Strypas pirkti naudotą (1 086)

Sąlyga: naudotas, Gamybos metai: 2021, Number of spindles: 8 Bar capacity: 36 mm Control: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle bar automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36, equipped with bar loader and coolant system. The machine has only 6,944 spindle hours. The machine is in very good condition and can be inspected under power. For further equipment details, please refer to the original order confirmation attached to the offer. The machine operates with an EGS loading system -> Rodpfewf D Szsx Ah Hjbt This can be purchased separately. An extensive tooling package is included in the scope of delivery. A machine video from the factory location is available upon request. #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: naudotas, Gamybos metai: 2019, Number of spindles: 8 Bar capacity: 36 mm Control: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle bar automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar loader and coolant system. Rsdpfswgi D Ejx Ah Hsbt The machine has only 15,666 operating hours (spindle hours). The machine is in very good condition and can be inspected under power. Please refer to the original order confirmation attached to the offer for further equipment details of this machine. The machine operates with an EGS loading system -> This can be purchased separately. A comprehensive tooling package is included in the scope of delivery. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: naudotas, Gamybos metai: 2019, Number of spindles: 8 Bar capacity: 36 mm Control unit: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36, equipped with bar loader and coolant system. The machine has only 15,650 spindle hours. The machine is in very good condition and can be inspected under power. For further equipment details, please refer to the original order confirmation included with the offer. The machine operates with an EGS loading system -> This can be purchased separately. A comprehensive tooling package is included in the scope of delivery. Rjdpowf D S Isfx Ah Hebt ----- #Tags: MULTISPRINT36 | MULTISPRINT-36

Sąlyga: geras (naudotas), Gamybos metai: 1984, Thomann EED 20 Automatic Bar Twisting Machine Rbodpowbglijfx Ah Hot For square and flat iron bars Working range: 6-20 mm Flat steel: 10/3-30/10 mm Twisting length: 25-900 mm Technical Specifications Length: 1200 mm Width: 660 mm Height (without base): 350 mm Height (with base): 1150 mm Weight (without base): 120 kg Voltage: 380 V Motor power: 0.75 kW Rotational speed: 7 rpm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, veleno skylė: 20 mm, veleno greitis (maks.): 10 000 aps./min, strypo praėjimas: 20 mm, Įranga: dokumentacija / vadovas, CNC staklė su slankiojančia galvute Citizen L520, 2000 metų gamyba Valdymas: Cincom Mitsubishi Meldas, 7 ašys (X1/Z1/Y1/C1/X2/Z2/C2) Strypo Ø maks.: 20 mm, Sukimo ilgis maks.: 205 mm, Pagrindinis velenas, maks. apsukos 10 000 sūk./min., C ašis 0,001 laipsnio, Rbjdjt St A Topfx Ah Hjt Kontrvelenas, maks. apsukos 10 000 sūk./min., C ašis 0,001 laipsnio, Įrankio laikiklis 18 įrankių (linijinis laikiklis, priekinis, galinis apdirbimas), Gyvieji įrankiai ant pagrindinio veleno, FMB strypų padavėjas. Staklės dirba be problemų ar defektų, galima apžiūrėti gamyboje veikiant. Staklės turi visus dokumentus ir instrukcijas.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Conveyor belts for light roundwood / posts / poles etc. 1 piece = 5,000 mm length, 280 mm belt width, with double transport rollers. Redpfx Ahewut Nhs Hobt 1 piece = 6,500 mm length, 240 mm belt width, with trough below the belt. 1 piece = 3,950 mm length, 300 mm belt width, with double transport rollers.

