Elektrodas Suvirinimo Aparatas pirkti naudotą (3 728)

Būklė: naudotas, E-welding machine, stick electrode welding machine ESAB type LTG 250 Machine No. 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Output adjustment: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled (air cooling) - TIG welding possibly also possible, without torch package Mains connection: 380 V, 50 Hz, 32 A plug Space required (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition Lhsded N E Rvspfx Am Hef The unit was originally designed for TIG welding as well. The TIG torch package is not included and the function has not been tested. The water cooling was for the TIG torch package. Therefore, the unit is sold only as an electrode welding machine. Welding tests with stick electrodes provide very good results.

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 10480407, Nėra minimalaus kainos – garantuotas pardavimas didžiausią kainą pasiūliusiam! Pasiūlymo pateikimas įpareigoja laiku atsiimti įrenginį: tai turi būti padaryta 2026-05-11–2026-05-13 arba 2026-05-18–2026-05-21 laikotarpiu! ĮRENGINIO DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 400 x 300 x 200 mm Įrenginio svoris: 15 kg Išorinė nuoroda: Lot 6/ Forster Ledpfx Amoyn Ep Sj Hehf

Būklė: geras (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 87920908, Offer 24228 Technical Data: - Welding current: 400 A at 60% duty cycle - 320 A at 100% duty cycle - Adjustable welding current: 20 A to 400 A - Power supply: 400 V / 46 A - Includes: - Electrode welding cable Ljdpfx Amjv Hzq Se Hjhf - Ground cable - Connection cable - Space requirement: approx. W 450 x H 750 x D 600 mm - Weight: approx. 150 kg

Būklė: geras (naudotas), Suvirinimo inverteris, suvirinimo lygintuvas, elektrodinis suvirinimo aparatas, elektrodų suvirinimo staklės, elektrodų suvirinimo lygintuvas, suvirinimo aparatas, suvirinimo inverteris - Gamintojas: Kjellberg, elektrodinis suvirinimo aparatas – inverteris, tipas KU 412 - Suvirinimo galia: maks. 400 A - Suvirinimo kabelis su elektrodų laikikliu - Masės kabelis - Matmenys: 560/290/H500 mm - Svoris: 44 kg Lhedpfoi Agxuex Am Hjf

Būklė: geras (naudotas), Welding rectifier, electrode welding unit, electrode welding machine, electrode welding rectifier - Manufacturer: Migatronic, welding rectifier type LDE 250 - Welding output: max. 250 A - Welding cable with electrode holder - Ground cable Ledjhhfz Njpfx Am Hehf - Dimensions: 860/680/H650 mm - Weight: 164 kg

Būklė: naudotas, WIG ir elektrodinis suvirinimo aparatas MESSER GRIESHEIM, modelis Uniwig GW 280 AC/DC Gamintojo Nr. 4930185 Pagaminta 1985 m. Lhsdpfx Amexf Uw Se Hef WIG funkcija: 280 A prie 80 % darbinio ciklo AC 250 A prie 100 % darbinio ciklo AC 230 A prie 100 % darbinio ciklo DC Elektrodinis suvirinimas: 250 A prie 100 % darbinio ciklo AC 200 A prie 80 % darbinio ciklo DC Reguliavimo diapazonas: 3 stambios pakopos ir bepakopė reguliacija Maitinimas: 400 V, 50 Hz - 4 m ilgio žarnų komplektas su WIG degikliu - 2 ir 4 takto suvirinimo funkcija - Suvirinimo laiko reguliavimas taškiniam suvirinimui - Vandens aušinimas - Dujų slėgio reduktorius Matmenys (I x P x A): 1050 x 590 x 1000 mm Svoris: apie 300 kg Gera būklė

Būklė: naujas, Gamybos metai: 2026, aušinimo tipas: vanduo, Fiber laser cutting machine designed specifically for cutting carbon steel, stainless steel, galvanized steel, electrolytically galvanized steel sheet, silicon steel, aluminum, brass, copper, and other sheet metals (cutting thickness and material depend on the fiber laser source). Lhsdpfx Aov N A A Usm Hjf Technical specification: - Working area: 3000*1500 mm - Positioning accuracy: 0.03 mm/m - Repeat positioning accuracy: 0.03 mm/m - Maximum movement speed: 80 m/min - Maximum acceleration: 1.2G - Control system: CYPCUT - Polish language interface. Configuration list: 1. Cycut control system 2. MAX fiber laser source 3. Industrial computer and industrial touch screen 4. Swiss Ray Tools laser heads with automatic autofocus 5. JAPANESE Shimpo reducer 6. YASKAWA Japanese servo motors and drivers 7. Pneumatic components from Japan SMC 8. TAIWAN YYC rack and pinion 9. Tongfei water chiller 10. Machine frame welded from thick plate 11. 'Y' axis beam cast from aluminum 12. TAIWAN HIWIN linear square guide 13. Automatic lubrication system (X, Y, Z axis) 14. Electric sectional dedusting system

