Suvirinimo Dūmų Siurbimo Sistema pirkti naudotą (20 468)

Būklė: naudotas, siurbimo galia: 1 000 m³/val, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. Suitable for welding, grinding, and all types of dry dust. Equipped with cartridge filter elements. Gisdpfx Acorywfvoyep Additionally fitted with a HEPA filter for extra-fine filtration. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high filtration efficiency. Fan power: 1.6 kW Airflow capacity: 1,000 m³/h

Būklė: geras (naudotas), filtravimo plotas: 180 m², siurbimo galia: 9 000 m³/val, Dust extractor, welding fume extractor, filtration ventilation unit, self-cleaning pneumatic vacuum dust collector, absorption unit for plasma, laser, sandblasting, and all types of dry dust. PLYMOVENT MDB / AZUR Cartridge filter elements are cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is located downstream of the filter on the clean air side, which minimizes the risk of explosion. Giedju A Thlepfx Acysp Inlet diameter: 400 mm Fan power: 7.5 kW Capacity: up to 9,000 m³/h Filtration area: 180 m² Dimensions: Height – 3.10 m Width – 2.80 m Depth – 1.25 m Fan: 1.00 m x 1.00 m

Būklė: naudotas, Gamybos metai: 1994, filtravimo plotas: 250 m², siurbimo galia: 7 500 m³/val, Dust extraction, welding fume extraction, filter ventilation, self-cleaning pneumatic vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Donaldson Torit model: 3DF12 cyclopeel – with pre-separator. Gjdpswgknxefx Acyjip Cartridge filter elements cleaned pneumatically with compressed air pulses during operation, providing high efficiency. The fan is positioned after the filter on the clean side, minimizing explosion risk. Cartridge filter elements. Fan power: 5.5 kW Maximum capacity: 7,500 m³/h Filtration surface: 250 m² Number of filter cartridges: 12 pcs Inlet diameter: 315 mm Dimensions: Filter unit: Width – 2.15 m x 2.25 m Height – 3.15 m Control cabinet: Length – 1.20 m Width – 0.80 m Height – 0.40 m Fan: Length – 1.20 m Width – 0.80 m Height – 1.20 m Stock number: 0988

Būklė: geras (naudotas), Gamybos metai: 2017, siurbimo galia: 16 600 m³/val, neigiamas slėgis: 5 600 Pa, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high performance of the unit. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-24 Year of manufacture: 2017 Cartridge filter elements, oval – DFO ULTRA-WEB FR – 24 pcs Filtration surface area: 430 m² Fan power: 45 kW Fan model: ART 631 N4T Integrated frequency inverter and RITTAL SK 3305540 control cabinet air conditioner. Capacity: 16,600 m³/h Gedpfjttah Ujx Acyeip Inlet diameter – 1 x 350 mm, 2 x 300 mm Rotary airlock for dust discharge. Complete with silencer and full technical and electrical documentation. Offer also includes new filter cartridges made to order and matched to the unit’s application.

Būklė: naudotas, Gamybos metai: 1998, Mobile, stationary welding fume extractor. Dust extraction unit with self-cleaning filter, vacuum type. NEDERMAN FILTERBOX 663. Device equipped with an electromotor-driven filter cleaning system. Fan with 1.5 kW power located on the clean air side. Three-phase motor. Extraction arm length: 3 m. Stock no.: 0980. Gedpjwdhb Rsfx Acysip

Būklė: naudotas, Gamybos metai: 2011, filtravimo plotas: 418 m², siurbimo galia: 14 000 m³/val, neigiamas slėgis: 3 600 Pa, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: VALCO Model: PPX-18-W3 Thanks to the W3 certification, this filter can be used for welding high-alloy steels. The filter is cleaned by compressed air impulses during operation, ensuring high device efficiency. The fan is installed on the clean air side, minimizing explosion risk. Giedpowiuaqjfx Acyjp Specifications: Capacity – 14,000 m³/h Vacuum – 3,600 Pa Filtration surface – 418 m² Cartridge filter elements – 18 pcs Fan – 15 kW Inlet diameter – 450 mm Total length – 2.80 m Total width – 1.35 m Height – 4.00 m Year of manufacture: 2011 Complete technical documentation available. 2 units of this device available. Stock no.: 0986 1/2