Gamybos metai: 2024, Sąlyga: naujas, The R-BM rod mill is ideally suited for crushing hard, brittle, and hard-tough materials such as ceramics, clinker, construction materials, glass, minerals, ores, silicon, slags, and many more. Rsdpsgbubcofx Ah Hsbt

Sąlyga: geras (naudotas), Offer 23477 Hydraulic Flat Bar and Section Shear with Punching Unit Technical Data: - Flat Steel Shear: cuts up to 350 x 12 mm - Section Steel Shear: - cuts angle steel 90° up to 100 x 10 mm - Round Bar Shear: - cuts round steel up to 32 mm - Notching Unit: - rectangular notcher 50 x 90 mm - Punching Unit: - punching force: 550 kN - with back gauge table - throat depth: 220 mm - punches steel up to 32 mm Ø in 12 mm thickness - Coordinate Table - Manual back gauge - Electric foot switch - Drive: 400 V / 2.2 kW - Space requirement: approx. W 900 x H 1750 x D 1700 mm Rodpfera Avdsx Ah Hsbt - Weight: approx. 1200 kg

Sąlyga: geras (naudotas), Gamybos metai: 1984, Offer 24126 Motorized Bar Twisting Machine + Ring and Arch Bending Machine Technical Data: - Bending process motorized with automatic or manual operation Rbsdpjr Ik N Dsfx Ah Hst - Bending capacity, square steel ST 37 up to approx. 30 mm - Bending capacity, flat steel ST 37 up to approx. 30 x 8 mm - Adjustable bending length between twisting units up to approx. 1200 mm - Minimum twisting length 10 x material thickness (long side) - Preselection for bending time / bending length rotation - Right and left-hand rotation - Tailstock - Arc and ring bending device GRB 66 with various roller sets - Bending capacity: - Flat steel 60x10 mm upright, R 700 mm - Flat steel 70x12 mm flat, R 500 mm - Round tube 1 ½" x 2, R 800 mm - Square tube 40x40x3, R 1500 mm - Angle 45x6, R 600 mm - Roller sets for round tubes, steel 1 ¼", plastic 1 ½" - Standard roller set - Space required approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW - Weight approx. 250 kg

Gamybos metai: 1998, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 4422758898019, Offer 22646 Hydraulic Profile and Bar Shear with Notching Device and Punching Unit Technical Data: - Flat Bar Shear - Flat steel: up to 400 x 16 mm - or: 300 x 18 mm Rbodpfx Asmb U Sljh Hjt - Profile Steel Shear - L and T profiles at 90°: up to 130 x 12 mm - Square / Round steel: 40 / 40 mm - Notching Unit - With square notcher for sheets up to approx. 13 mm - Notching depth: approx. 70 mm - Notching width: approx. 52 mm - Punching Unit - Punching force: approx. 60 t - Throat depth: 400 mm - Stroke: approx. 10 to 50 mm - Punches holes in steel up to Ø 31 mm in 15 mm thickness - Material stop - Various: 10 punch dies + matrices included - Drive: 400 V / 5.5 kW - Space requirements: W 1100 x H 2000 x D 1700 mm - Weight: approx. 2100 kg

Gamybos metai: 2008, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 431808, Ref. No. 18177 Hydraulic flat, profile, and bar steel shear with notching device and punch Technical Specifications: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - Profile steel shear cuts L-angle steel at 90° up to 130 x 13 mm - Bar steel shear cuts round steel up to 45 mm - square steel up to 45 mm - Notching device with square notching unit 100 x 42 x 10 mm - Punching unit – Punching force 600 kN – with gauge table – Throat depth 300 mm – punches in steel up to 28 mm Ø in 15 mm or 34 mm Ø in 12 mm - Manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg Redpfx Aomidyijh Hsbt

Sąlyga: naudotas, Gamybos metai: 1998, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5,020 rpm Rbsdpfx Aevh Naqeh Hst Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Polygon turning attachment - Thread cutting unit - Hydraulic pick-off device - Workpiece conveyor belt - Bar feeder, manufacturer: PIETRO CUCCHI, type AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant unit

