Stabdžių Būgnas pirkti naudotą (2 194)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Neumünster
902 km
Viengubo būgno volas
CATERPILLARCS64B / 2018 BJ / 3997 H
Skambinti
Būklė: naudotas, Gamybos metai: 2018, veikimo valandos: 3 997 h, CAT CS64B volas iš 2018 metų, tik su 3 997 moto valandomis!
- Gamintojas: CAT
- Modelis: CS64B
- Pagaminimo metai: 2018
- Nuskaitomos darbo valandos: apie 3 997
- Darbinis svoris: 12 305 kg
- Galia: 97,9 kW
- Pirmas savininkas
- Geros būklės
- Oro kondicionierius
Gusdpfxeyxuzgo Af Dja
- Papildomos nuotraukos ir vaizdo įrašas pagal užklausą
- Kaina: 54 900 Eur, be PVM + 19 % PVM
Dėl papildomos informacijos prašome skambinti.
Visa pateikta informacija yra be garantijos, galimi neatitikimai ir tarpinis pardavimas.
Mažas skelbimas
Braak
899 km
Atrankos būgnas
Doppstadt Komptech Eggersmann TerexCribus , Nemus , SM620, T60,T70, TTS
Skambinti
Gamybos metai: 2026, būklė: naujas, Būgniniai sietai – aukščiausia kokybė visoje Europoje – tinka visiems įprastiems sijotuvams
Siūlome būgninius sietus, pagamintus pagal aukščiausius Europos kokybės standartus, tinkamus šiems modeliams:
Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725,
Gusdpfx Afoyxk D Do Dsa
Terra Select T4–T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser
ir daugeliui kitų tipų.
Techninės savybės ir variantai
Pagaminta pagal individualius Jūsų reikalavimus
Angų dydis: kintamas, apvalus arba kvadratinis
Išdėstymas: pakaitomis arba tiesus
Mažiausi tilteliai maksimaliam sijojimo našumui
Suvirintos spiralinės juostos optimaliai medžiagų tėkmei
Galimi įvairūs medžiagos storio variantai
Aštriais kraštais perforuoti lakštai iš aukštos kokybės specialaus plieno
Jūsų privalumai
Geriausia kokybė visoje Europoje
Daug modelių iš karto sandėlyje
Pristatymas visoje Vokietijoje (pagal pageidavimą – visoje ES)
Trumpi pristatymo terminai ir sąžiningos kainos
Susisiekite su mumis dėl individualaus pasiūlymo!
Mažas skelbimas
Germany
999 km
Viengubo būgno volas
BomagBW 332 DEEP Impact
Skambinti
Būklė: naudotas, Gamybos metai: 2011, veikimo valandos: 3 725 h, 2011 | Bomag BW 332 DEEP Impact | Naudotas volo ritinys | 3725 darbo valandos
📍 Vieta: Vokietija
🚛 Pristatymas prie jūsų durų – naudokite mūsų transporto skaičiuoklę, kad įvertintumėte pervežimo išlaidas!
💰 Pirkite dabar už 138 500 EUR arba pateikite pasiūlymą.
Apmokėjimas atsiėmimo metu galimas už nedidelį mokestį (priklauso nuo patvirtinimo)*
Gjdpfjyux Eyex Af Deua
👷♂️ Nepriklausomo eksperto patikrintas
43 tikrinimo punktai: 30 patvirtinta ✅ 13 su trūkumais ℹ️ 0 rimtų defektų ⚠️
📌 Inspektoriaus komentaras:
Pilnai veikiantis, yra neprioritetinių priežiūros darbų
📄 Norite pamatyti visą patikrą, papildomas nuotraukas ar vaizdo įrašą?
Patarimas: Nuoroda „38821 Equippo“ dažnai naudojama ieškant daugiau informacijos internete.
💡 Kodėl verta rinktis šią mašiną ir mūsų paslaugas:
✔ Kruopšti profesionalų apžiūra
✔ Pristatymas į objektą
✔ Piniginė grąžinimo garantija
✔ Saugios ir lanksčios atsiskaitymo galimybės
🔄 Ieškote kitos technikos?
Siūlome patogius įrankius ir išteklius visiems įrangos savininkams ir operatoriams – lengvai prieinama mūsų platformoje.
Mažas skelbimas
Kreuztal
1 157 km
Hidr. Paspauskite stabdį
AMADAHFBO 220/3 3100 x 220 to
Skambinti
Būklė: labai geros būklės (naudotas), Techniniai duomenys:
Darbo ilgis: 3100 mm
Statramsčio plotis: 2560 mm
Spaudimo jėga: 220 t
CNC valdymas: OPERATOR II grafic
Valdomos ašys: Y1/Y2; X1/X2; R1/R2; Z1/Z2
Lenkimo simuliacija
automatinis bombiravimas
motorizuotas reguliuojamas atatrankos sustojimas
Iškišimas: 650 mm
Eiga: 200 mm
Darbo aukštis: 960 mm
Lazerių stebėjimas: FIESSLER
Variklio galia: 17 kW
CE ženklas
Matmenys (ilgis x plotis x aukštis): apie 3700 x 2400 x 2900 mm
Svoris: apie 15 tonų
Priedai:
Gusdpfx Ajyzm Nhsf Doa
1 komplektas įrankių:
1 viršutinė dalis – 120 mm
1 apatinė dalis – kubinė matrica: V 50, 35, 22, 16
Būklė:
Labai gera būklė, pilnai renovuota 2026 m.
Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašina atitinka savo amžių pagal išvaizdą, techniką ir nusidėvėjimą; naudotos mašinos parduodamos be jokios garantijos.
Mažas skelbimas
Ahaus
1 162 km
Paspauskite stabdį - hidraulinis
ERMAKPOWER BEND PRO 4.260
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Pressure: 260 t
Bending length: 4100 mm
Distance between uprights: 3600 mm
Throat depth: 410 mm
Ram speed: 180 mm/sec
Working speed: 10.0 mm/sec
Return speed: 185 mm/sec
Stroke: 275 mm
Installation height: 5 mm
Table height: 900 mm
Table width: 160 mm
Backgauge – adjustable, max. 800 mm
Operating hours: approx. 900 h
Oil capacity: 300 l
Operating voltage: 400 V
Total power requirement: 22.0 kW
Guedjywzwfopfx Af Dea
Weight: 100 kg
Dimensions (L x W x H): 51 x 23 x 3000 mm
Current new price: approx. €110,000
With only approx. 900 operating hours (!!)
Special price on request
-----
POWER BEND PRO electro-hydraulic press brake with:
* Increased installation height
* Extended cylinder stroke
* Enlarged throat depth
-----
Equipment:
- DELEM CNC control model "ER 2D Graphic"
* 2D graphical programming mode
* High-resolution display
* Bend sequence calculation
* Tool and program library
* Swiveling control unit, front left
- CNC-controlled axes: Y1 - Y2 - X - R
as well as CNC crowning
- CNC electro-motorized backgauge
* Travel ranges:
- X axis: 800 mm
- R axis: 2 mm
* Travel speeds:
- X axis: 0 mm/s
- R axis: 3 mm/s
* On ball screw spindles
* 2x manually adjustable stop fingers
- Divided ROLLERI "PS 1" gooseneck upper tool
* Including crowning device in tool holder
- 1x universal reversible die block
* Dimensions: 160 x 160 mm
* V-opening: 100 mm
* V-opening 100+ mm with entry rollers
- Rear safety device: light barrier
- BOSCH/HOERBIGER hydraulic components
- SIEMENS electrical components
- FIESSLER AKAS laser safety guard at the front of the machine
- 2x front support arms with SLIDING system (HIWIN slide bearings)
- 1x free-moving double foot pedal
- CE mark / Declaration of Conformity
- Operating manual incl. wiring and hydraulic diagrams
Mažas skelbimas
Lambsborn
1 289 km
Stabdžių variklis | Haffner padavimas | Būklė gera
Maka/GriggioT 2000
Skambinti
Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Kairės-dešinės sukimosi kryptys, 3-1000 aps./min., stabdymo variklis su Haffner 3 ritinėlių padavimu, 8 greičių, gera būklė. Transportavimas galimas už papildomą mokestį!
Gusdpsybv A Asfx Af Dja
Mažas skelbimas
Berkel en Rodenrijs
1 328 km
2014 NORDIC S342 su stumdomu stogu | kietmedžio grindys | Saf diskiniai stabdžiai | Cinkuotas važiuo
NORDICS342 sliding roof | hardwooden floor | Saf disc...
Skambinti
Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 10/2014, spalva: kitas, Gamybos metai: 2014, Tuščias svoris: 7 600 kg
Gjdpfxoy Aw N Ij Af Deua
1 ašis: kairė 2 mm, dešinė 6 mm
2 ašis: kairė 8 mm, dešinė 8 mm
3 ašis: kairė 6 mm, dešinė 8 mm
Mažas skelbimas
Saerbeck
1 118 km
PASPAUSKITE STABDŽIŲ AD-S, 1260
DurmaAD-S 1260
Skambinti
Būklė: naujas, Gamybos metai: 2024, Lenkimo galia 60 t
Lenkimo ilgis 1250 mm
Atstumas tarp statramsčių (mm) 1050, 7,5 mm
Eigos ilgis (mm) 265
Išsikišimas 410 mm
Montavimo aukštis 530 mm
Darbinis greitis Y (mm/sek.) 10
Variklio galia kW 7,5
Darbinis greitis X (mm/sek.) 250
Ilgis (mm) 2300
Plotis (mm) 1550
Aukštis (mm) 2750
Svoris (kg) 3 100
Gusdped E If Sofx Af Dsa
Standartinė komplektacija:
Y1, Y2, X, R (4 ašys) X=650mm X, R
Valdymo pultas – DURMA DT15
Europos spaudimo matrica
60 mm matricos laikiklis (tik Europos matricoms)
Išsikišimas 410 mm
Galinio atramos sistema: Siemens DC servovariklis, linijinis kreiptuvas, rutulinis varžtas
Apsauginis gaubtas
Papildoma įranga:
Europos viršutinis įrankis P97.75.R08 (vienas segmentuotas)
Europos apatinis įrankis M.460R.85 (vienas segmentuotas)
DURMA greito fiksavimo sistema
CE su rankiniu F.AKAS II M -FPSC-B-C + apsauginis gaubtas ir jungiklis
Kitos mašinos paruoštos demonstracijoms pas mus Staufenberge.
