Stovas Serverschrank pirkti naudotą (1 487)

Būklė: naudotas, Gamybos metai: 1994, Pjovimo ilgis 5300 mm, pjovimo aukštis 2200 mm, pjovimo aukštis 80 mm, rankinis padavimas, matavimo sistema – skalė, laisvai stovinčios atramos, vardinė srovė 21 A. Nwsdpfx Aoytrhrecpof Sandėlio vieta: Nattheim

Būklė: geras (naudotas), Kodas: 0365 Gamintojas: LTF Modelis: SB 25 - CE Standartas Stulpinė gręžimo staklė medžiui, metalui ir įvairioms medžiagoms – CE Standartas Techniniai duomenys: Trifazis variklis, 2,5 kW Apsauginis ekranas Gręžimo talpa iki 25 mm Aukštis reguliuojamas stalas Nwjdpfxjy E Trkj Acpef Stalo matmenys: 350 x 350 mm Veleno kūgis: 3 cm 9 greičiai Veleno apsisukimai: 230 ÷ 1910 aps./min. Stulpo skersmuo: 92 mm Stalo/veleno atstumas: 720 mm Pagrindo/veleno atstumas: 1250 mm Stulpo/veleno atstumas: 225 mm Bendri matmenys: 400 x 750 x 1800 mm (aukštis) Svoris: 180 kg

Būklė: naudotas, 14 skyrių, apie 2000 kg kiekvienam skyriui. Atraminis gylis: 200 mm kiekvienam skyriui. Plotis: 6713 mm. Gylis: 4200 mm. Aukštis: 2955 mm. Nodpfx Acjxcv Akopowf

Būklė: naudotas, 2.250 x 2.250 x 6.700 mm I x P x A Nodpfxjy Ar Sqs Acpowf

Būklė: naujas, veleno tvirtinimas: MK 4, sukimosi greitis (maks.): 1 600 aps./min, sukimosi greitis (min.): 95 aps./min, – Talpa: MK4 Gręžimo plieną našumas: 32 mm Gręžimo ketaus našumas: 40 mm Sriegimo gebėjimas pliene: M24 Sriegimo gebėjimas ketausyje: M32 Nwsdpfxey Etyhj Acpof – 95/1600 aps./min – Sriegimo funkcija – Stalas: 540 × 470 mm – Aušinimas – Pavarų pavara – Apsauginis gaubtas – Avarinis stabdis – Sriegimo galva su tvirtinimo įvorėmis – Dokumentacija – 400V

Būklė: naudotas, Gamybos metai: 2001, Naudota mašina Pagaminimo metai: 2001 Įranga ir techniniai duomenys: - Pjovimo ilgis: 5300 mm - Pjovimo aukštis vertikaliai: 2150 mm, horizontaliai: 2100 mm - Maksimali pjovimo gylis: 60 mm - Pjūklo disko diametras: 250 mm; kiaurymė: 30 mm - Variklis: 4 kW - Apsisukimai: 5100 aps./min - Medžiagos atrama su ritinėliais - Fiksuoti atraminiai elementai saugiam ruošinių pastatymui - Vidurinė atrama: stabilūs atraminiai elementai darbinio aukščio lygyje, atskirai rankiniu būdu išlankstomi Nwjdpexvnpcefx Acpsf - Matavimo nuskaitymas: - horizontalūs pjūviai per skalę - horizontalūs pjūviai per juostinį atmušą nuo 50-500 mm - vertikalūs pjūviai per atmušą nuo 0-1300 mm - Oro slėgio jungtis pneumatiškai atitraukiamai groteliniam pagrindui (būtinas oro slėgis: 6 bar) - Įpjovimo sistema: pagrindinio pjūklo disko dvigubu pjūviu – pjūklo disko panardinimo gylis tiesiog perjungus ribojamas, kad pjūklas įprastu režimu įpjauna ruošinį Prieinamumas: iškart Sandėlio vieta: Röllbach

Būklė: naujas, veleno tvirtinimas: MK 4, Įranga: dokumentacija / vadovas, – Pajėgumas: MK4 Gręžimo galimybė pliene 32 mm Gręžimo galimybė ketausyje 40 mm Sriegimo galimybė pliene M24 Sriegimo galimybė ketausyje M32 – 95/1600 aps./min – Automatinis padavimas – Sriegimo funkcija – Stalas 540 × 470 mm Nsdjy Emqmjpfx Acpowf – Aušinimas – Pavaros mechanizmas – Apsauginis gaubtas – Avarinio stabdymo mygtukas – Sriegimo galvutė su tvirtinimo įvorėmis – Dokumentacija – 400V

Gamybos metai: 2025, būklė: naujas, Medžiagų laikiklis Nr. 100006, aukštis 650-1050 mm, milteliniu būdu dažytas, RAL 7011 Nedjxqrghepfx Acpowf