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: L220M0165, tekėjimo ilgis: 510 mm, tekėjimo skersmuo: 250 mm, veleno greitis (maks.): 6 000 aps./min, X ašies eiga: 175 mm, Z ašies eigos atstumas: 550 mm, Maintenance of the machine in 2024 for €10,000 Rodpfx Ahowcnubo Hebt TECHNICAL DETAILS Control: CNC Fanuc I Series Swing diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool Carrier Turret: 12-position Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Parts counter: 1,313,733 Control on-time: approx. 53,000 h EQUIPMENT - Tailstock - LNS Turbo bar feeder

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 11 kW (14,96 AG), Bar steel shear, manufacturer Schubert, model STS 100 Used, very good condition Rbedpfxotukqqe Ah Hst Technical data: Shearing force/diameter (max.): 1000 kN / 52 mm Drive power: 11 kW Equipment/Features: bar magazine, 6 m, length stop 650 mm, safety device

Sąlyga: naudotas, Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5053-4053142274002, galia: 30 kW (40,79 AG), Bar steel shear, manufacturer Peddinghaus, model Caddy 63 Technical data: Shear force/diameter (max.): 2000 kN / 63 mm Drive power: 30 kW Rodpfxetukpas Ah Hobt Equipment/Special features: Bar magazine, 6 m

Sąlyga: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available Rodpfx Ahenh R Eke Hebt • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Sąlyga: naujas, Gamybos metai: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping Rjdpfx Asnfvx Noh Hobt • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. Rbsdpfenfvy Ujx Ah Het POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Sąlyga: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result up to 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room Rbodpfx Aheng Amke Hjt • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Sąlyga: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: Rjdpfong A R Ssx Ah Hebt • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Sąlyga: naujas, Gamybos metai: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII For tube dimensions from 20 - 90 mm, this bending system provides solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there is ample room for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the robust and rigid design of the mandrel carrier and bending arm, contribute to the desired bending result. The plug-in bending tools allow for quick changeover to other tube dimensions. The clamping pressure for tube fixation can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring the springback values, a freely programmable database for up to 200 materials is available. The control system offers two operating modes: In 'Simple Bending', the system automatically displays the length and rotation of the bows relative to each other. In 'Controlled Bending' mode, the data is pre-set, and a continuous target/actual comparison is performed during the bending process. Also available with pneumatic stop or with gear-assisted length and rotation positioning. APPLICATION AREAS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal construction • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm depending on material • Bending radius min/max: 40 mm/250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø ) • Multifunction machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Maximum 180º bending angle • Weight: 1600-3200 kg (depending on model) Rbsdpfx Ahonh R Sue Het • Ergonomic operation via safety foot switch OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Semi-automatic positioning of length and rotation via servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WiFi), or USB OUR SERVICE: • Welcome to test production at our facility in the demonstration room • Consultation and information meeting at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Gamybos metai: 2024, Sąlyga: naujas, Band rolling machine BRT 100 with mandrel Ø 18 mm - rolls materials of various diameters and widths at a bending angle up to 360° - secure clamping of the material thanks to the rack-and-pinion system - high working precision due to hardened and ground mandrels - quarter mandrel ensures sharp-edged rolling (optional) Bending capacity: cold: up to 100x5 mm cold: up to Ø 12 mm hot: up to 100x15 mm hot: up to Ø 30 mm Rollable diameters with mandrel: 6.0-31.5 mm / with roller: 32-60 mm Rbjdefmy Ahopfx Ah Hst

Gamybos metai: 2023, veikimo valandos: 0 h, Sąlyga: naujas, The MATRIX55S is suitable for cutting your reinforcing steel to the desired length (optionally available with the Synclone45S double bender). Rodpfsm Tqazex Ah Hjbt Product information: - Hydraulic motor: 7.5 kW - Synclone45S optional for double bending - 360° rotatable digital control panel - Optional barcode system available - Total weight: 5,200 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Sąlyga: naujas, Gamybos metai: 2024, Bar material, new, with a length of 6000 mm per bar Rbjdpfxorkz Tmj Ah Hst

Sąlyga: naujas, Gamybos metai: 2022, Bar material as new – ready for immediate pickup Rodpfxsrkz Uce Ah Hsbt