Slt 100 pirkti naudotą (25 499)

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used to carry out temperature shock tests and is typically utilized in industry, research, and quality assurance sectors. Application areas: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Data: Type: TSS-70/130 Test chamber volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change speed: - Max. 100 K/min mean for shock test cycles (without heat radiation) Changeover speed: - ≤ 15 min between -65°C and +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical Data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Rated current: approx. 29 A On-site fuse: 32 A slow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / Features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external test item control - Fault signal on potential-free contact Load capacity up to 30 V DC, 2 A EMC tested Technical Design: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / transfer basket made of stainless steel, material no. 1.4301 - Insert rack made of stainless steel wire - Tubing port NW 50 with sealing plug - Compressed air connection 1/4" male thread - Condensate drain, non-pressurized R 1/2" female thread - Safety door locking mechanism - Lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Intake dimensions approx.: 1990 x 940 x 1652 mm Chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Duodpey Hkd Hsfx Ahrow Further Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh Important safety information for buyers: The following measures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Djdpfxezizmus Ahrsuw Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Dusdpfx Ahjzizmnjrow Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dusdpfx Ahjzizmborsw Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: naudotas, Espec Model: TSD-100 100-liter usable chamber for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Dodpjzizl Refx Ahrouw Operating hours counter Mobile design 2 stainless steel specimen baskets Cable entry Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. Power consumption: 32A Condition: used Weight: 1100 kg Important information for your peace of mind as a buyer! The following points are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerants if required 3. Leak test with certificate 4. After successful inspection, each chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to alterations and errors!) For further questions, please do not hesitate to contact us by phone.

Būklė: naudotas, mytron Model: T2240 Water-cooled temperature chamber Technical data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 liters Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature stability: +/- 0.5 °K Spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, Inlet and outlet: 1'' female thread Cooling water shut-off via solenoid valve when device is OFF Fault display for chiller malfunction Cooling water consumption: inlet temp. approx. 15 °C, approx. 15 l/min, outlet temp. approx. 22 °C (continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Duedpfxozizg Uj Ahrow Power consumption: approx. 6.5 kVA Protection: 3 x 20.0 A time-lag, 3 x 10.0 A time-lag Lighting: 25 watt each, left and right sides of test chamber Exhaust connection: DN 100 mm push-fit system Safety device: Electronic overtemperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing window: triple-glazed 130 x 360 mm Refrigerant: R404A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Duedpfxszizghj Ahrjw - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface Duodpfozizdysx Ahrjw - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: paruoštas naudoti (naudotas), Galimas automatinis kubelių ir juostelių pjaustytuvas „Treif“. Padavimo zonos matmenys X/Y/Z: 400 mm/100 mm/100 mm, pjūvio skerspjūvio matmenys X/Y: 96 mm/96 mm, pjūvio ilgio diapazonas: 0,5 mm–32 mm, didžiausias našumas: apie 1200 kg/val., mašinos matmenys X/Y/Z: apie 1400 mm/850 mm/1100 mm, svoris: apie 275 kg. Galima apžiūrėti įrangą vietoje. Dedpfx Aezkvmlohrsuw

Būklė: naudotas, Gear motor, electric motor - Speed: 3.55 rpm Djdpfx Ahjc Nq Udjrouw - Power: 0.25 kW - Design: B5 (flange-mounted) - Shaft diameter: Ø 40 mm - Protection class: IP 54/55 - Brake - Quantity: 2 units available - Price: per piece - Dimensions: 600/250/H280 mm - Weight: 43 kg

Būklė: naudotas, Geared motor, electric motor, electric geared motor Dedpfx Ajc Uz Hzshreuw - Speed: 23/100 rpm - Power: 0.15/0.6 kW - Design: B3 - Shaft diameter: 30 mm - Protection class: IP 54 - Dimensions: 560/230/H200 mm - Weight: 30 kg

Būklė: naudotas, Gear motor, electric motor, geared electric motor Dsdpfx Ajc U Rhhjhrouw - Power rating: 0.37 kW - Shaft diameter: 22 mm - Shaft speed: 100 rpm - Design type: B5 - Protection class: IP 54 - Quantity: 1x motor available - Price: per piece - Dimensions: 370/140/H200 mm - Weight: 12 kg