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 2 595 h, filtravimo plotas: 302 m², siurbimo galia: 13 250 m³/val, neigiamas slėgis: 7 230 Pa, The Gold Series industrial dust collector is a leading system for dust and fume extraction generated during welding, grinding, thermal cutting, shot blasting, sandblasting, and glass bead blasting. It is ideal for capturing toxic and flammable dusts and fumes. The vertically mounted cartridge filters in the Gold Series collector utilize patented HemiPleat technology, ensuring they stay cleaner and last longer than conventional pleated filters. The vertical orientation allows for effective pulse-jet cleaning with compressed air. Various cartridge options provide optimal filtration efficiency for different dust types, including fine, fibrous, and heavy dust loads. The filter is pneumatically cleaned with compressed air pulses during operation, guaranteeing high device efficiency. The fan is positioned on the clean air side, minimizing the risk of explosion. Brand: Camfil Godpsvu Tpcofx Acysip Model: Gold Series GS10 Year of manufacture: 2019 Operating hours: 2,595 h New HemiPleat eXtreme Flame Retardant cartridge filters – 10 pcs. Filter area: 302 m² Fan power: 37 kW Airflow: 13,250 m³/h Vacuum: 7,230 Pa Inlet diameter: 500 mm Equipped with HEPA H14 Absolute VGXL filters and noise muffler. The device was used for stainless steel grinding. The unit is in excellent condition (like new), used exclusively indoors.

Būklė: naudotas, Gamybos metai: 1999, siurbimo galia: 5 600 m³/val, neigiamas slėgis: 3 000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and for all types of dry dusts. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. Filter cartridges: Sinbran type. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for the separation of organic material aerosols, such as those generated during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with those of rigid body filters: a large filtration surface area requiring minimal space. High mechanical load capacity, very long service life, low pressure drop, and high filtration efficiency represent a new approach to dust extraction, achieving impressive filtration results even in particularly challenging applications. The high mechanical stability of the filter material ensures long lifespan. Compared to conventional rigid filters, it causes minimal pressure loss. Short pulses of compressed air during the filtration process provide efficient filter cleaning. Fan power: 7.5 kW Capacity: 5600 m3/h Sinbran filter cartridges: 12 pcs. Gijdevxtkzspfx Acyep Vacuum: 3000 Pa

Būklė: geras (naudotas), siurbimo galia: 3 300 m³/val, neigiamas slėgis: 2 000 Pa, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter for plasma, laser, sandblasting, shot blasting applications. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: DUST HOG / UAS Model: SBS-4-2 SD Motor power: 4 kW Fan housed in a soundproof enclosure. Gjdpfxsunh Uvo Acysip Capacity: 3300 m³/h Vacuum: -2000 Pa Filter surface area: 112 m² Inlet diameter: 300 mm Cartridge filter elements: 4 pcs Height: 3.90 m Depth: 1.70 m Width: 1.25 m

Būklė: nepatikrintas (naudotas), Welding fume extractor, dust extractor, self-cleaning pneumatic vacuum filter. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically by compressed air pulses during operation, which ensures high efficiency of the unit. Fan power: 3.2 kW Airflow: 1,600 m³/h Giodpfxoip Nkte Acysp

Gamybos metai: 2000, būklė: geras (naudotas), Welding Fume Extractor, Dust Extraction Unit, Self-Cleaning Pneumatic Vacuum Filter by ESTA Model: SRF P13 JET Suitable for welding, grinding, sandblasting, and all types of dry dust. Giedjirt Amjpfx Acyep The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high efficiency of the device. Fan power: 3 kW Airflow: 1850 m³/h Filter surface area: 15 m² Vacuum: 4300 Pa Inlet diameter: 2 x 160 mm Year of manufacture: 2000