Būklė: naujas, Gamybos metai: 2024, Handheld Laser Welding Machine LWH-2000-N Relfar FWH20-S10A Scope of delivery: - Laser welding machine with cooling system - Welding torch with adjustable focal length and accessory kit - Fiber laser source from MAX Photonics or Raycus - Automatic wire feeder - Hose and cable set - Starter kit with nozzles and protective lenses Technical Parameters - Laser power: 2000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 3x400 Hz - Dimensions (with head mount): 630x1300x1500 mm Lodpjh H Ngtsfx Am Hohf Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours): commissioning and training Relfar FWH20-S10A Welding Head – Welding, Cutting, and Cleaning Otinus laser welding machines are supplied with a set of nozzles and protective glasses. This makes the machine exceptionally versatile and helps save money, as it eliminates the need to purchase a handheld plasma cutter or an additional device for rust and paint removal. Operation Thanks to the revolutionary welding system, any user can achieve excellent results after a brief training session. The cable allows the welder to work freely in multiple positions without moving the machine. The small heat-affected zone prevents excessive deformation. Welds are created quickly and efficiently, ensuring a correct and robust weld seam. Intended Use The laser welding machine is designed for professional use in workshops that require high-quality, aesthetic weld seams. Laser Source Specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminum: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminum: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminum: 7 mm Design The torch cable provides excellent freedom of movement, making welding in different positions much easier. The integrated controller, with its large, clear display, is intuitive to operate. The unit is equipped with a powerful cooling system, allowing use under demanding three-shift operation conditions. Operating Principle The laser welding machine melts the welding wire and the edges of the workpieces to be joined using laser heat. The focused beam is directed at the welding wire—fed through the wire feeder—and onto the joint area. When the trigger is pressed, the welding torch must be moved along the weld line in sync with the wire feed speed. A constant operating temperature for both the laser source and the torch is maintained by a water-cooling system. The beam output and cooling are managed by a controller, which regulates values according to user-defined parameters.

Būklė: labai geros būklės (naudotas), For sale: Professional industrial welding machine KEMPPI Kempomat 320 – a robust and reliable MIG/MAG welder. This equipment is from the renowned Finnish brand KEMPPI, known for its high quality and durability. 📋 Technical specifications: Model: KEMPOMAT 320 Welding current: up to 320 A Power supply: 3-phase (380V) Voltage range: approx. 15.5V – 30V Duty cycle: 320 A – 40% 265 A – 60% 205 A – 100% Protection class: IP23 Insulation class: H Cooling: fan 📦 Included: Kemppi Kempomat 320 welding machine Built-in wire feeder MIG/MAG welding gun Earth (ground) cable Gas cylinder with regulator Hose + wiring Transport trolley 🛠 Technical condition: Used equipment Shows normal signs of use (scratches, scuffs) Visual condition as shown in the photos Wire feeder complete (visible inside) Sold as shown in photos ✅ Advantages: Very durable industrial-grade construction Simple operation and parameter adjustment Powerful – suitable for heavy-duty workshop jobs Mobile thanks to the trolley ⚠️ Additional information: Ideal for workshops, production, and steel construction Pallet shipping available Possible shipping/personal collection Lodpfx Aoyzt Rlem Hehf