Būklė: geras (naudotas), Gamybos metai: 1996, GILLARDON GB 40 V Gręžimo pajėgumas ST 60: 40 mm Gręžimo pajėgumas GG 20: 50 mm Maksimalus gręžimo skersmuo ST 60: 55 mm Sukimas į dešinę ir kairę Sriegimo įranga Nodpfoylygmsx Acpswf Aušinimo sistema MK 4 Veleno apsukos be pakopų: 140 - 1100 aps./min 3 automatiniai pastūmos variantai: 0,1; 0,16; 0,25 mm/aps. Atstumas stalas / velenas: 135 - 760 mm Atstumas stalas / pagrindas: 1200 mm Stalo matmenys: 630 x 530 mm Išoriniai matmenys apie: 630 x 985 x 2020 mm su - Besutariamas sukimosi greitis - 3 automatinės pastūmos

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, įrankio skersmuo: 75 mm, veleno tvirtinimas: MK 5, Įrankio laikiklis MK5 Stalo dydis 1040x600 mm; maksimali stalo apkrova 1200 kg Gręžimo skersmuo pliene 70 mm, ketus 75 mm, sriegimas pliene iki M 60 Sūkių diapazonas (1/min) 35–1238, pastūma (mm/aps) 0,05–0,5 Išsikišimas 630 mm, veleno eiga 300 mm Atstumas stalas–velenas 540–1470 mm Stalo aukštis apie 700 mm Gręžimo galva elektriškai reguliuojamo aukščio Pagrindinis pavara 7,5 kW Matmenys A/P/G apie 3320/1300/1900 mm Vartotojo vadovas Nwsdpfxjyzmlps Acpef

Būklė: naudotas, Gamybos metai: 2017, maks. pjovimo plotis: 4200 mm maks. pjovimo aukštis: 2200 mm pjūklo disko skersmuo: 250 mm maks. apdirbimo storis: 60 mm pjūklo disko skylė: 30 mm apatinis pagrindas: plastikiniai padėklai medžiagos padėjimas: įtraukiamos plastikinės juostos matuoklis: skalė pjūklagalvio pasukimas: rankinis Nwedpfx Acexg Igiepef pjūklo padavimas: rankinis tvirtinimas: pastatomas laisvai nusiurbimas: išorinis pjūklo balkio fiksavimas: rankinis svoris apie: 1000 kg matmenys: 5600 x 1700 x 3000 mm variklio galia: 4,2 kW Sandėlio vieta: Nattheim

Būklė: naujas, Gamybos metai: 2020, Gręžimo galia pliene (skersmuo): 40 mm Išsikišimas: 220 mm Gręžimo eiga: 120 mm Veleno tvirtinimas: MK 4 Veleno greičiai: 105 - 1257 aps./min. Pavarų skaičius: 8 pakopos Darbo stalo tvirtinimo plotas: 400 x 320 mm Pagrindo plokštė: 390 x 650 mm Maitinimo įtampa: 400 V / 50 Hz Bendras energijos poreikis: 1,1 / 1,8 kW Nwjdpoy Erwlofx Acpof Staklių svoris: apie 0,3 t Matmenys (I-P-A): 2,1 x 1,0 x 0,7 mm Su greito keitimo grąžto griebtuvu 3–16 mm, Grąžto griebtuvo apsauga, Darbo stalas pasukamas, pakreipiamas ir reguliuojamo aukščio, Aušinimo skystis, Apšvietimas, Veleno sukimas į abi puses, Mechaninis gręžimo gylio ribotuvas,

Gamybos metai: 2020, būklė: naudotas, Module 4 Diameter 180 mm Bore diameter 40 mm Width 67 mm Number of teeth per row 5 Weight 15 kg Cutter is as new, no signs of use Other used rack cutters group cutters up to module 10 available on request Nwodjm Avwzspfx Acpsf

Gamybos metai: 2020, būklė: naudotas, Module 10 Diameter 180 mm Bore diameter 40 mm Width 75 mm Number of teeth per row 2 Weight 14 kg Cutter is in mint condition, with no signs of use Njdpfx Acsm Avwwepowf Further used rack milling cutters up to module 10 available on request.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, 727 USED rotary oven for 60x40 trays, electric. Year of manufacture: 2014 The oven consists of two units: a rotary oven and a deck oven – a chamber with a hearth (stone) plate. 1. Rotary oven for 60x40 trays, electric. EXTERNAL DIMENSIONS (in cm): - width: 100 - depth: 120+23 - height: 230 TECHNICAL DATA: - Number of shelves/levels: 10 - Power: 16 kW - The oven is equipped with a steam injection system. 2. Baking chamber oven EXTERNAL DIMENSIONS (in cm): - width: 60 - depth: 80 - height: 17 TECHNICAL DATA: Power: 12 kW + 6 kW (steam injection) The equipment is ready for inspection at our warehouse (36-068 Bachórz, Poland). Available paid options: refurbishment / transport / installation / commissioning. Njdpfertqz Hox Acpswf The listed price is net. WE SPEAK ENGLISH, GERMAN, AND FRENCH.