Papildomą informaciją suteiksime pagal užklausą.
Mažas skelbimas
Saerbeck
1 118 km
PRESS STABDYS
DURMAAD-S 40320
Skambinti
Būklė: naujas, Gamybos metai: 2024, Bending force: 320 t
Year of manufacture: 2024 (New)
Control system: DT 15
Bending length: 4050 mm
Distance between uprights: 3600 mm
Y rapid traverse speed: 100 mm / s
Y working speed: 10 mm / s
Y return speed: 100 mm / s
Motorized crowning
Table length: 630 mm
Table width: 154 mm
Table height: 900 mm
Stroke: 365 mm
Throat depth: 450 mm
2 support arms
2 backgauge fingers
X-axis travel speed: 350 mm / s
X-axis travel: 750 mm
R-axis travel speed (max.): 300 mm / s
R-axis travel: 250 mm
Standard equipment:
Y1, Y2, X (3 axes)
Y1, Y2, X = 650 mm (double-guided, aluminum)
D-BEND software for 3D bending simulation and alignment
Manual crowning
R-axis, manual
Backgauge with motor as well as linear guide and ball screw
Backgauge fingers with height adjustment (R-axis, manual)
CE die holder system (upper dies)
Front support arms for sheet metal, sliding (with T-slot and stops)
Hydraulic blocks and valves in special design, meeting global standards
Electrical equipment according to international standards
Option:
CE certified
Motorized crowning
and X & R-axis backgauge
Motor power: 37 kW
Oil tank capacity: 250 l
Length: 5300 mm
Width: 1910 mm
Height: 3230 mm
Weight: approx. 20,000 kg
Gedpfjff Hvlsx Af Djua
Mažas skelbimas
Saerbeck
1 118 km
Spaudžiamasis stabdis 6 metrai 600 tonų
DURMAAD-S 60600
Skambinti
Būklė: naujas, Gamybos metai: 2024, Everything can be configured according to your requirements, with very short production and delivery times.
We are happy to provide you with further information upon request.
Technical Specifications:
Bending force: 600 tonnes
Bending length: 6,050 mm
Distance between supports: 5,100 mm
Stroke: 365 mm
Installation height: 700 mm
Throat depth: 510 mm
Table height: 990 mm
Table width: 154 mm
Y rapid traverse: 80 mm
Y working speed: 7 mm/sec
Y return speed: 80 mm/sec
X axes working speed: 350 mm/sec
R axes working speed: 300 mm
R axes travel: 250 mm
X axes distance: 750 mm
Motor power: 55 kW
Length: 8,050 mm
Width: 3,200 mm
Height: 4,250 mm
Weight: 72,000 kg
Standard Equipment
Y1, Y2, X, R – 4 axes
Control unit – CNC ModEva15T
Servo drive backgauge & linear guided ball screw system (X-R)
CNC crowning
European style tool clamping system
Movable support arms (with T-slot and stopper)
Specially designed hydraulic block and valves to international standards
Electrical equipment to international standards
Optional Equipment
Control unit – ModEva Premium, 69T and 66T
CE Manual F. AKAS II M FPSC-B-C + safety covers with switch
CE F. AKAS-LC II AKAS-3 M motorized + FPSC (Safety PLC)
CE BLVT Safety – only for tandem machines
Z1, Z2 axes
X1, X2 axes
Bil0h3uvee
R1, R2 axes
Delta X axis, +/- 250mm stroke or +/- 125mm CNC-controlled
X axis = 1000 mm – rear protection with light curtain
AP3-AP4 bending aid
Height-adjustable laser angle measurement system
Quick clamping system
Hydraulic and pneumatic tool clamping systems
Top and bottom tools
Gsdpfsfir U Nsx Af Djua
Bottom tool positioning system
Parking area
Central lubrication system
Oil cooler
Additional backgauge finger and extra movable support arms
Special packaging for overseas transport
Request more information
Mažas skelbimas
Saerbeck
1 118 km
PRESS STABDYS
Durma | Direkt vom HerstellerPB4
Skambinti
Būklė: naujas, Gamybos metai: 2024, PB 4 Bending Center
Guedpfeg Adi Rjx Af Dja
With the Durma Bending Center, you achieve flawless results at maximum speed and safety, featuring fully automatic tool change and minimal setup times. The Durma Bending Center, with its robust machine body, outstanding precision, ergonomic design, and diverse bending functions, will play a significant role in your operations. The configurations we deploy in punching and laser machines can be technically combined, providing the highest time savings in your production processes. Our advanced Smart Consumption system, operator-independent standard production, and the Durma CNC Bending Center—manufactured under stabilized thermal conditions—offer you opportunities to achieve cost savings in the face of rising energy prices. The Durma Bending Center can perform both simple and complex bending operations for sheet materials with a thickness ranging from 0.5 to 4 mm in fully automatic mode. With its user-friendly, intuitive interface and software that simplifies part programming, this product will be your reliable solution partner.