Būklė: naudotas, Straightedge, straight guide rail, steel rule - Angle: 90° - Dimensions: 3000/100/H15 mm Duedpfsfiqrqox Ahrow - Weight: 28 kg

Būklė: naudotas, Drill stand, drilling stop, drill press stand, drilling jig, drill bushing jig Duodpfx Ahed Rh Rcerew - Quick-clamping device - Max. height: 100 mm - Dimensions: 400/240/H220 mm - Weight: 22 kg

Būklė: naudotas, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder Dujdpfed Sti Sex Ahrew - Festo type: DC-70-100 - Stroke: 144 mm - Max. pressure: 12 bar - Price: per piece - Quantity: 2 pcs - Dimensions: 92/92/H380 mm - Weight: 4.4 kg

Būklė: naudotas, Slotting discs, window milling tool, carbide insert window construction tool, wood milling tool, wood router - Slotting discs, milling tools for wooden windows, wood router, cutter head, milling tool, wood router, profile cutter - Manufacturer: VIVALDI, window milling tool Dusdeg Uxguspfx Ahrsw - Outer cutter diameter: Ø 195 mm - Height: 100 mm - Bore: Ø 40 mm - Weight: 9.1 kg

Būklė: naudotas, Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston diameter: 100 mm -Piston rod: Ø 45 mm -Stroke: 100 mm -Universal application -Quantity: 1 available -Price: per unit -Dimensions: 480/145/H130 mm Duodpfx Ahed Evu Aorow -Weight: 19 kg

Būklė: naudotas, adjustable geared motor, variable speed gear motor, electric motor -Gearbox Manufacturer: MOTOVARIO TKF/5 -Motor Manufacturer: Ansaldo A1C0712CA249 -Motor power: 0.37 kW -Speed range without bevel gearbox: 190-1000 rpm -Speed range with bevel gearbox: 19-100 rpm -Motor: adjustable -Hollow shaft: Ø 22 mm -Mounting type: B14 flange, right-angle -Quantity: 1 motor available Dedpoc I Rk Ijfx Ahrsuw -Price: per unit -Dimensions: 530/200/H220 mm -Weight: 22 kg

Būklė: naudotas, Linear actuator, linear gearbox, lifting gearbox, spindle drive, pneumatic actuator, slide unit, guide, electromechanical linear axis Djdjfdd Axopfx Ahrouw -Festo: Mini-slide 170587 JN02 -Stroke: 50 mm -Dimensions: 123/65/H40 mm -Weight: 0.7 kg

Būklė: naudotas, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder -Festo Type: DN-80-100-PPV -Piston diameter: 80 mm -Piston rod: Ø 25 mm Duedsffk Iqspfx Ahrow -Stroke: 100 mm -Max. pressure: 12 bar -Pneumatic cushioning: adjustable on both sides -Dimensions: 320/95/H125 mm -Weight: 4.8 kg

Būklė: naudotas, Frame micrometers, micrometer screw - Measuring range: 75 - 100 mm Dsdjfn Am Tjpfx Ahrsuw - Delivery: as-is, as inspected - Accessories: missing, see photo - Other sizes: available - Box dimensions: 265/145/H30 mm - Total weight: 0.7 kg

Būklė: naudotas, Series limit switch, button, end switch Dedpfedpvwmjx Ahrsuw -Type: BNS519-B5D16-100-1 -Price: per unit -Quantity: 2 available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Būklė: naudotas, Gear motor, electric motor, stop motor, drive motor Djdob Uhptjpfx Ahrouw - Comes from a Homag double-sided edge banding machine - Power: 3.2 kW - Speed: 2850 rpm - Design: B5 - Shaft: Ø 28 mm - Protection class: IP54 - With external fan: 0.05 kW, 2520 rpm - Dimensions: 440/240/H210 mm

Būklė: naudotas, Frequency converter, frequency changer, drive converter, controller, variable speed drive - Input: 380 V 50 Hz - Output: 380 V 100 Hz - Power: 18 kVA Dujdpfx Ascblxmjhrsw - Dimensions: 1160/480/H540 mm - Weight: 290 kg

Būklė: naudotas, Three-phase electric motor - Power: 3 kW - Speed: 1420 rpm - Shaft diameter: 28 mm - Mounting type: B5 - Protection rating: IP44 Duodscwn Hbepfx Ahrjw - Dimensions: 390/250/H280 mm - Weight: 37 kg