Būklė: naujas, Gamybos metai: 2026, Compact device utilizing FIBER technology designed for welding various types of metals, offering precision far superior to traditional welding methods. Advanced technological solutions used in the offered welder enable the creation of high-quality, repeatable welds on thin-walled materials and parts without the risk of deformation. Advantages of the laser welder: - Easy to operate – thanks to the implemented solutions and well-thought-out construction, the operator can begin work after brief training - Minimal indirect radiation; only protective goggles are required during operation to filter intense light Lhsdoizr Rljpfx Am Hof - Significantly faster welding compared to traditional methods, with productivity potentially increasing by 3 to 10 times - Concentrated beam: minimal material structure change due to the small heat-affected zone - Repeatable welds: nice weld seams with high strength - Capability to weld very thin materials, such as 0.5 mm stainless steel - Option to weld with or without filler wire Maximum power: 2000 W Laser wavelength: 1080 nm Weld penetration depth (stainless steel at 1 m/min): 4.57 mm Weld penetration depth (carbon steel at 1 m/min): 3.59 mm Weld penetration depth (aluminium at 1 m/min): 4.0 mm Weld penetration depth (brass at 1 m/min): 4.0 mm Welding speed: 0–120 mm/s Automatic wire feeder: Ø 0.8 – 1.6 mm Maximum power consumption: ≤6.0 kW Cooling system: water-based Operating voltage: 400V Shielding gas consumption: 20 L/min Dimensions: 600 x 1100 x 1100 mm Weight approx.: 185 kg LATEST GENERATION WELDING HEAD - WOBBLE-type head - Automatic wire feeder included - Adjustable spot size: 0–5 mm - High-power welding head allows multiple beam path types: ○,―,•, ꓷ, 0, ▲, 8 - Integrated connections for shielding gas and cooling system - Interchangeable nozzles allow welding at various angles - 10 m fiber optic cable connects the head to the power source - Welding parameters adjustable directly on the head, eliminating the need to approach the control panel - Fully ergonomic: thanks to its lightweight and flexible design, the head can weld even in hard-to-reach places - Easy to service – fast and trouble-free protective lens replacement Set includes automatic wire feeder The wire feeding system is synchronized with the welder’s programming. The feeder’s task is to supply filler, allowing the operator to focus entirely on head operation. Set contents: - Laser welder with integrated cooling system - Welding gun with focal length adjustment and complete accessory kit - Fiber laser source - Automatic wire feeder - Complete set of cables - Starter set of nozzles and protective lenses WELDABLE MATERIAL THICKNESSES Material / WELDER POWER 1000 W 1500 W 2000 W Stainless steel 0.5–3.0 mm 0.5–4.0 mm 0.5–5.0 mm Carbon steel 0.5–2.5 mm 0.5–3.5 mm 0.5–4.5 mm Galvanized steel 0.5–2.5 mm 0.5–3.0 mm 0.5–4.0 mm Aluminium 0.5–1.2 mm 0.5–1.8 mm 0.5–4.0 mm Brass 0.5–1.2 mm 0.5–1.8 mm 0.5–2.5 mm

Būklė: naujas, Gamybos metai: 2026, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unmatched precision and performance. This device is designed for welding various types of metals, delivering top-level quality and repeatability of welds. With its 3-in-1 function enabling welding, cutting, and laser cleaning, the unit is versatile and efficient across many industrial sectors. Ljdpskkbw Uofx Am Hehf Key Features and Advantages Advanced cooling system: The new, more efficient water-cooling system ensures optimal operating temperature, allowing for longer uninterrupted work and extending the device's lifespan. Innovative design: The ergonomic and lightweight welding head design allows for welding even in hard-to-reach areas. With the adjustable spot size (0-5 mm) and interchangeable nozzles, the operator has full control over the welding process. User-friendly – thanks to the applied solutions and thoughtful construction, the operator can start working after a short training session. Low indirect radiation – during operation, protective goggles for filtering strong light are sufficient. Significantly faster welding than traditional methods; efficiency can increase by 3 to 10 times. Focused beam: minimal structural change due to the small heat-affected zone. Repeatable welds – the weld seam is clean, and the joints offer high strength. Capable of welding very thin materials, such as 0.5 mm stainless steel. Option to weld with or without filler wire. Integrated laser cleaning function enhances the device’s range of applications. Cutting option – delivers excellent cutting quality, requiring no mechanical processing. Technical Specifications Maximum power: 3000 W Laser wavelength: 1070 nm Fiber length: 10 m Operating modes: Continuous / Modulated Air pressure: 10 – 15 L/min Welding speed: 0–215 mm/s Automatic wire feeder: Ø 0.8 – 2.0 mm Maximum power consumption: ≤11.0 kW Focal length: 150 mm Cooling system: Water-cooled Operating voltage: 400V Shielding gas consumption: 20 L/min Dimensions: 600 x 1100 x 1100 mm Weight approx.: 207 kg