Technical Data:
Maximum bending length: 2800 mm
Minimum bending length: 350 mm
Maximum sheet entry length: 3050 mm
Maximum sheet entry width: 1524 mm
Minimum bendable width: 150 mm
Maximum bending height: 254 mm
Maximum bending depth: 50 mm
Maximum sheet rotation diameter: 3300 mm
Bending force: 500 kN
Press force: 1000 kN
Maximum sheet thickness:
For Fe 410 N/mm2 material: 3.2 mm
For Acc. Inox 600 N/mm2 material: 2.2 mm
For Aluminum 260 N/mm2 material: 4 mm
Minimum sheet thickness: 0.5 mm
Maximum bending angle per stroke: ±135°
Advanced Features:
Negative bending capability on final bend: Standard
Automatic tool change option: ATS (Standard)
Auxiliary clamping tools: Standard
Lower auxiliary bending tools: AHD (Optional)
Upper auxiliary bending tools: AB (Optional)
Reverse bending configuration: AB (Optional)
Mažas skelbimas
Saerbeck
1 118 km
PRESS STABDYS
DURMAAD-S 30320
Skambinti
Būklė: naujas, Gamybos metai: 2024, Bending force: 320 t
Year of manufacture: New (delivery time 6-8 weeks)
Control: DT 15
Bending length: 3050 mm
Gedpfx Afofifg Ho Doua
Distance between columns: 2600 mm
Y rapid speed: 160 mm/s
Y working speed: 10 mm/s
Y return speed: 140 mm/s
Motorized crowning
Table length: 630 mm
Table width: 154 mm
Table height: 900 mm
Stroke: 365 mm
Throat depth: 410 mm
2 support arms
2 backgauge fingers
X-axis travel speed: 250 mm/s
R-axis working speed (max.): 140 mm/s
R-axis travel path: 250 mm
Standard equipment:
Y1, Y2, X (3-axis)
Y1, Y2, X = 650 mm (double guide, aluminum)
D-BEND software for 3D bending simulation and alignment
Manual crowning
R-axis, manual
Backgauge with motor and linear guide, ball screw
Backgauge fingers with height adjustment (R-axis, manual)
CE die holder system (upper dies)
Front sheet support arms, sliding (with T-slot and stops)
Hydraulic blocks and valves in special design, in accordance with international standards
Electrical equipment according to international standards
Option:
CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC)
CNC motorized crowning
Y1, Y2, X, R (4-axes)
CNC motorized crowning
Motor power: 37 kW
Oil tank capacity: 250 liters
Length: 4300 mm
Width: 1820 mm
Height: 3230 mm
Weight approx. 17,250 kg
Mažas skelbimas
Saerbeck
1 118 km
PRESS STABDYS
DURMAAD-S 40220
Skambinti
Būklė: naujas, Gamybos metai: 2024, Press brake AD-S 40220 | 4 meters, 220 tons
All configurations available upon request, with very short production and delivery times.
Further information gladly provided upon request.
Gsdpfxsfirx De Af Deua
Technical Data:
Bending force: 220 tons
Bending length (mm): 4050
Distance between uprights (mm): 3600
Stroke (mm): 265
Installation height (mm): 530
Throat depth (mm): 410
Table height (mm): 900
Table width (mm): 104
Y-axis rapid traverse (mm/sec): 160
Y-axis working speed (mm/sec): 10
Y-axis return speed (mm/sec): 140
X-axis working speed (mm/sec): 250
R-axis working speed (mm): 140
R-axis stroke: 250
X-axis distance (mm): 650
Motor power: 22 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 14,750 kg
Standard Equipment:
Controller: CNC Cybelec ModEva 19T
CNC-controlled motorized crowning
European tooling clamping system / Durma clamping system available on request
Extended Equipment:
CE-certified safety system for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC)
CNC-controlled backgauge axes: X1, X2, R1, R2, Z1, Z2
Controller: DELEM DA-66T
Delem 66T/69T or Durma controller selectable
DAM – Durma angle measurement system
Hydraulic upper tool clamping Wila NSCL-I-HC/UPB – PRO – 180 t/m
Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB – PRO
Powerpack for hydraulic clamping
D-BEND 3D CAD/CAM import & simulation software
AP3 & AP4 bending aids
Available in 750 mm to 1,500 mm
Parking area for support arms (1,000 mm)
TANDEM preparation
Laser bend line
Oil heater
Central lubrication, manual or motor-driven
Air-conditioning unit for control cabinet
Mažas skelbimas
Saerbeck
1 118 km
PRESS STABDYS
DurmaAD-S 30175
Skambinti
Būklė: naujas, Gamybos metai: 2024, Manufacturer: DURMA
Model: AD-S 30175
Year of Manufacture: 2020
Bending Length: 3050 mm
Pressing Force: 1750 kN
Control: CNC DT-15
Operating Hours: 33 h
Bcq29blmc8
Backgauge Controlled Axes: X, R
Distance Between Uprights: 2600 mm
Stroke Length: 265 mm
Installation Height: 530 mm
Table Width: 104 mm
Table Height: 900 mm
Throat Depth: 410 mm
X-Axis Travel: 650 mm
X-Axis Travel Speed: 250 mm/s
Guodpfx Asd Srk Sef Dsa
Approach Speed: 160 mm/s
Bending Speed: 10 mm/s
Return Speed: 100 mm/s
Dimensions L/W/H: approx. 4250x1700x2750 mm
Weight: approx. 11,500 kg
Standard Equipment
Y1, Y2, X = 650 mm
Control: CNC DT-15
European Tool Clamping System
60 mm Die Holder (only for European die system)
2 front-movable support arms with linear guides over the entire length
Backgauge Motor Servo
Lateral safety covers
CE marking
Optional Equipment
CE-compliant safety system with manual FIESSLER AKAS II M-FPSC
Controlled axes: X, R; Z-axes manually adjustable
CNC-controlled motorized crowning
European top/tooling and bottom tooling by Rolleri
The machine can be inspected and demonstrated at our showroom in Staufenberg by prior appointment anytime.