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7024000257, įvesties srovės tipas: trifazis, bendras svoris: 1 500 kg, įėjimo įtampa: 400 V, bendras plotis: 160 mm, bendras ilgis: 290 mm, bendras aukštis: 260 mm, tūrio srautas: 7 000 m³/val, siurbimo galia: 7 000 m³/val, neigiamas slėgis: 2 500 Pa, suslėgto oro jungtis: 6 juosta, galia: 11 kW (14,96 AG), įėjimo dažnis: 50 Hz, įėjimo srovė: 50 A, valdymo spintos plotis: 50 mm, valdymo spintos ilgis: 60 mm, valdymo spintos aukštis: 75 mm, Įranga: Tipinė plokštelė prieinama, Camfil LC06-211 ištraukimo įrenginys. - NAUJAS ĮRENGINYS, nenaudotas, niekada neįdiegtas - NAUJI FILTRAI, vis dar nauji filtrai, įrenginys turi 0 darbo valandų, tiesiai iš transportavimo pakuotės (žr. nuotraukas) Įrenginys tinkamas: suvirinimo dūmams, pjovimo dūmams, plazmos dūmams, pjovimo dulkėms, suvirinimo dulkėms, šlifavimo dulkėms, plazminio pjovimo, lazerinio pjovimo taikymams. Variklio galia: 11 KW Oro srautas: 7000 m3/h Maksimali vakuumas: 2500 PA. Įtampa: 400V Dažnis: 50HZ Svoris: 1200 KG. Jungties / įsiurbimo skersmuo: Ø 350 mm Komplekte: - Pilna dokumentacija. Gedpfxoycwg Es Acyoip - CE sertifikatas - Elektros schema ir dokumentacija. - WEG elektros variklis. Iš pradžių pirktas Bystronic lazerinio pjovimo įrengimui, bet niekada ten neįdiegtas! Daugiau informacijos, apžiūrai ar įsigijimui – skambinkite ar rašykite el. paštu!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, SRF Master – Illustration Left 2 m Extraction Arm Application Area: - Low amounts of smoke/dust - Occasional use Benefits: - Minimal repositioning of the extraction hood required - Increased flexibility due to additional hose connection at the rear Features: - Safe operation via filter monitoring - Extraction hood can rotate and swivel 360 degrees - Push handle and cable holder Process: 3-stage Filter Type: Disposable filter Filter Surface Area: Approx. 12 m² Separation Efficiency: > 99% Gijdpfx Ajdqzbrecysp Filter Material: Glass fibre fleece Welding Fume Separation Class: W3 Additional Filters: Two pre-filters Basic Data: Extraction Capacity: Max. 950 m³/h Extraction Arm Diameter: Ø 150 mm Extraction Arm Length: 2 m Suction Connection Diameter: Ø 150 mm Power Supply: 230 V / 50 Hz Motor Power: 1.1 kW Sound Pressure Level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: Approx. 71 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, SRF Maxi (picture right) 3 m extraction arm Application Area - Medium quantities of smoke/dust - Regular use Giodpfx Acodqzcvsysp Benefits - Minimal repositioning of the extraction hood required - Contamination-free filter replacement - Safe operation thanks to phase sequence detection - High cost-effectiveness due to long filter service life Features - Safe operation with filter monitoring - Extraction hood can be rotated and swivelled 360 degrees - Start/stop automatic (optional) - Workplace lighting (optional) Technical Data Process: 2-stage Filter type: disposable filter Filter area: approx. 20 m² Separation efficiency: > 99% Filter material: polyester fleece Welding fume separation class: W3 Additional filter: pre-filter (aluminium mesh) Basic Data Extraction capacity: max. 1,100 m³/h Extraction arm diameter: Ø 150 mm Extraction arm length: 3 m Suction connection diameter: Ø 150 mm Power supply: 3 x 400 V / 50 Hz Motor output: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Būklė: labai geros būklės (naudotas), Votan Type: Jenoptik Votan W4 Votan Jenoptik Modular Laser Welding System Votan Jenoptik Laser Machine Votan W Modular Laser Welding System Gijdpfx Ashr Dliecyjp Laser welding allows you to join plastic components precisely, energy-efficiently, and quickly. This process creates strong and durable weld seams that are free of markings on the visible side. Thus, plastic welding with laser technology also meets the highest aesthetic standards. Rated voltage/frequency: 3x 400 V / N / PE / 50 Hz Control voltage: 24 V DC Max. current: 20 A Main fuse: 25 A Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Būklė: beveik kaip naujas (naudotas), Scanlab PowerScanII 50i Aperture: 50 mm Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (opt.) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale) 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position Resolution (max.)* 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-hour Drift (after 30 min.): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner digital controller card Control Interface (Options): digital SL2-100 Advanced Diagnostics: yes (iDRIVE) Supply Voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: scan head Connector Positions: opposite to beam exit Weight without lens (standard housing): 35 kg Dimensions (L x W x H) (standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam Offset: 72.72 mm Other Features Water Cooling: yes Air Cooling: yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Deviation from Zero Position: < 5 mrad Gijdpfx Asxp Iw Hjcyep Condition: used Scope of Delivery: (see picture) (Technical data subject to change and errors excepted!) Shipping & Pickup: Secure pallet shipping (by arrangement) or pick-up on site possible. Feel free to contact us by phone for further questions.

