2. Reduced production costs: Enhanced precision and quality can help reduce scrap and improve overall production efficiency. 3. Repeatability of welds: The device ensures consistent weld and joint quality, which is essential in industries requiring repeatability. 4. Versatile use: Adjustable speed, rotation direction, and table tilt make the tool versatile for various applications. 5. Improved welder working conditions: The positioner allows welding in the optimal position, enhancing comfort and job safety. Set includes: Nedpfx Ajrigk Negioku 1. PS-310 positioner unit. 2. Foot pedal controller. 3. Power cable. 4. User manual. 5. Welding torch mast with holder. This set contains all necessary components to start operating the machine and utilize its full potential for assembly and welding. Technical specifications: Maximum load 30 kg Table diameter φ310 mm Tilt angle range 0° ~ +90° Rotational speed 1–15 rpm Rotational power 120 W Tilting speed manual Voltage 220V-1PH-50Hz Torch support Overall dimensions 500 × 500 × 440 mm Weight 34 kg *Three-jaw chuck not included in the set.

Sąlyga: naujas, Gamybos metai: 2026, The CORMAK PS-180 positioner is a versatile auxiliary device suitable for diverse production tasks. Its wide range of capabilities makes it ideal wherever components must be manipulated. The welding, painting, and mechanical sectors have recognized the quality and rotational functionality of our positioners. CORMAK’s positioners are the perfect solution wherever components or subassemblies need to be rotated, wound, or unwound. Key features and applications of the welding positioner: 1. Universal application: This positioner can be utilized for a variety of welding and assembly tasks, making it an extremely versatile tool in workshops and manufacturing plants. 2. Work on cylindrical components: It is particularly useful for welding cylindrical items such as tanks and pipes. With a table rotation range of 0-90°, it enables welding in the optimal position, thus improving weld quality and work efficiency. 3. Durability and robustness: The solid construction ensures long-lasting durability and resistance to intensive use, guaranteeing reliability and longevity. 4. Adjustable rotation speed: The ability to adjust the turntable’s rotation speed is crucial, as different tasks require various rotational velocities, allowing the device to be tailored to specific requirements. 5. Foot pedal control: An integrated foot pedal allows the operator precise control over the positioner’s operation, making it easy to adjust the rotation speed and direction — essential during welding and assembly. 6. Mounting slots: Mounting grooves facilitate the installation of clamps and chucks, enhancing the machine’s versatility and ensuring secure holding and rotation of components. 7. Simple and semi-automated production processes: The unit can be used both in manually operated and semi-automated production processes, speeding up work and increasing precision. In summary, the CORMAK PS-180 positioner is a valuable tool for various industrial sectors, especially where rotation and welding of cylindrical parts are required. Thanks to its versatility, variable speed adjustment, and precise control, it greatly assists operators in performing diverse welding and assembly operations. Nkedpfsrigkpjx Agieu Technical specifications: Rated load: 10 kg Worktable diameter: φ180 mm Tilt angle: 0°~＋90° Rotation speed: 1 to 8 rpm Rotation motor power: 15 W Tilting: Manual Voltage: 220V, single-phase, 50Hz Dimensions: 260 × 320 × 280 mm Weight: 10 kg *Three-jaw chuck is not included in the standard scope of supply.

Sąlyga: naujas, Gamybos metai: 2026, The PS-650 rotator by CORMAK is a versatile auxiliary device suitable for a wide range of production tasks. Its extensive capabilities make it ideal wherever components need to be manipulated. The welding, painting, and mechanical industries especially appreciate the quality and rotational features of our positioners. CORMAK rotators offer the perfect solution wherever components or subassemblies must be rotated, wound, or unwound. Main features, functions, and advantages of the welding positioner: Functions: 1. Rotation direction switch: Enables control of the table’s rotation direction. 2. Direction change switch: Allows the user to reverse the rotation direction of the table. 3. Stepless speed regulation: Enables the adjustment of the table’s rotation speed to suit the specific operation. 4. Compact, robust design: The solid construction ensures durability and reliability. 5. Foot pedal control: Facilitates easy operation and precise control. Nedjuc Tdqspfx Agieku 6. Thermal fuse: Provides additional safety during operation. 7. Brushed DC motor: Ensures reliable performance in diverse applications. 8. Tilt range 0–90°: The table can be tilted from 0 to 90 degrees, enhancing its utility for welding in various positions. 9. Option to mount a centering chuck: Allows for precise alignment of workpieces. Advantages: 1. Increased operational efficiency: The positioner enhances productivity in assembly and welding processes. 2. Reduced production costs: Automation or simplification of component rotation helps decrease production expenses. 3. Consistent joint quality: Ensures uniformity and repeatability of welds. 4. Versatile operation: Adjustable rotation speed and direction provide flexibility for various tasks. 5. Improved welder ergonomics: Supports comfortable and ergonomic working positions for operators. Machine specifications: - Rotation direction switch - Rotation disabling switch - Equipped with limit switches - High torque output - Durable brass bushing for 100% load transfer to the welded material - Stepless speed adjustment - Compact, robust frame - Foot pedal control - Wired remote control - Thermal fuse - Stable rotation speed regulation - Table tilt range: 0 – 90° - Option for self-centering chuck mounting Technical data: - Power supply: 400 V - Motor power: 300 W - Horizontal load capacity: 400 kg - Vertical load capacity: 200 kg - Table diameter: 650 mm - Maximum workpiece diameter: 693 mm - Table tilt range: 0° to +90° - Speed adjustment range: 0.2 – 1.8 rpm - Stepless speed control - Overall length: 850 mm - Overall width: 700 mm - Overall height: 680 mm - Weight: 122 kg The PS-650 positioner by CORMAK is a valuable asset in sectors where components need to be rotated and positioned, especially during welding processes. It increases efficiency, reduces costs, and improves work quality. *Three-jaw chuck not included.

Sąlyga: geras (naudotas), Mobile station-type welding fume extractor, dust extraction unit, filter ESTA SRF K-10 1.3 kW (230V) fan mounted on the clean air side. 2 m extraction arm reach. Airflow rate: 950 m³/h. Vacuum: 2800 Pa. The SRF K series is designed for extracting and filtering welding fumes and light grinding dust. It is an excellent solution for welding fume and other dust contamination problems. Welding or soldering fumes are filtered with an efficiency of 99.9%. High air flow capacity allows for the extraction of even large clouds of fumes. Automatic filter cleaning activated manually - after operation, simply connect the compressed air hose to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotating nozzle, which significantly extends the cartridge's service life. Nkodpfjlqw Igsx Agiou During welding, the unit does not need to be connected to a compressed air supply, thus maintaining its mobility.

Gamybos metai: 1996, Sąlyga: naudotas, Dust extractor, welding fume extractor, self-cleaning cartridge filter for plasma, laser, sandblasting, shot blasting applications. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring the high efficiency of the device. The fan is located on the clean air side, which minimizes the risk of explosion. Brand: STURM Model: 3-7x20/140 DLR P Year of manufacture: 1996 Motor power: 7.5 kW Airflow capacity: 4200 m³/h Inlet diameter: 200 mm Cartridge filter elements: 7 pcs. Filtration surface area: 140 m² Included: electrical schematic and partial ductwork Nodpfsif Rlusx Agieku