Further machines are available for demonstration at our facility in Staufenberg.
Further information is available on request.
Mažas skelbimas
Saerbeck
1 118 km
Spaudžiamasis stabdis 8 metrai 400 tonų
DURMAAD-R 80400
Skambinti
Būklė: naujas, Gamybos metai: 2024, Everything can be configured to your specifications; production and delivery times are very short.
Upon request, we will be happy to provide you with further information.
Technical data available on request.
AD-R 80400
Guodpfx Afsfin N So Dja
Bending force: 400 tons
Bending length: 8050 mm
With over 60 years of experience in research and manufacturing of sheet metal processing machines, and annual production of 8,000 machines across three technologically advanced manufacturing plants covering a total area of 150,000m², the Durmazlar Group and its DURMA machines are today among the internationally recognized manufacturers in their sector, distributing products in 120 countries worldwide.
With its location in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the central Hessen region. Here, we are your direct contact from Durmazlar, providing you with competent support and advice when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to experience our machines first-hand, to be convinced of the quality and precise technology of our products, and to receive the best possible advice, tailored to your corporate objectives. Our mission is to be your on-site direct contact and offer you a full range of services, including training and customer support.
We are happy to assist you from our German location—from initial consultation and purchase, throughout the lifetime of your machine. With our German branch, we are always locally available whenever you need us, ensuring quick and efficient response times. We are your reliable partner for technologically advanced solutions in sheet metal processing.
Mažas skelbimas
Saerbeck
1 118 km
PRESS STABDYS
DURMAAD-S 30135
Skambinti
Būklė: naujas, Gamybos metai: 2024, veikimo valandos: 32 h, Manufacturer: DURMA
Model: AD-S 30135
Year of manufacture: 2018
Bending length: 3050 mm
Press force: 1350 kN
Control system: CNC DT-15
Operating hours: 0 h
Controlled 3 axes: Y1, Y2, X
Distance between uprights: 2600 mm
Stroke length: 265 mm
Installation height: 530 mm
Table width: 104 mm
Table height: 900 mm
Throat depth: 410 mm
X-axis travel range: 650 mm (dual guide, aluminum)
X-axis travel speed: 250 mm/s
Approach speed: 160 mm/s
Bending speed: 10 mm/s
Return speed: 120 mm/s
Dimensions (L/W/H): approx. 4200x1680x2750 mm
Gedpfx Afjdx Rd Ns Doua
Weight: approx. 10,250 kg
Standard equipment
Y1, Y2, X = 650 mm
Control system: CNC DT-15
Manual crowning
European tool clamping system
60 mm die holder (for European die system only)
2 front-position adjustable support arms with linear guide along the entire length
Backgauge: motorized with linear guide & ball screw
Backgauge fingers height-adjustable, R-axis manual
Backgauge: servo motor
Side safety covers
CE marking
Extended equipment
CE safety system with manual FIESSLER AKAS II M-FPSC-B-C + safety cover & switch
The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time.
Additional machines are available for demonstration at our facility in Staufenberg.
Further information available upon request.
Mažas skelbimas
Saerbeck
1 118 km
PRESS STABDYS
DURMAAD-S 40400
Skambinti
Būklė: naujas, Gamybos metai: 2024, High-Performance Press Brake AD-S 40400 by DURMA: A Masterpiece of Engineering!
Gjdorwniqopfx Af Doua
The DURMA AD-S 40400 press brake combines precision, power, and efficiency in a robust package specifically designed for demanding environments. This model not only delivers outstanding performance and reliability but also comes with a wide array of high-quality standard features and options, making it an indispensable tool in your production.
Technical Data:
・Bending force: 400 tons
・Bending length: 4050 mm
・Distance between uprights: 3400 mm
・Rapid traverse speed: 100 mm/s
・Working speed: 8 mm/s
・Return speed: 80 mm/s
・Motor power: 37 kW
・Weight: approx. 27,760 kg
Features and Benefits:
・Control: Optional DELEM DA-66T touchscreen control for unmatched speed and ease of operation.
・Robust construction: Reinforced frame for loads up to 200 tons
・Operational flexibility: Supplied with 2 support arms and a backgauge with two finger blocks and CNC-controlled X axis for versatile applications.
・Enhanced motor performance: Equipped with AC servo motor for backgauge and ball screws, offering fast and precise movements.
・Advanced safety: Manually adjustable F.AKAS II M CE safety system protects the operator without compromising performance.