Būklė: naujas, Gamybos metai: 2026, The CORMAK SL2000 laser welder is an advanced industrial fiber device offering integrated laser welding, cutting, and cleaning capabilities within a single unit. With 2000 W of power and a modern design, this machine excels in facilities prioritizing operational speed, weld quality, and reliability. As part of a special offer, the welder comes complete with a set of U-groove rollers, a PTFE wire feeding conduit, and a comprehensive cleaning kit: lens and nozzle. Key machine features: - High laser power – 2000 W – enables deep penetration welds and welding of thicker materials without multiple passes. Ledpjychl Ssfx Am Hshf - Welding speed up to 120 mm/s – significantly reduces production time compared to traditional methods. - Focused laser beam – minimal thermal impact, producing neat and durable weld seams. - Capability for welding very thin materials – stainless steel from 0.5 mm. - Option to weld with or without wire – process flexibility. - Laser cleaning and cutting modes – expand the device’s range of applications. - Automatic wire feeder – synchronized with software for full process control. Design & technology: The CORMAK SL2000 is equipped with a 1080 nm fiber laser source and an advanced head with a 0–5 mm adjustable spot, enabling seams even in hard-to-reach areas. The unit's water cooling system and 230V operating voltage make it safe for use in various production environments. Interchangeable nozzles and an ergonomic build facilitate use and maintenance. Precision & work efficiency: The penetration depth for stainless steel at 1 m/min reaches 4.57 mm, which is competitive within this device class. Precise parameter adjustment gives the operator full control over weld quality—whether for thin or structural components. Beam stability ensures repeatability and aesthetics. Applications: - Metalworking shops and industrial locksmiths - Production of balustrades, lightweight structures, and steel frames - Automotive, household appliances, electronics industries - Metal part cutting and cleaning services Standard equipment: - Laser welder with integrated cooling system - Welding gun with adjustable focal length - Fiber laser source - Automatic wire feeder Ø 0.8–1.6 mm - Complete cable set - Starter kit of nozzles and protective glasses Technical data: Maximum power 2000 W Laser wavelength 1080 nm Penetration depth (stainless steel at 1 m/min) 4.57 mm Penetration depth (carbon steel at 1 m/min) 3.59 mm Penetration depth (aluminum at 1 m/min) 4.0 mm Penetration depth (brass at 1 m/min) 4.0 mm Welding speed 0–120 mm/s Automatic wire feeder Ø 0.8–1.6 mm Maximum power consumption ≤6.0 kW Cooling system water-cooled Operating voltage 230V Shielding gas consumption approx. 10–12 L/mm wire Ø Dimensions 600 x 1100 x 1100 mm Weight approx. 185 kg

Būklė: geras (naudotas), Apsauginių dujų suvirinimo aparatas, lankinio suvirinimo įrenginys, MIG/MAG suvirinimo įrenginys, impulso suvirinimo įrenginys - Gamintojas: Ess, apsauginių dujų suvirinimo aparatas - Tipas: Pulsarc 350 - Didžiausia suvirinimo galia: 350 A Ljdpfox Hi I Dox Am Hohf - Vandeniu aušinamas - Vielos padavimo lagaminas: ESS DVK 400, 4 ritinėlių pavara - Matmenys: 970/670/H1040 mm - Svoris: 209 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, CNC valdomas koordinatinis suvirinimo įrenginys Darbo sritis: X ašis: 2.000 mm Y ašis: 1.200 mm Lhjdpfx Amey Er Uqo Hjf Z ašis: 190 mm Suvirinimo našumas: 20 kA Suvirinimo jėga: 2 x 5 kN

Būklė: naudotas, gerklės gylis: 420 mm, nominali galia esant 50% darbo ciklui: 60 kVA, įėjimo įtampa: 400 V, aušinimo tipas: vanduo, nominali (akivaizdi) galia: 14 kVA, Taškinio suvirinimo aparatas TECNA 8003 tipas – skirtas veržlių ir lakštų suvirinimui – visiškai kapitališkai suremontuotas ir patikrintas. Nominali įtampa: 400V Nominali galia: 60kVA prie 50% darbo ciklo Trumpasis jungimas: 22kA Suvirinimo srovė: 17,6kA Apsauga: 125A Pasiekiamumas: 420mm Elektrodų jėga: 470daN Cilindras su išankstiniu eiga Bendras eiga: 80mm Dviguba eiga: 60mm Elektrodų kūgis MK2 – naujas elektrodų laikiklis Naujas dviejų pakopų kojinis jungiklis pagal UVV Visos pneumatinės ir vandens žarnos pakeistos Svoris apie 330kg Ledpeh N Sd Usfx Am Hshf - TE 180 su suvirinimo srovės skaitmeniniu rodymu, srovės didėjimu ir t.t. - Pagrindinis jungiklis valdymo spintoje - Yra originali dokumentacija / eksploatavimo instrukcija - Įrenginio patikra su patvirtinimu iki 2026-02 Demonstracija ir apžiūra pagal susitarimą, Paleidimas ir apmokymai pas klientą už papildomą kainą galimi Įrenginys yra Dresdene, netoli A17. Tinkamą aušinimo įrenginį visada turime sandėlyje – žinoma, už papildomą kainą ;-)