Būklė: beveik kaip naujas (naudotas), Scanlab PowerScanII 50i Aperture: 50 mm Encoder: Galvanometer scanner with analog position detector Optics – Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics – Number of Installed Tunings: 1 Typical Tuning: Fast-Vector-Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% full scale): 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position Resolution (max.): 18 bit for XY, 16 bit for Z Nonlinearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min. warm-up): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Controller: Galvanometer scanner Digital controller board Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: yes (iDRIVE) Supply Voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H – standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam Offset: 72.72 mm Other Features Water Cooling: yes Air Cooling: yes Gsdpfx Acoxp Iybsyjip Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, bendras svoris: 45 kg, įėjimo įtampa: 230 V, bendras plotis: 4 064 mm, bendras ilgis: 7 366 mm, bendras aukštis: 6 604 mm, filtravimo plotas: 5 m², siurbimo galia: 180 m³/val, presavimas: 36 000 Pa, galia: 1,5 kW (2,04 AG), The device has seen very little use and is in very good condition, fully operational. Gijdpfjvpgkcex Acyep Specifications The ClearO2 W100 is designed as a complement to Translas 8XE MIG and 8XR MIG Cobot extraction units. By pairing the extraction torches of the 8XE MIG and 8XR MIG Cobot extraction systems with the ClearO2 W100, up to 90–98% of welding fumes are captured directly at the source and filtered with an efficiency of > IFA 99.8%. Due to its light weight—only 45 kg—and its four wheels (two of which are lockable), the compact unit is perfectly suited for relocation within the workspace. Automatic Cleaning The ClearO2 W100 features an automatic cleaning mechanism via reverse air pulse. When the vacuum pressure in the filter becomes too high, the system automatically initiates filter cleaning. Manual cleaning can also be started at the press of a button. An automatic start/stop function for energy savings and synchronization with the 8XE MIG and 8XR MIG Cobot extraction units comes as standard in ClearO2 units. As soon as the torch is removed from the specially designed holder, the machine starts operating automatically. Continuous Duty Motor The unit’s electric motor is designed for continuous operation without loss of performance. Due to the automatic cleaning function and simplified motor system, maintenance requirements are minimal, making the device both durable and time-efficient. With a filter area of 5 m², this is one of the most efficient devices in its size class—offering the largest filter available. The filter is a disposable type and provides an active surface area rated at: IFA >99.8% efficiency. Lightweight and Mobile ClearO2 W100 units are designed with the needs of a single welder who needs to change workplace locations in mind. Applications include shipbuilding, wind tower construction, tank construction, and other similar manufacturing industries. The four wheels with two locks and the low weight—just 45 kg—allow the welder to easily move the device to the next workstation. [Source: translas]