Standard Equipment:
・Y1, Y2, X (=650mm), R manual (2 stop fingers)
・DT 15 control unit
・Manually adjustable F.AKAS II M CE safety system (on the ram) (CE)
・CNC crowning
・Support arms with T-slot and spring flap stop, laterally adjustable on linear guide
・Durma tool clamping system
・AC servo motor for backgauge and ball screws
・Side and rear guards
Options:
・DELEM DA-66T touchscreen control for intuitive operation
・6-Axis – Advanced backgauge with X/R/Z1/Z2, X=750 mm options
・Reinforced frame designed for 200 tons per meter load capacity, total maximum pressing force 400 tons
Price information:
・The stated price applies exclusively to the machine. Tools and freight charges are not included.
Mažas skelbimas
Altbach
1 223 km
Paspauskite stabdį - hidraulinis
AmadaHFBO 103
Skambinti
Būklė: naudotas, Gamybos metai: 1998, Spaudimas 100 t
Lankstymo ilgis 3100 mm
Stovų atstumas 2750 mm
Spaudimo sijų eiga 200 mm
Atstumas tarp viršutinės ir apatinės sijų 470 mm
C išpjova 350 mm
X1+X2 ašių eiga programuojama per CNC - 600 mm
R1+R2 ašių eiga programuojama per CNC - 150 mm
Z1+Z2 ašių eiga programuojama per CNC - 0–2500 mm
Gujdpfjyw Tl Usx Af Dea
Pristatymo greitis 100 mm/sec
Atidarymo greitis 0–10 mm/sec
Darbo valandos 8500 h
Ilgis 3600 mm
Plotis 1900 mm
Aukštis 2600 mm
Svoris 6750 kg
Bendras energijos poreikis 9 kW
Reikalinga vieta apie 4x2x3 m
Visos staklės bet kada gali būti apžiūrimos įjungtos.
Staklių demonstracija galima bet kuriuo metu.
Mažas skelbimas
Altbach
1 223 km
Paspauskite stabdį - hidraulinis
AMADAHFBO 103
Skambinti
Būklė: naudotas, Gamybos metai: 1999, Spaudimas: 100 t
Lenkimo ilgis: 3100 mm
Stovų tarpas: 2750 mm
Presavimo sijos eiga: 180 mm
Atstumas tarp viršutinės ir apatinės sijos: 470 mm
C-išpjova: 350 mm
X1+X2 ašių eiga (CNC programuojama): 600 mm
R1+R2 ašių eiga (CNC programuojama): 120 mm
Z1+Z2 ašių eiga (CNC programuojama): 300–2700 mm
Godpfx Ajyw Tl Isf Djua
Pristatymo greitis: 100 mm/sek
Lenkimo greitis: 0–10 mm/sek
Atidarymo greitis: 100 mm/sek
Darbo valandos: 29000 h
Ilgis: 3500 mm
Plotis: 1950 mm
Aukštis: 2550 mm
Svoris: 6700 kg
Bendras galios poreikis: 8 kW
Užimamas plotas apie: 4x2x2,5 m
Valdymas: CNC
Visos mašinos bet kada gali būti apžiūrėtos prijungtos prie tinklo.
Mašinų demonstracija galima bet kuriuo metu.
Mažas skelbimas
Siedlce
352 km
BŪGNIS ŠLIUOTUVAS
CORMAKMM3146 400V
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Main advantages of the machine
- Reinforced construction – a rigid, heavy frame minimizes vibrations and ensures stability even during intensive use.
- Precise thickness adjustment – the mechanical height gauge allows you to set the desired working thickness accurately.
- Precisely balanced sanding drum – made from drawn aluminium for uniform contact with the workpiece and efficient cooling.
- Versatile application – suitable for removing old paint, varnish, rust, as well as for smoothing and deburring operations.
- Metal drive coupling – provides durable and reliable torque transmission from the motor to the drum.
- Working width up to 920 mm – allows sanding of wide panels in two passes.
Construction and technology
The CORMAK MM3146 model is distinguished by its robust, industrial-grade construction. The main motor, with a power of 1.5/2.2 kW (S1/S6), combined with a reinforced feed drive (60 W), ensures sufficient power reserve for intensive, continuous operation. The variable feed speed system (0–4 m/min) enables adjustment of processing speed to the type of material and the desired finish quality.
The sanding belt, measuring 2100 × 75 mm, is driven by a high-speed shaft (2,800 rpm), enabling fast and efficient stock removal. The sanding drum self-cools during operation, eliminating the risk of surface overheating. The side fence has been further reinforced to improve parallelism and sanding stability across the entire working width.
Precision and work efficiency
The CORMAK MM3146 drum belt sander guarantees repeatable results thanks to its mechanical height adjustment system with an accurate scale. Minimum processed thickness is 3.5 mm, and the maximum is 100 mm, allowing for machining both thin plates and massive structural elements. The working width of 460 mm in a single pass (or 920 mm with double feed) provides productive flexibility, even for large production batches.
Applications
The CORMAK MM3146 through-feed belt sander is suitable for use in:
- joinery and furniture manufacturing plants,
- wood restoration studios,
- metal workshops for deburring,
- production of plastic components,
- finishing lines for flat surface treatment.
Standard equipment
- Precision aluminium sanding drum
- Metal drum drive coupling
- Worktable 460 × 465 mm
- Conveyor belt 1120 × 450 mm
- Thickness gauge with precise scale
- Reinforced side guide
- Extraction port Ø62 mm
Optional equipment
- Dust extraction system with chip separator
- Sets of sanding belts with various grits
- Infeed table with rollers
- Mobile stand with brake
Technical specifications
MOTOR POWER: S1/S6 1.5/2.2 kW 400V
BELT SPEED: 2,800 rpm (for wood and metal)
Gjdew Hb D Djpfx Af Deua
BELT DIMENSIONS (DRUM): 2100 x 75 mm
CONVEYOR BELT DIMENSIONS: 1120 x 450 mm
WORKTABLE DIMENSIONS: 460 x 465 mm
EXTRACTION PORT DIAMETER: Ø62 mm
FEED SPEED: 0–4 m/min
MINIMUM MATERIAL THICKNESS: 3.5 mm
MAXIMUM WORKING HEIGHT: 100 mm
WORKING WIDTH: 460 (or 920) mm
REINFORCED FEED MOTOR: 60 W
DIMENSIONS (L×W×H): 880 x 540 x 1230 mm
NET/ GROSS WEIGHT: 134/160 kg
Mažas skelbimas
Siedlce
352 km
Spaudos stabdys
CORMAKEURO PB 160X3200
Skambinti
Būklė: naujas, Gamybos metai: 2026, Main Features:
- Front supports: 2 pieces on linear guides, ensuring stability during bending operations
- Backgauge adjustment (X-axis): automatic
Gedpfx Afjwq Dm Ns Djua
- Beam adjustment (Y1, Y2 axes): automatic
- Height adjustment of fingers (R-axis): manual (servo drive option)
- Two-sided punch clamping: quick AMADA-type mounting for fast tool changes
Technical Specifications
- Max. bending thickness (S235): up to 8.0 mm
- Nominal force: 1600 kN
- Max. bending length: 3200 mm
- Throat depth: 320 mm
- Max. ram stroke: 180 mm
- Max. open height: 455 mm
- Distance between uprights: 2600 mm
- Backgauge travel: 500 mm
- Motor power: 11.0 kW
- Length: 3300 mm
- Width: 1650 mm
- Height: 2500 mm
- Weight: 9600 kg
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Siedlce
352 km
Spaudos stabdys
CORMAKCNC SERVO ELITE 32170 DA53TX
Skambinti
Būklė: naujas, Gamybos metai: 2026, Cormak press brakes are advanced machines that enable precise sheet metal bending through appropriately selected punches and dies. Our range includes models equipped with DELEM DA-53TX controllers as standard, as well as optional controllers: DELEM DA53T, DA-58T, DA-66T, DA69T, and CYBELEC 12, offering a wide array of functions to tackle even the most demanding bending tasks.
Main Features:
- Front supports: 2 units on linear guides, providing stability during bending operations
- Automatic Y1, Y2 axis adjustment
- Backgauge adjustment (X axis): servo drive with encoders
- R axis adjustment: servo drive with encoders
- Automatic crowning adjustment
- Double-sided punch clamping: quick AMADA-type mounting for rapid tool changes
Technical Specifications:
- Max. bending sheet thickness (S235): up to 6.0 mm
- Nominal pressing force: 1700 kN
- Max. bending length: 3200 mm
- Throat depth: 320 mm
- Max. ram stroke: 120 mm
- Max. open height: 390 mm
- Distance between uprights: 2700 mm
Gujdeuw Scdjpfx Af Doa
- Backgauge travel: 600 mm
- Motor power: 9.5 kW
- Length: 3870 mm
- Width: 1550 mm
- Height: 2460 mm
- Weight: 7400 kg
Additional equipment and models with different pressing forces are available. Please contact the seller for more information.
Mažas skelbimas
Siedlce
352 km
Spaudos stabdys
CORMAKUltimate PRO 32170
Skambinti
Būklė: naujas, Gamybos metai: 2026, Cormak press brakes are advanced machines enabling precise sheet metal bending thanks to carefully selected punches and dies. Our range includes models equipped with DELEM DA-53TX controllers as standard, with optional DELEM DA53T, DA-58T, DA-66T, DA69T, and CYBELEC 12 controllers, providing a wide range of functions that allow the execution of even the most demanding bending tasks.
Key Features:
- Front supports: 2 pcs, ensuring stability during bending operations
- X Axis: FULLY AUTOMATIC SERVO
- Y1, Y2 Axes: AUTOMATIC (servo motor optional)
- R Axis: Automatic SERVO
- Automatic crowning/deflection compensation
- Front support on linear guides
- Machine is equipped as standard with hardened, segmented punches and 4V dies (42CrMo)
Machine Description:
Ultimate series press brakes are advanced tools used in the industry for edge processing and material bending. These versatile machines enable precise and efficient finishing of edges for various types of materials, such as steel, aluminium, and plastics.
Ultimate press brakes are designed for performance and reliability. They feature a robust construction that guarantees stability during operation. Advanced control systems allow programming of various work parameters, such as bending speed, angle, and pressing force.
One of the main advantages of the Ultimate press brake is its ease of use. The intuitive user interface lets the operator easily program and monitor the processing. Additionally, the machines are fitted with advanced safety systems for secure operation. Thanks to their high performance, the EASY press brakes are the ideal solution for manufacturers who require fast and precise edge processing. They are suitable for various industries, including metalworking, joinery, furniture production, and plastics processing.