Būklė: naudotas, Gamybos metai: 2013, mašinos/transporto priemonės numeris: 22640M03, Parduodama galinga stacionari taškinio suvirinimo mašina / varžų suvirinimo įrenginys iš žinomo gamintojo AWL-Techniek. Įrenginys puikiai tinka pramoninėms reikmėms, serijinei gamybai bei naudoti automatizuotose gamybos linijose ir robotizuotose ląstelėse. Dėl didelės 130 kVA galios įrenginys optimaliai pritaikytas sudėtingiems metalo suvirinimo procesams. Techniniai duomenys: Gamintojas: AWL-Techniek Modelis: BR453K2B Pagaminimo metai: 2013 Įtampa: 400 V Dažnis: 50 Hz Fazės: 3P + PEN Srovė: 250 A Galia: 130 kVA Svoris: apie 500 kg Įranga: Stacionari taškinio suvirinimo sistema Suvirinimo replės su varinėmis elektrodais Sukamasis stalas / ruošinių laikiklis Valdymo blokas su valdymo pultu Pneumatinis spaudimo blokas Pramoninė (Heavy Duty) konstrukcija Pritaikymo sritys: Lodoy Erp Uopfx Am Hjhf Automobilių pramonė Metalo apdirbimas Serijinė gamyba Robotsuvirinimas / automatikos linijos Lakštinio metalo apdirbimas

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras aukštis: 1 000 mm, bendras plotis: 800 mm, bendras ilgis: 1 100 mm, bendras svoris: 150 kg, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! Pasiūlymo pateikimas įpareigoja pasiimti laiku tarp 2026.06.23 ir 2026.06.26! ELEKTRA BECKUM elektrodinio suvirinimo aparato ir autogeninio suvirinimo aparato aukcionas! ĮRANGOS DUOMENYS Išmatavimai (I x P x A): 1.100 x 800 x 1.000 mm Svoris: 150 kg Pastaba: Dujų balionai, matomi nuotraukose, nėra įtraukti į pristatymą. Ledpfx Amjy D Nqao Hehf Išorinė nuoroda: 17

Gamybos metai: 1999, būklė: geras (naudotas), Tartomány a szöghosszban: 50–90 mm Sebesség: 100 szög/másodperc (frekvenciaszabályzóval) Vezérlés: Siemens S5 PLC Lhsdpfxodmbp Uj Am Hef

Būklė: geras (naudotas), Taškinio suvirinimo aparatas, taškinio suvirinimo mašina, taškinio suvirinimo įrenginys, taškinio suvirinimo replės, varžinio taškinio suvirinimo aparatas, svirtinis taškinio suvirinimo aparatas, ritininio siūlės suvirinimo mašina, iškilimų suvirinimo mašina - Gamintojas: Dalex, taškinio ir iškilimų suvirinimo mašina su aukščio reguliuojamu stalu Lsdpfoy Au Nfox Am Hohf - Tipas: PMS 14-4 - Nominali galia: 200 kVA - Strėlės išsikišimas: 740 mm - Valdymas: pėdų pedalu - Atskirų dalių sąrašas: žr. nuotraukas - Pateikimas/kaina: pilnas komplektas - Matmenys: Mašina 1940/850/H1690 mm / stalas 2450/980/H790 iki 1150 mm - Svoris: 953 kg / 48 kg