Būklė: geras (naudotas), Šlifavimo disko skersmuo: maks. 300 mm Nodpow Emahefx Acpowf Sūkių skaičius: 1.500 aps./min. Pavaros galia: 1,5 kW Staklių matmenys (I x P x A): 750 x 420 x 1100 mm Svoris: apie 130 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: naudotas, Remontuotina vienkolonė ekscentrinė presė CHINA, modelis JB23-16 Mašinos Nr. 1711BL16D11-17, pagaminimo metai: 2017 Presavimo jėga: 16 tonų Išsikišimas: 160 mm Stalo matmenys: 480 x 320 mm, su 18 mm T-formos grioveliais Stūmoklio paviršius: 175 x 130 mm Stalo kiaurymė: Ø 125 mm Stūmoklio eiga: 60 mm Nwodpfoyxrhwox Acpof Stūmoklio reguliavimo eiga: 40 mm Didžiausias įrengimo aukštis: 330 mm Tvirtinimo žiedo skylė: Ø 35 mm Stūmoklio eiga: 130 eigų/min. Variklio galia: 2,2 kW Maitinimas: 380 V, 50 Hz - mechaninė besisukančios pleištinės sankabos sistema - nėra eigos reguliavimo Reikalingas matmenų plotas (I x P x A): 1300 x 900 x 1850 mm Svoris: 790 kg Reikalingas mechaninis remontas, sankaba stipriai spragsi. Išlaisvinimo mechanizmą būtina peržiūrėti. Atlaisviname vietą Nebrangus įrenginys – puikiai tinka eksportui.

Būklė: naujas, Tekančiojo gręžimo pajėgumas pliene St 12.03: 20 mm Gręžimo pajėgumas pliene St 60: 40 mm Trumpa verpstė MK 4 Verpstės eiga: 160 mm Svirtis: 300 mm Stulpo skersmuo: 145 mm Stalo paviršiaus naudojamas plotas: 615x430 mm T griovelių skaičius - plotis - atstumas: 2x14x224 mm Atstumas tarp verpstės ir stalo: 147/688 mm Padavimas: 0,1-0,2-0,3-0,4 mm/aps. Verpstės apsukos: 140-4000 aps./min. Bendras energijos poreikis: 4,0 kW Mašinos aukštis: 1885 mm Standartinė įranga: Nedpjyv Nxbefx Acpjwf - Elektromagnetinė padavimo sankaba su apsauga nuo perkrovos ir elektriniu valdiklio kryžminiu jungikliu - Valdymo ir apšvietimo transformatorius - Užrakinamas pagrindinis jungiklis - Variklis su šilumine apsauga - Grybo formos (fiksuojamas) avarinio stabdymo mygtukas valdymo pulte - Sukimas į dešinę per kontaktorinę valdymo sistemą - Neribota sukimosi greičio reguliacija - Skaitmeninis apsukų indikatorius - Elektroninis sukimosi greičio valdymas - Apsaugos klasė IP 54 - Variklio izoliacijos klasė "F" - Verpstės apsauga su elektriniu saugikliu

Būklė: naujas, Gręžimo galia pliene: 32 mm Gręžimo eiga: 125 mm Trumpa griebtuvo kūgio tipas: MK 3 Iškyša: 210 mm Stalo naudojamas paviršius: 390x390 mm Stalo apkrova: 65 kg Veleno sukimosi greitis: 150–2.500 sūkių/min Energijos poreikis: 16 A Bendra galia: 1,5 kW Įrenginio matmenys: 750x450x1745 mm Įrenginio svoris: apie 187 kg Standartinė komplektacija: Nwjdjyv Npgopfx Acpof - Bespirštė sukimosi greičio reguliacija - Aušinimo skysčio įranga įrengta staklių pagrinde - Mobilus LED staklių apšvietimas - Pasukamas darbo stalas su integruotu stakliniu spaustuvu kitoje pusėje; žandų plotis 120 mm - Maitinimo laidas su kištuku, tad įrenginys paruoštas naudojimui - Gręžimo stalas reguliuojamas krumpline pavara - Gylio ribotuvas su skale - Avarinio stabdymo mygtukas - Atitinka galiojančius CE reikalavimus

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm Nwodpod Tbbdofx Acpef - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. Nwjdpfx Acomhhx Iepof The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. Nedpfjmhhyasx Acpewf The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Nedjh Ek Daepfx Acpowf Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. Nodod Tqaljpfx Acpswf According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Nwedjfdkb Uopfx Acpef Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.