Gsdpfx Afewq Dyve Deua
Technical Specifications:
- Max. sheet thickness (S235): up to 6.0 mm
- Nominal force: 1700 kN
- Max. bending length: 3200 mm
- Throat depth: 550 mm (option: 620 mm)
- Max. stroke of moving beam: 200 mm (option: 300 mm or 400 mm)
- Max. open height: 390 mm
- Distance between uprights: 2700 mm
- Backgauge travel: 650 mm (option: 1000 mm)
- SERVO motor power: 7.5 kW
- Length: 3870 mm
- Width: 1600 mm
- Height: 2600 mm
- Weight: 7500 kg
Mažas skelbimas
Siedlce
352 km
BŪGNIS ŠLIUOTUVAS
CORMAKMM3166P 400V
Skambinti
Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The CORMAK MM3166P wide belt sander is a robust and reliable machine, ideal for both home workshops and professional carpentry shops. Thanks to its features and specifications, it enables precise and fast sanding of wood, guaranteeing a perfect finish for every project.
- Two sanding rollers ensure uniform and precise sanding.
- The conveyor belt facilitates material handling and ensures smooth sanding operation.
- Powerful 2200 W + 120 W motor ensures effective sanding even of hard materials.
- Adjustable sanding belt speed allows you to match the pace to the type of material being processed.
- Dust extraction system provides a cleaner work environment and protects the operator from inhaling dust.
- Solid construction offers durability and stability during operation.
- Voltage selection: 230 V or 400 V (50 Hz) – adjust to your needs.
- Large sanding belt width (635 mm) allows quick sanding of large surfaces.
- Workpiece thickness: min. 7 mm, max. 125 mm.
- Sanding roller diameter: 150 mm.
- Sanding belt speed: 14 m/s.
Guedsxfhh Depfx Af Doa
- Two 100 mm extraction ports allow connection to a dust extraction system.
Technical Data:
Belt length [mm]: 800
Belt width [mm]: 635
Radius [R]: 120
Max. workpiece thickness [mm]: 130
Main motor [kW]: 2.2
Voltage [V]: 400
Frequency [Hz]: 50
Speed [RPM - 220 V]: 1800
Feed motor [W]: 120
Feed speed [m/min]: 1.8 - 7.3
Extraction port diameter [mm]: 100
Net/Gross weight [kg]: 220 / 260
Machine height [mm]: 1113
Machine width (side) [mm]: 1100
Machine width (top) [mm]: 1060
Roller length [mm]: 635
Manufacturer: Cormak
Mažas skelbimas
Siedlce
352 km
BŪGNIS ŠLIUOTUVAS
CORMAKMM3146 230V
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Machine Description
The latest single drum sander model with dust collection bag from Cormak. This sander is enhanced with new technological solutions, ensuring more precise processing of wood, metal, and plastic materials (removal of old paint, derusting, sanding, deburring, etc.).
Thanks to the efforts of our technical and engineering team, we have achieved:
- A massive frame, significantly heavier than the previous version
- Reinforced side guide for the sanding drum, improving rigidity and offering high machining accuracy across a working width of 460 (920) mm
- Metal clutch transferring drive from the motor to the sanding drum
- Precision mechanical gauge for easy reading of the desired sanding thickness
- The sanding drum, made of drawn aluminum, is precisely balanced and self-cooling, and is supplied as standard with the machine
Technical Specifications
MOTOR POWER: S1/S6 1.5/2.2 kW 230V
BELT SPEED: 2800 rpm (for wood and metal)
BELT SIZE ON ROLL: 2100 x 75 mm
FEED BELT SIZE: 1120 x 450 mm
WORKTABLE DIMENSIONS: 460 x 465 mm
EXTRACTION PORT DIAMETER: Ø62 mm
FEED SPEED: 0~4 m/min
MINIMUM MATERIAL THICKNESS: 3.5 mm
MAXIMUM WORKING HEIGHT: 100 mm
Guodpow Hb Atsfx Af Dja
WORKING WIDTH: 460 (920) mm
REINFORCED FEED MOTOR: 60 W
DIMENSIONS: 880 x 540 x 1230 mm
NET/GROSS WEIGHT: 134/160 kg
Manufacturer: Cormak
Palengviname jums paiešką: "stabdžių būgnas"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Stabdžių Būgnas (2 194)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Bado Stabdžių Paslaugos Mašina
- Būgnas
- Būgnas Dengimas
- Būgnų Dalys
- Drožimo Staklės
- Dvigubo Stelažo Paspauskite
- Pagrindinės Plokštės
- Paspauskite Stabdžių Įrankis
- Poliravimo Būgnas






































































































































































