Būklė: geras (naudotas), Taškinio suvirinimo aparatas, taškinio suvirinimo mašina, taškinio suvirinimo įrenginys, taškinio suvirinimo replės, atsparumo taškinio suvirinimo aparatas, svirtinė taškinio suvirinimo mašina, ritininio siūlės suvirinimo aparatas, iškilimų suvirinimo aparatas Ledey Au Eyjpfx Am Hohf -Gamintojas: Dalex, taškinio ir iškilimų suvirinimo mašina su ritiniu stalu -Tipas: PMS 14-4 -Nominali galia: 200 kVA -Išsikišimas: 740 mm -Valdymas: kojiniu pedalu -Komponentai: žr. nuotraukas -Parduodama/kaina: pilnas komplektas -Matmenys: aparatas 2120/890/H1680 mm / stalas 2730/800/H1055 mm -Svoris: 966 kg / 70 kg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SWM001, įvesties srovės tipas: Nuolatinė srovė, nominali galia esant 50% darbo ciklui: 37 kVA, įėjimo įtampa: 380 V, aušinimo tipas: vanduo, bendras svoris: 230 kg, garantijos trukmė: 24 mėnesiai, suvirinimo galia (maks.): 75 kVA, bendras plotis: 500 mm, bendras aukštis: 1 620 mm, bendras ilgis: 950 mm, Taškinis suvirinimo aparatas / suvirinimo aparatas su vandens aušinimu - 75KVA - galios, varžos nustatymai ir kt., + atsarginiai antgaliai Lhjdpeyl Sy Esfx Am Hsf

Gamybos metai: 1989, būklė: paruoštas naudoti (naudotas), Various spot welding machines and a Dalex chiller are available. 1) 2x Dalex PL 80-1 spot welding machines, rated power (50% duty cycle): 80kVA, max. welding power: 245kVA, max. short-circuit current: 35kA, primary voltage: 380V, open-circuit voltage: 8.44V, cooling water flow: 10l/min, electrode force range: 100daN-600daN. 2) Dalex PMS 10/1 spot welding machine, rated power (50% duty cycle): 32kVA, max. primary short-circuit current: 30kA, primary voltage: 380V, open-circuit voltage: 4.6V, electrode force range: 65daN-390daN. 3) Dalex SL 16/EA spot welding machine, rated power (50% duty cycle): 16kVA, connected load: 37kVA, secondary short-circuit current: 17kA, electrode force range: 17daN-278daN, open-circuit voltage: 3.6V, weight: approx. 200kg. 4) 2x Dalex spot welding tongs RS 11 and 3136. 5) Dalex DRF 4 water chiller, year of manufacture: 1989, refrigerant: R22, charge weight: 3.5kg, flow rate: 1.3m³/h, max. operating overpressure: 26bar, cooling capacity: 4.5kW, weight: approx. 140kg. On-site inspection is possible. Package sale preferred. Lhedpfx Amsy Eg Dte Hef

Būklė: geras (naudotas), Taškinio suvirinimo įrenginys, taškinio suvirinimo staklės, taškinio suvirinimo sistema, taškinio suvirinimo replės, varžinio taškinio suvirinimo įrenginys, svirtinis taškinio suvirinimo aparatas - Gamintojas: Dalex, 2 susietos taškinio suvirinimo staklės su padėjimo stalu Lhedpfx Ameyz Rd As Hsf - Tipas: SL 25/EA - Nominali galia: po 25 kVA - Iškyša: 600 mm - Tarpinė tarpa: iki 1590 mm - Valdymas: kojiniu pedalu - Atskiri komponentai: žr. nuotraukas - Matmenys: staklės 2140/1160/H1220 mm / stalas 1565/1075/1140 mm - Svoris: 535 kg / 112 kg

Būklė: naujas, Gamybos metai: 2018, Automatinis kampinis suvirinimo aparatas Gamintojas: Diez Lhjdpfewriuusx Am Hof Tipas: AWS4535 Pagaminimo metai: 2018 Darbo valandų nėra! Suvirinimo rėmas: 500 x 350 mm Juostos plotis: 32 mm Išoriniai matmenys: 170 x 130 x 135 cm 16426ä

Būklė: paruoštas naudoti (naudotas), Resistenzaus Schweißmaschine, Widerstandsschweißer, Meritus RAS 150 VSH, Gebrauchtmaschine Hersteller: Meritus Typ: RAS150VSH, MPW-RW 811-1410 Lhedpfx Asrdf Acem Hef Gesamtmaße: 900 x 1370 x 2450 mm Elektrische Daten: 415 V; 150 kVA; 50 Hz Ausstattung: - Lichtschranke - Werkzeug-Wasserkühlung