Būklė: paruoštas naudoti (naudotas), Merkle W 420 AC/DC TIG Insquare Welding Machine Welding System Please refer to image no. 2 for technical specifications. You are welcome to visit for an inspection. We are happy to organize an affordable shipping service for you! You will receive a proper invoice. Net invoices can be issued for foreign customers, provided a valid VAT ID number is supplied. Gedpfx Asu Hg Aqjcyjip Subject to prior sale. Visit our shop and have a look at our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 18133-00 12632868, įėjimo įtampa: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Gsdpfx Aow Hw Dgecyjip

Būklė: naujas, Table height: 650 - 1050 mm Gisdpsfk Aifsfx Acysp Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Weight approx.: 733 kg This allows the user to flexibly adjust the working surface height according to requirements, enhancing productivity and ergonomics. Height adjustment is standardly achieved via a manual hydraulic system within a range of 650 to 1050 mm (other heights available on request). Like the SST fix series, the worktop features a 100 x 100 mm grid of Ø 28 mm holes. When used in combination with processing machines, test or post-processing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the respective machine. The table systems can be easily relocated on site using a pallet truck. These mobile systems, with their various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the work surface can be cost-effectively replaced if worn in the future. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Būklė: naujas, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Approx. weight: 850 kg Gjdpfofk Aigjx Acyoip Special work table systems of the SST, SFT, and SWT fix series are designed as 3D clamping workstations for efficient assembly, welding, and bonding of various constructions, such as fixtures, railings, frames, etc. With the aid of a comprehensive range of clamping accessories (see the welding table accessories catalog section), these table systems can also be used as flexibly reconfigurable fixtures and thus enable high-quality production of small and medium batches. The special work tables feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which is equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The table perforation allows for the use of a wide variety of clamping and positioning aids. For special applications, the surface of the table top can optionally be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials like ST70, deviating from the standard. Due to the fully bolted construction of the clamping plate, the working surface can be easily and cost-effectively replaced in case of wear, ensuring the table system remains particularly sustainable. Price must be confirmed by the manufacturer prior to ordering! For accessories and further information, please follow this link:

Būklė: naujas, Table height: 800 mm Dimensions (LxWxH): 2480 x 1230 x 800 mm Table width: 1230 mm Table length: 2480 mm Weight approx.: 650 kg Special Workbench Systems of the SST, SFT, and SWT fix Series are designed as 3D clamping workstations for efficient assembly, welding, and bonding construction processes, such as fixtures, railings, frames, etc. With the extensive range of clamping accessories (see catalogue section: Welding Table Accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium-sized batches. The special work tables feature either a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole pattern. Additionally, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole grid allows the use of a wide range of clamping elements and positioning aids. For special applications, the tabletop surface can be optionally supplied in stainless steel 1.4301, aluminium, plastic, or high-strength materials such as ST70, deviating from the standard. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively if worn in the future. This ensures the table system remains particularly sustainable for long-term use. Price must be requested from the manufacturer before placing an order! Gedpfx Acjfk Aiheysip For accessories and further information, please follow this link:

Būklė: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg This enables the user to flexibly adjust the working surface height to individual requirements, improving both efficiency and ergonomics. Height adjustment is provided as standard by a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The work surface is equipped—just like the SST fix series—with a 100 x 100 mm, Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing devices (deburring, marking, checking) can be adjusted to match the clamping table height of the machine. Godpfx Asfk Aivscyjip The table systems are easily relocated using a pallet truck. These mobile systems, with their various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely maintained on site and, if necessary, sent for repair. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in the event of wear. The table below (Table 2) provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Būklė: naujas, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 Table width: 950 mm Table length: 1950 mm Approx. weight: 355 kg Gisdefk Ai Depfx Acysp Special workbench systems from the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding constructions, such as fixtures, railings, frames, etc. With the extensive range of clamping accessories (see welding table accessories catalog section), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium batches. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The perforated table allows for the use of a wide variety of clamping and positioning elements. For special applications, the table surface can optionally be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, deviating from the standard. Thanks to the fully bolted construction of the clamping plate, the work surface can be economically replaced in case of wear, which makes the table system particularly sustainable. Price must be requested from the manufacturer before ordering!! For accessories and further information, please follow this link: